2007-04-19 1 BAS3010B... medium power af schottky diode ? forward current: 1 a ? reverse voltage: 30 v ? low forward voltage, low reverse current ? for high efficiency dc/dc conversion, fast switching, protection and clamping applications ? pb-free (rohs compliant) package 1) ? qualified according aec q101 BAS3010B-03w type package configuration marking BAS3010B-03w sod323 single 2/ red maximum ratings at t a = 25c, unless otherwise specified parameter symbol value unit diode reverse voltage 2) v r 30 v forward current 2) i f 1 a average rectified forward current (50/60hz, sinus) i fav 1 repetitive peak forward current ( t p 1 ms, d 0.5) i frm 3.5 non-repetitive peak surge forward current ( t 10 ms) i fsm 10 junction temperature t j 150 c operating temperature range t o p -65 ... 125 storage temperature t st g -65 ... 150 1 pb-containing package may be available upon special request 2 for t a > 25c the derating of v r and i f has to be considered. please refer to the attached curves.
2007-04-19 2 BAS3010B... thermal resistance parameter symbol value unit junction - soldering point 1) r thjs 82 k/w electrical characteristics at t a = 25c, unless otherwise specified parameter symbol values unit min. typ. max. dc characteristics reverse current 2) v r = 5 v v r = 10 v v r = 30 v i r - - - - - - 5 10 20 a forward voltage 2) i f = 1 ma i f = 10 ma i f = 100 ma i f = 500 ma i f = 1 a v f - - - - - 230 300 360 420 480 280 350 420 480 550 mv ac characteristics diode capacitance v r = 5 v, f = 1 mhz c t - 33 40 pf 1 for calculation of r thja please refer to application note thermal resistance 2 pulsed test: t p = 300 s; d = 0.01
2007-04-19 3 BAS3010B... diode capacitance c t = ? (v r ) f = 1mhz 0 5 10 15 20 v 30 v r 0 20 40 60 80 pf 120 c t reverse current i r = ? ( t a ) v r = parameter 0 25 50 75 100 c 150 t a -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 a i r vr = 30 v 20 v 10 v 5 v reverse current i r = ? ( v r ) t a = parameter 0 5 10 15 20 v 30 v r -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 a i r ta = 25 c ta = 125 c ta = 85 c forward voltage v f = ? ( t a ) i f = parameter -50 -25 0 25 50 75 100 c 150 t a 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 v 0.6 v f if = 1 a 500 ma 100 ma 10 ma
2007-04-19 4 BAS3010B... forward current i f = ? ( v f ) 0 0.1 0.2 0.3 0.4 v 0.6 v f -4 10 -3 10 -2 10 -1 10 0 10 a i f 125 c 85 c 25 c -40 c permissible reverse voltage v r = ? ( t a ) t p = parameter, duty cycle < 0.01 device mounted on pcb with r th = 160 k/w 0 25 50 75 100 c 150 t a 0 5 10 15 20 25 v 35 v rmax tp=300s tp=100ms dc forward current i f = ? ( t s ) 0 15 30 45 60 75 90 105 120 c 150 t s 0 200 400 600 800 ma 1200 i f
2007-04-19 5 BAS3010B... package sod323 package outline foot print marking layout (example) standard packing reel ?180 mm = 3.000 pieces/reel reel ?330 mm = 10.000 pieces/reel bar63-03w type code cathode marking laser marking 0.8 0.8 0.6 1.7 marking cathode 0.2 2.5 0.25 0.3 1 -0.05 m a +0.1 +0.2 2 1.25 -0.1 +0.05 -0.2 1.7 0.3 0.15 -0.06 +0.1 0 0.05 +0.2 -0.1 a 0.9 +0.2 -0.1 0.15 0.45 0.2 4 8 2.9 1 2 1.35 0.65 cathode marking
2007-04-19 6 BAS3010B... edition 2006-02-01 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2007. all rights reserved. attention please! the information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|
