for further information contact your local stmicroelectronics sales office. may 2012 doc id 023046 rev 1 1/3 3 STM8T143-EVAL STM8T143-EVAL evaluation board data brief features main board with an stm8t143am62 microcontroller in an so8 package 5 electrode boards with different ground planes: ? square electrode with no ground plane ? square electrode with 15% ground plane ? square electrode with 100% ground plane ? square electrode with ground ring and plane ? ring electrode with no ground plane proximity or touch or dual output depending on stm8t143 configuration configuration through the one-time programmable option bytes with the programming and data streaming board connected to the st-tslink probe driven by the stvp - st visual programmer software monitoring of the stm8t143 internal capacitive sensing parameters in data streaming mode with the programming and data streaming board connected to the st- tslink probe driven by the stm-studio software power supply via usb or from st-tslink probe 2 leds (depending on option bytes configuration) ? ld1 (red) for proximity/touch detection ? ld2 (green) for proximity detection jumper jp1 (idd) for consumption measurement description the STM8T143-EVAL evaluation board is a complete demonstration and development platform for the stm8t143 touch and proximity capacitive sensors. it includes a main board with an stm8t143am62, a programming and data streaming board and 5 electrode boards with different ground planes. figure 1. STM8T143-EVAL evaluation board www.st.com
STM8T143-EVAL 2/3 doc id 023046 rev 1 revision history table 1. document revision history date revision changes 25-may-2012 1 initial release.
STM8T143-EVAL doc id 023046 rev 1 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
