View LTN133AT17_4767299.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc.no. rev.no page / 32 LTN133AT17-1 1 04-a00-s-100226 approval samsung secret to date : dell : feb. 26. 2010 samsung tft-lcd model no : LTN133AT17 samsung tft-lcd model no : LTN133AT17 samsung electronics co., ltd. approved by : prepared by : lcd application engineering part i the information described in this spec is prelimin ary and can be changed without prior notice. note : extension code [ -1 ] LTN133AT17- 1 surface type [ anti-glare ] www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 2 04-a00-s-100226 approval samsung secret contents revision history general description 1. absolute maximum ratings 1.1 absolute ratings of environment 1.2 electrical absolute ratings 2. optical characteristics 3. electrical characteristics 3.1 tft lcd module 3.2 backlight unit 4. block diagram 4.1 tft lcd module 4.2 led connection and placement 5. input terminal pin assignment 5.1 input signal & power 5.2 edp interface 5.3 timing diagrams of edp for transmitting 5.4 input signals, basic display colors and gray sc ale of each color. 5.5 pixel format 6. interface timing 6.1 timing parameters 6.2 timing diagrams of interface signal 6.3 power on/off sequence 6.4 input video tolerance of vsync and hsync 6.5 falut / status read timing 7. outline dimension 8. packing 9. markings & others 10. general precaution 11. edid - - - - - - - - - - - - - - - - - - - ( 3 ) - - - - - - - - - - - - - - - - - - - ( 4 ) - - - - - - - - - - - - - - - - - - - ( 5 ) - - - - - - - - - - - - - - - - - - - ( 7 ) - - - - - - - - - - - - - - - - - - - ( 10 ) - - - - - - - - - - - - - - - - - - - ( 13 ) - - - - - - - - - - - - - - - - - - - ( 14 ) - - - - - - - - - - - - - - - - - - - ( 19 ) - - - - - - - - - - - - - - - - - - - ( 24 ) -- - - - - - - - - - - - - - - - - - ( 25 ) -- - - - - - - - - - - - - - - - - - ( 26 ) - - - - - - - - - - - - - - - - - - - ( 28 ) - - - - - - - - - - - - - - - - - - - ( 30 ) www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 3 04-a00-s-100226 approval samsung secret revision history revision history nec d-ic ecr all a01 may. 20. 2010 LTN133AT17-1 model spec was issued first. all a00 feb. 26. 2010 summary page revision no. date www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 4 04-a00-s-100226 approval samsung secret general description description LTN133AT17-1 is a color active matrix tft (thin fil m transistor) liquid crystal display (lcd) that uses amorphous silicon tft as switching devices. this model is composed of a tft lcd panel, a driver circuit and a backlight sy stem. the resolution of a 13.3" contains 1366 x 768 pixels and can display up to 262,144 col ors. 6 o'clock direction is the optimum viewing angle. applications ? notebook pc ? if the usage of this product is not for pc applica tion, but for others, please contact sec general information features ? high contrast ratio ? 1366 x 768 pixels resolution (16:9, hd) ? fast response time ? low power consumption ? led blu structure with embeded led driver ? de (data enable) only mode ? edp (display port) interface (1lane @ 2.7ghz) ? on board edid chip ? rohs compliance ? pvc free compliance ? bfr free compliance ? as free compliance anti-glare haze 17%, hardness 3h surface treatment normally white display mode mm 0.2148 (h) x 0.2148 (v) (typ) pixel pitch rgb vertical stripe pixel arrangement 16 : 9 pixel 1366 x 768 number of pixel 262,144 display colors a-si tft active matrix driver element mm 293.42(h) x 164.97(v) ( 13.3 diagonal ) display area note unit specification item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 5 04-a00-s-100226 approval samsung secret 1. absolute maximum ratings 1.1 environmental absolute ratings mechanical information note (1) temperature and relative humidity range are shown in the figure below. 95 % rh max. (40 c ta) maximum wet - bulb temperature at 39 o c or less. (ta > 40 c ) no condensation (2) 2ms, half sine wave, one time for x, y, z. (3) 5 - 500 hz, random vibration, 30min for x, y, z . (4) at testing vibration and shock, the fixture in holding the module to be tested have to be hard and rigid enough so that the module would not be twisted or bent by the fixture. 0 20 40 60 80 100 -40 -20 0 20 40 60 80 5 90 operating range storage range relative humidity ( %rh) temperature ( o c) 350 5.3 183.6 308.1 max. g - - weight (1) mm 5.0 4.7 depth (d) mm 183.1 182.6 vertical (v) mm 307.6 307.1 horizontal (h) module size note unit typ. min. item (3),(4) g 2.41 - vnop vibration (non-operating) (2),(4) g 240 - snop shock ( non-operating ) (1) c 50 0 topr operating temperate (temperature of glass surface) (1) c 60 -20 tstg storage temperate note unit max. min. symbol item ( 40,90 ) ( 50,50.4 ) ( 60,27.7 ) note (1) measurement condition of outline dimensio n . equipment : vernier calipers . push force : 500g ? f (minimum) www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 6 04-a00-s-100226 approval samsung secret 1.2 electrical absolute ratings (1) tft lcd module note (1) within ta (25 2 c ) v dd =3.3v, v ss = gnd = 0v (1) v v dd + 0.3 v dd C 0.3 v dd power supply voltage (1) v v dd + 0.3 v dd C 0.3 v dd logic input voltage note unit max. min. symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 7 04-a00-s-100226 approval samsung secret 2. optical characteristics the following items are measured under stable condi tions. the optical characteristics should be measured in a dark room or equivalent sta te with the methods shown in note (5). measuring equipment : topcon sr-3 * ta = 25 2 c, v dd =3.3v, fv= 60hz, f dclk = 72.14 mhz, i f = 20 ma (1), (5) pr-650 - 0.359 0.329 0.299 w y white color chromaticity ( cie ) - degrees degrees % cd/m 2 msec - unit (6) 1.54 - - l 13 points white variation - - 10 l - - 5 h ver. - - 20 r - - 20 cr 100 l hor. - - 30 l - - 15 h ver. - - 40 r (1), (5) bm-5a - - 40 cr 10 l hor. viewing angle - 45 - 0.343 0.313 0.283 w x 0.145 0.115 0.085 b y 0.185 0.155 0.125 b x blue 0.565 0.535 0.505 g y 0.350 0.320 0.290 g x green 0.380 0.350 0.320 r y 0.620 0.590 0.560 r x red color gamut i l =19ma (1), (4) - 220 200 y l , ave average luminance of white (5 points) (1), (3) 25 16 - t rt_b/w response time at ta ( rising + falling ) (1), (2), (5) - - 300 normal viewing angle = 0 = 0 cr contrast ratio (5 points) note max typ. min. condition symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 8 04-a00-s-100226 approval samsung secret note 3) definition of response time : note 1) definition of viewing angle : viewing angl e range(10 ? c/r) average luminance of white ( y l,ave ) y l33 + y l55 + y l77 + y l37 + y l73 y l,ave = 5 note 4) definition of average luminance of white : measure the luminance of white at 5 points. 6 oclock direction normal line l r h l 12 oclock direction r =90 o l =90 o = 0 o , x x' y' y = 0 o h = 90 o l = 90 o display data black(tft on) white(tft off) white(tft off) optical response 100% 90% 10% 0% t r t f time cr = cr(33) + cr(55) + cr(77) + cr(37) + cr(73) note 2) definition of contrast ratio (cr) : rati o of gray max (gmax) ,gray min (gmin) at 5 points (33, 55, 77, 37, 73) 5 points : 33, 55, 77, 37, 73 at the figur e of note (6). : test point view area (30%) (50%) (70%) (30%) (50%) (70%) 33 55 77 37 73 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 9 04-a00-s-100226 approval samsung secret [ optical characteristics measurement setup ] center of the screen tft-lcd module lcd panel photo-detector ( topcon sr-3 ) 50 cm field = 2 note 5) after stabilizing and leaving the panel a lone at a given temperature for 30 min , the measur ement should be executed. measurement should be executed in a stable, windless,and dark room. 30 min after lighting the backlight. this should be measured in the center of screen. led current : 20 ma environment condition : ta = 25 2 c maximum luminance of 13 points minimum luminance of 13 points note 6) definition of 13 points white variation ( l ), [ 11 ~ 99 ] l = : test point www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 10 04-a00-s-100226 approval samsung secret 3. electrical characteristics 3.1 tft lcd module note (1) display port interface characteristics sh ould be based on vesa standard (edp v1 draft11) (2) f v = 60hz, f dclk = 72.14 mhz, v dd = 3.3v , dc current. (3) power dissipation pattern *a) white pattern *b) mosaic pattern display brightest gray level display darkest gray level view area ta= 25 2 c (1) edp v1(d11) va(rx/tx) edp interface type (2),(3)*c ma 400 380 - black (2),(3)*b ma - 360 - mosaic (2),(3)*a ma - 350 - i dd white current of power supply (4) a 2 - - i rush rush current mhz - 72.14 - f dclk main frequency khz - 47.40 - f h hsync frequency hz - 60 - fv vsync frequency v 3.6 3.3 3.0 v dd voltage of power supply note unit max. typ. min. symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 11 04-a00-s-100226 approval samsung secret 4) rush current measurement condition v dd rising time is 470us 3.3v gnd 0.9v dd 0.1v dd 470us 3.3v 12v v dd ( lcd input) control signal (high to low) m2 2sk1399 m1 2sk1059 r2 1k c2 10000pf c3 1uf r3 47k r1 47k fuse c1 1uf *c) 1dot vertical stripe pattern r g b r g b r g b r g g b r g b r g b r g r g b r g b r g b r g g b r g b r g b r g rr www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 12 04-a00-s-100226 approval samsung secret 3.2 back-light unit if x vf x 36 leds (w/ converter efficiency) w 3.5 - - p power consumption vf x 9 leds v 30.6 28.8 27.0 vp led array voltage v 3.4 3.2 3.0 vf led forward voltage ma - 20 - if led forward current note unit max. typ. min. symbol item ta= 25 2 c 3.3 led driver ta= 25 2 c - led driver manufacturer : max17061 (maxim) note - test equipment : fluke 45 mhz 1.1 - 0.9 f o operating frequency vin=7.5~21v, riset = 211kohm ma 19.9 19 18.1 vin=7.5~21v, riset = 266kohm ma 15.7 15 14.3 vin=7.5~21v, riset = 200kohm ma 20.9 20 19.1 khz 100 - 5 f pwm pwm input frequency p= v in x i w 2.73 2.88 3.00 p input power ma 130 240 400 i input current v 21 12 7.5 v in input voltage vin=7.5~21v, riset = 133kohm ma 31.4 30 28.6 i out output current (each led string) % 100 - 0 d pwmi duty cycle note unit max. typ. min. symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 13 04-a00-s-100226 approval samsung secret 4. block diagram 4.1 tft lcd module 4.2 led connection and placement edp input / mlvds output timing controller 13.3 hd tft-lcd panel source driver ics dc-dc converter gamma generator input connector i-pex 20455-030e-0 or compatible edp vcom generator source pcb mlvds edid eeprom i 2 c bus led power control led b/l control signal vcom led power&signal dvdd avdd von/voff video signal gamma feedback smbus 9 9 9 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 14 04-a00-s-100226 approval samsung secret 5. input terminal pin assignment diag pin for dell testing. pin 1 & 30 must be connect ed diag_loop 30 backlight power vbl 29 backlight power vbl 28 backlight power vbl 27 backlight power vbl 26 backlight control data smbus_data 25 backlight control clk smbus_clk 24 system pwm signal input bl_pwm 23 no connection (reserved) nc 22 bl ground bl_gnd 21 bl ground bl_gnd 20 bl ground bl_gnd 19 bl ground bl_gnd 18 hpd(hot plug detect) signal pin hpd 17 ground gnd 16 ground gnd 15 build-in self test enable bist 14 vcc for lcd module (3.3v) vcc 13 vcc for lcd module (3.3v) vcc 12 high speed ground h-gnd 11 complement signal - auxiliary channel aux- 10 true signal - auxiliary channel aux+ 9 high speed ground h-gnd 8 true signal link - lane 0 lane0_p 7 complement signal link - lane 0 lane0_n 6 high speed ground h_gnd 5 no connection (reserved for 2lane) nc 4 no connection (reserved for 2lane) nc 3 high speed ground h_gnd 2 diag pin for dell testing. pin 1 & 30 must be connect ed diag_loop 1 description symbol pin # 5.1. input signal & power (edp, connector : 20455- 030e-02 by i-pex or equivalent ) www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 15 04-a00-s-100226 approval samsung secret 5.2 edp interface : (compliant to dp spec v1.1a & e dp spec v1.1) lane 0 --------------------------- pix0 be -------- maud7:0 mvid7:0 vb-id bs ----------------------- pix0 be --- first partial-pixels of line n last partial-pixels of line n first partial-pixels of line n+1 18bpp rgb mapping to 1-lane dummy data symbols (may be substituted with audio packet) pixel data symbols b2-5:0|r3-5:4 r2-1:0|g2-5:0 .. b1-3:0|r2-5:2 g1-5:0|b1-5:4 b0-1:0|r1-5:0 g0-3:0|b0-5:2 r0-5:0|g0-5:4 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 16 04-a00-s-100226 approval samsung secret 5.3 timing diagrams of edp for transmission edp receiver : integrated t-con at 2mhz mui - - 1227 - receiver jitter tolerance (hbr) at 10mhz mui - - 548 - at 20mhz mui - - 505 - at 100mhz mui - - 491 - at 2mhz mui - - 1648 - receiver jitter tolerance (hbr) at 10mhz mui - - 778 - at 20mhz mui - - 747 - hbr & rbr mv 1320 - 100 v rx-diffp-p differential peak-to- peak input voltage - v - gnd - vrx-dc-cm rx dc common mode voltage reduced bit rate ps 300 - - l rx-skew- intra_pair high bit rate ps 150 - - l rx-skew- intra_pair lane intra-pair skew note unit max. typ. min. symbol parameter the following requirements are compliant to vesa di splayport standard v1.1a www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 17 04-a00-s-100226 approval samsung secret 5.2 input signals, basic display colors and gray s cale of each color note 1) definition of gray : rn: red gray, gn: green gray, bn: blue gray (n=gray level) note 2)input signal: 0 =low level voltage, 1=high l evel voltage b3 b60 : : : : : : : : : : : : : : : : : : : b2 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 dark b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g61 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : g3 g60 : : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 dark g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of green b63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue b62 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 light b61 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : g63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green g62 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 light r63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red r62 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 light r61 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : : r3 r60 : : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 magenta - 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green - 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic colors b5 45 b3 b2 b1 b0 g5 g4 g3 g2 g1 g0 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display color www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 18 04-a00-s-100226 approval samsung secret 5.3 pixel format in the display r g b r g b pixel 1 r g b r g b r g b r g b r g b r g b LTN133AT17-1 line 1 line 768 pixel 1366 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 19 04-a00-s-100226 approval samsung secret 6. interface timing 6.1 timing parameters 6.2 timing diagrams of interface signal - clocks - 1366 - thd display period horizontal active display term - clocks 1572 1522 1450 th cycle one line scanning time - lines - 768 - tvd display period vertical active display term - lines 800 790 780 tv cycle frame frequency note unit max. typ. min. symbo l item signal t vd t v de t h t c t hd valid display data ( 1366 clocks) dclk de data signals www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 20 04-a00-s-100226 approval samsung secret 6.3 power on/off sequence : the power on/off sequence is described as follows : power on/off sequence, normal system operation t10 t11 t12 t1 0.1 lcd vcc 0.9 lcd vcc 0.1 lcd vcc 0.9 lcd vcc disabled enabled display backlight source main-link data sink aux ch edp display lcd vcc hpd from sink t2 video from source black video black video t3 aux channel operational link training idle idle or off valid video data t5 t6 t8 t9 t7 t4 power on/off sequence, aux channel transaction only t11 t12 t1 0.1 lcd vcc 0.9 lcd vcc 0.1 lcd vcc 0.9 lcd vcc disabled display backlight source main-link data sink aux ch edp display lcd vcc hpd from sink t2 t3 idle or off black video aux channel operational www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 21 04-a00-s-100226 approval samsung secret note 1) the sink must include the ability to genera te black video autonomously. the sink must automati cally enable black video under the following conditions: - upon lcd vcc power-on (within t2 max) - when the novideostream_flag (vb-id bit 3) is rece ived from the source (at the end of t9) - when no main link data, or invalid video data, is received from the source. black video must be displayed within 50ms (max) from the start of eithe r condition. video data can be deemed invalid based on msa and timing information, for example. note 2) the sink may implement the ability to disab le the black video function, as described in notes 1, above, for system development and debugging purpose s. note 3) the sink must support aux channel polling b y the source immediately following lcd vcc power-on without causing damage to the sink device (the sour ce can re-try if the sink is not ready). the sink must be able to respond to an aux channel transacti on with the time specified within t3 max. power sequence timing parameters - 500 source power off time t12 10 source power rail fall time, 90% to 10% t11 500 0 source delay from end of valid video data from source to power off t10 source source sink source source source sink sink source reqd. by - - 0 - - - 0 0 0.5 min limits (ms) source mush assure backlight is no longer illuminated (see note 1 below) - delay from backlight disable to end of valid video data t9 source must assure display video is stable - delay from valid video data from source to backlight t8 max allows sink validate video data and timing 50 delay from valid video data from source to video on display t7 min accounts for required bs-idle pattern. max allows for source frame synchronization - link idle t6 dependant on source link training protocol - link training duration t5 allows for source to read link capability and initialize - delay from hpd high to link training initialization t4 sink aux channel must be operational upon hpd high 200 delay from lcd vcc to hpd high t3 prevents display noise until valid video data is received from source (see note1 below) 200 delay from lcd vcc to black video generation t2 10 power rail rise time, 10% to 90% t1 max notes description timing parameter www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 22 04-a00-s-100226 approval samsung secret note 1) vbl should follow the valid data to preven t blu malfunction for preventing fuse open, ic burn t, no blu led by surge current backlight power sequence timing parameters 10 10 0.5 0.5 min limits (ms) - vbl falling to valid data td - valid data to vbl rising tc 10 vbl falling time tb 10 vbl rising time ta max description # 200 200 20 20 min limits (ms) - blu off to valid data th - valid data to blu on tg - blu off to vbl falling (smbus) tf - vbl rising to blu on (smbus) te max description # 6.4 input video tolerance of vsync and hsync www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 23 04-a00-s-100226 approval samsung secret 6.5 fault / status bit timing t3 note 1) t3 timing is smbus on command to valid sta tus / fault register. (min time delay from b/l on to status register rea d.) - ms 15 - 10 t3 fault / status bit timing note unit max. typ. min. item signal www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 24 04-a00-s-100226 approval samsung secret 7. mechanical outline dimension it will be attached with pdf file www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 25 04-a00-s-100226 approval samsung secret 8. packing 1. carton(internal package) (1) packing form corrugated cardboard box and corrupad form as sho ck absorber (2) packing method note 1) total weight : approximately 12 kg 2) acceptance number of piling : 30 sets 3) carton size : 418(w) x 490(d) x 301(h) packing case cushion bottom cushion top panel www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 26 04-a00-s-100226 approval samsung secret (4) nameplate indication( following example is onl y for reference ) 9. markings & others 1 set carton 4 2 pcs pictorial marking 3 1 set packing case (inner box) included shock absorber 2 30 pcs static electric protective sack 1 quantity part name no a nameplate bearing followed by is affixed to a shi pped product at the specified location on each product. (1) parts number : ltnxxxxxxx-xxx (2) revision : three letters (3) lot number : x x x x xxx xx x note 1). this code indicating year is omitted in th e products of kiheung site. cell position no.(in the one glass) glass no.(in the one lot) lot no.(glass) month year(note 1) product code line product code. customer code. generation tech, information resolution size extension code. parts name : LTN133AT17-1 lot number : xxxxxxxxxx inspected work week : 0901 number (2009 year 1 st week) dp/n : dell part no ( 0xf930 is for LTN133AT17-1) xxx : product revision c ode 40 mm 80 mm LTN133AT17 0901 xxxxxxxxxx 1xx dp / n 0xf930 cn C0xf930 - xxxxx - xxx- xxxx C xxx usp6639589 / usp5280371 13.3 hd made in china (3) packing material www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 27 04-a00-s-100226 approval samsung secret (6) packing small box attach ( following example i s only for reference ) ltnxxxxxxx-xxx 0xxxxx vendor id/loc : 21320/39792 0xxxxx : dell p/n a00, a01, a02, a99 xb (mp) x20, x21, x23, x29 st (cs) x10, x11, x12, x19 pt (es) x00, x01, x02, x09 sst (ws) revision code(s) build name(s) panel revision code scheme (refer to the red box on the label) rev.xxx 20 0xf930 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 28 04-a00-s-100226 approval samsung secret 10. general precautions 1. handling (a) when the module is assembled, it should be atta ched to the system firmly using every mounting holes. be careful not to twist and bend the modules. (b) refrain from strong mechanical shock and / or a ny force to the module. in addition to damage, this may cause improper operation or damag e to the module. (c) note that polarizers are very fragile and could be easily damaged. do not press or scratch the surface harder than a hb pencil lead. (d) wipe off water droplets or oil immediately. i f you leave the droplets for a long time, staining and discoloration may occur. (e) if the surface of the polarizer is dirty, cl ean it using some absorbent cotton or soft cloth. (f) the desirable cleaners are water, ipa (isoprop hyl alcohol) or hexane. do not use ketone type materials(ex. acetone), ethy l alcohol, toluene, ethyl acid or methyl chloride. it might permanent damage to the polarize r due to chemical reaction. (g) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth . in case of contact with hands, legs or clot hes, it must be washed away thoroughly with soap. (h) protect the module from static , it may cause d amage to the c-mos gate array ic. (i) use fingerstalls with soft gloves in order to k eep display clean during the incoming inspection and assembly process. (j) do not disassemble the module. (k) do not pull or fold the lamp wire. (l) do not adjust the variable resistor which is lo cated on the back side. (m) protection film for polarizer on the module s hall be slowly peeled off just before use so that the electrostatic charge can be minimized. (n) pins of i/f connector shall not be touched dir ectly with bare hands. www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 29 04-a00-s-100226 approval samsung secret 2. storage (a) do not leave the module in high temperature, an d high humidity for a long time. it is highly recommended to store the module with t emperature from 0 to 35 c and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunli ght. (c) the module shall be stored in a dark place. it is prohibited to apply sunlight or fluorescent light during the store. 3. operation (a) do not connect,disconnect the module in the power on condition. (b) power supply should always be turned on/off b y following item 6.3 power on/off sequence . (c) module has high frequency circuits. sufficien t suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimize the interference. (d) the standard limited warranty is only applicabl e when the module is used for general notebook applications. if used for purposes other t han as specified, sec is not to be held reliable for the defective operations. it is s trongly recommended to contact sec to find out fitness for a particular purpose. (e) the standard limited warranty is only applicabl e when the module is used for general notebook applications. if used for purposes other t han as specified, sec is not to be held reliable for the defective operations. it is s trongly recommended to contact sec to find out fitness for a particular purpose. 4. others (a) ultra-violet ray filter is necessary for outdoo r operation. (b) avoid condensation of water. it may result in i mproper operation or disconnection of electrode. (c) do not exceed the absolute maximum rating value . ( the supply voltage variation, input voltage variation, variation in part contents and environmental temperature, so on) otherwise the module may be damaged. (d) if the module displays the same pattern continu ously for a long period of time,it can be the situation when the image sticks to the screen. (e) this module has its circuitry pcbs on the rear side and should be handled carefully in order not to be stressed. www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 30 04-a00-s-100226 approval samsung secret 11. edid byte value value (hex) (hex) (binary) 0 header 00 00000000 1 header ff 11111111 2 header ff 11111111 3 header ff 11111111 4 header ff 11111111 5 header ff 11111111 6 header ff 11111111 7 header 00 00000000 8 eisa manufacture code = 3 character id 4c 01001100 9 eisa manufacture code (compressed ascii) a3 10100011 0a panel supplier reserved ? product code 41 01000001 0b panel supplier reserved ? product code 54 01010100 0c lcd module serial no - preferred but optional (? 0? if not used) 00 00000000 0d lcd module serial no - preferred but optional (? 0? if not used) 00 00000000 0e lcd module serial no - preferred but optional (? 0? if not used) 00 00000000 0f lcd module serial no - preferred but optional (? 0? if not used) 00 00000000 10 week of manufacture ff 11111111 11 year of manufacture 14 00010100 12 edid structure version # = 1 01 00000001 13 edid revision # = 4 04 00000100 14 video i/p definition = digital i/p 95 10010101 15 max h image size = (rounded to cm) 1d 00011101 16 max v image size = (rounded to cm) 10 00010000 17 display gamma = (gamma 100)-100 = example: ( 2.2 100 ) ? 100 = 120 78 01111000 18 feature support ( dpm (standby, suspend, active), color type, other feature) 0a 00001010 19 red/green low bit (rxry/gxgy) 20 00100000 1a blue/white low bit (bxby/wxwy) e5 11100101 1b red x rx = 0.xxx 97 10010111 1c red y ry = 0.xxx 59 01011001 1d green x gx = 0.xxx 52 01010010 1e green y gy = 0.xxx 89 10001001 1f blue x bx = 0.xxx 27 00100111 20 blue y by = 0.xxx 1d 00011101 21 white x wx = 0.xxx 50 01010000 22 white y wy = 0.xxx 54 01010100 23 established timings 1 (00h if not used) 00 00000000 24 established timings 2 (00h if not used) 00 00000000 25 manufacturer?s timings (00h if not used) 00 00000000 26 standard timing id1 (01h if not used) 01 00000001 27 standard timing id1 (01h if not used) 01 00000001 28 standard timing id2 (01h if not used) 01 00000001 29 standard timing id2 (01h if not used) 01 00000001 2a standard timing id3 (01h if not used) 01 00000001 2b standard timing id3 (01h if not used) 01 00000001 2c standard timing id4 (01h if not used) 01 00000001 2d standard timing id4 (01h if not used) 01 00000001 2e standard timing id5 (01h if not used) 01 00000001 2f standard timing id5 (01h if not used) 01 00000001 30 standard timing id6 (01h if not used) 01 00000001 31 standard timing id6 (01h if not used) 01 00000001 32 standard timing id7 (01h if not used) 01 00000001 33 standard timing id7 (01h if not used) 01 00000001 34 standard timing id8 (01h if not used) 01 00000001 35 standard timing id8 (01h if not used) 01 00000001 panel color coordinates standard timing id establi shed timings display parameters header field name and comments vendor / product edid version www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 31 04-a00-s-100226 approval samsung secret 36 pixel clock/10,000 (lsb) 2e 00101110 37 pixel clock/10,000 (msb) 1c 00011100 38 horizontal active = xxxx pixels (lower 8 bits) 56 01010110 39 horizontal blanking (thbp) = xxxx pixels (lower 8 bits) 9c 10011100 3a horizontal active/horizontal blanking (thbp) (upper4:4 bits) 50 01010000 3b vertical active = xxxx lines 00 00000000 3c vertical blanking (tvbp) = xxxx lines (de blankin g typ. for de only panels) 16 00010110 3d vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 00110000 3e horizontal sync, offset (thfp) = xxxx pixels 30 00110000 3f horizontal sync, pulse width = xxxx pixels 20 00100000 40 vertical sync, offset (tvfp) = xx lines sync width = xx lines 25 00100101 41 horizontal vertical sync offset/width upper 2 bit s 00 00000000 42 horizontal image size =xxx mm 25 00100101 43 vertical image size = xxx mm a5 10100101 44 horizontal image size / vertical image size 10 00010000 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 46 vertical border = 0 (zero for notebook lcd) 00 00000000 47 bit[7] 0: non-interlace, 1: interlace bit[6:5] 00: normal display, no strero, xx: see tab le xx for definition bit[4:3] 00: analog composite, 01: bipolar analog c omposite, 10: digital composite, 11: digital separate bit[2:1] :the interpretation of bits 2 and 1 is dependent on the decode of bits 4 and 3 - see table 3.18. bit[0] :see table vesa edid spec for definit ion referenced default = 1ah 1a 00011010 48 pixel clock/10,000 (lsb) c9 11001001 49 pixel clock/10,000 (msb) 12 00010010 4a horizontal active = xxxx pixels (lower 8 bits) 56 01010110 4b horizontal blanking (thbp) = xxxx pixels (lower 8 bits) 9c 10011100 4c horizontal active/horizontal blanking (thbp) (upper4:4 bits) 50 01010000 4d vertical active = xxxx lines 00 00000000 4e vertical blanking (tvbp) = xxxx lines (de blankin g typ. for de only panels) 16 00010110 4f vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 00110000 50 horizontal sync, offset (thfp) = xxxx pixels 30 00110000 51 horizontal sync, pulse width = xxxx pixels 20 00100000 52 vertical sync, offset (tvfp) = xx lines sync width = xx lines 25 00100101 53 horizontal vertical sync offset/width upper 2 bit s 00 00000000 54 horizontal image size =xxx mm 25 00100101 55 vertical image size = xxx mm a5 10100101 56 horizontal image size / vertical image size 10 00010000 57 horizontal border = 0 (zero for notebook lcd) 00 00000000 58 vertical border = 0 (zero for notebook lcd) 00 00000000 59 bit[7] 0: non-interlace, 1: interlace bit[6:5] 00: normal display, no strero, xx: see tab le xx for definition bit[4:3] 00: analog composite, 01: bipolar analog c omposite, 10: digital composite, 11: digital separate bit[2:1] :the interpretation of bits 2 and 1 is dependent on the decode of bits 4 and 3 - see table 3.18. bit[0] :see table vesa edid spec for definit ion referenced default = 1ah 1a 00011010 timing descripter #1 timing descripter #2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 32 LTN133AT17-1 32 04-a00-s-100226 approval samsung secret 5a flag 00 00000000 5b flag 00 00000000 5c flag 00 00000000 5d data type tag: alphanumeric data string (ascii) fe 11111110 5e flag 00 00000000 5f dell p/n 1 st character 58 01011000 60 dell p/n 2 nd character 46 01000110 61 dell p/n 3 rd character 39 00111001 62 dell p/n 4 th character 33 00110011 63 dell p/n 5 th character 30 00110000 64 lcd supplier eedid revision # bit[7] : 0=x, 1=a bit[6:0] : 00, 01, 02? for sst 10, 11, 12? for pt 20, 21, 22? for st 00, 01, 02? for x-build (if bit[7]=1 ) 80 10000000 65 manufacturer p/n 31 00110001 66 manufacturer p/n 33 00110011 67 manufacturer p/n 33 00110011 68 manufacturer p/n 41 01000001 69 manufacturer p/n 54 01010100 6a manufacturer p/n 0a 00001010 6b manufacturer p/n (if <13 char, then terminate wit h ascii code 0ah, set remaining char = 20h) 20 00100000 6c flag 00 00000000 6d flag 00 00000000 6e flag 00 00000000 6f data type tag: manufacturer specified data 00 00 00000000 70 flag 00 00000000 71 color management (true color depth, 2-bit frc) 00 00000000 72 panel type & configurations (bulb/led string #, s tructure revision, panel structure) 41 01000001 73 frame rate details (sdrrs, drrs, max frame rate, min frame rate) 01 00000001 74 light controller interface and maximum typical lu minance 16 00010110 75 front surface / polarizer and pixel structure (tr ansflective, ag/glossy) 00 00000000 76 multi-media features (dynamic backlight control, color management) 00 00000000 77 multi-media features (active gamma control, motio n blur) 00 00000000 78 special features #1 (in-cell scanner, wireless) 00 00000000 79 special features #2 (in-cell touch, interface, ov er drive, lvds channel or edp lane) 09 00001001 7a special features #3 (3d, e-privacy, bist support) 01 00000001 7b (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 7c (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 7d (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 7e extension flag (# of optional 128 edid extension blocks to follow, typ = 0) 00 00000000 7f checksum (the 1-byte sum of all 128 bytes in thi s edid block shall = 0) 9d 10011101 checksum timing descripter #4 timing descripter #3 dell specific information www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LTN133AT17

	To Download LTN133AT17 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .