data sheet ptm fc series pt type distributor (24mm width) the fc series pt type distributor converts a current signal (4 to 20ma dc) from transmitter into a voltage signal (1 to 5v dc) and distributes the voltage signal to each receiver. in addition, this distributor is provided with built-in trans- mitter power suppy. its structure is plug-in style. input specification input signal: 1 point output specification output signal: 1 point power supply power supply: 24v dc (20 to 30v dc) 24v ac, +13%, ?0%, (47 to 63hz) as specified. power consumption: approx. 2w operation condition ambient temperature: 0 to 50 c ambient humidity: less than 90%rh (no condensation) outline dimension (hxwxd): 96 x 26 x 130mm mass: appox. 200g housing: plastic housing (color: black) mounting method: panel mounting or din rail mounting characteristics accuracy: less than 0.1% of full span response time: less than 0.1 sec. (90% response) dielectric strength: 1500v ac, 1 min. reception only: input output - ground non-insulation type: input output power- ground non-insulation with buffer: input output power- ground input type input signal input resistance current 4 to 20ma dc 250 ? output type output signal allowable load resistance voltage 1 to 5v dc 500k ? or over (reception, non-insulation) 15k ? or over (with output buffer) power insulation with buffer: input output - power- ground power i/o insulation with buffer: input - output - power- ground insulation resistance: 500v dc, 100m ? or over reception specified: input output - ground non-insulation type: input output power- ground non-insulation with buffer: input output power- ground power insulation with buffer: input output - power- ground power i/o insulation with buffer: input - output - power- ground ambient temperature effect: less than 0.15% of full span / 10 c power regulation effect: less than 0.1% of full span specifications code symbols t p m 1 2 1 345678 description input signal 4 to 20ma dc output system reception only non-insulation type non-insulation with buffer power insulation with buffer power i/o insulation with buffer power supply none 24v dc 24v dc 24v dc/ 24v ac (50/60hz) 24v dc/ 24v ac (50/60hz) output signal 1 to 5v dc 2 2 v v a b c d e 0 1 1 1 1 date EDS9-25A feb. 20, 1996
ptm outline diagram (unit: mm) external connection diagram functional diagram range of delivery main unit and socket 32 31 output 12 11 22 21 transmitter (4 to 20ma dc) transmitter (4 to 20ma dc) transmitter (4 to 20ma dc) 1. reception only type output 3. power insulation type with buffer 42 41 power supply power circuit output signal insulation circuit 4. power input/output insulation type with buffer 32 12 11 22 21 31 current limiting 42 41 32 31 12 11 22 21 power circuit power supply current limiting transmitter (4 to 20ma dc) output 2. non-insulation type 42 41 32 31 12 11 22 21 power supply current limiting 250 ? 250 ? 250 ? 250 ? 130 100 26 24 294 74 35 terminal screw m4 main unit terminal screw (for transmission) terminal stopper 26 16 2-m4 din rail stopper din rail mounting panel mounting 11 12 21 22 5 6 31 32 41 42 + - output general reception only type + - + - 11 12 21 22 5 6 31 32 41 42 + - + - output power + - + - information in this catalog is subject to change without notice. printed in japan head office gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fesys.co.jp/eng instrumentation div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http://www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.
|
