for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 1 the HMC722LP3E is an and/nand/or/nor fun- ction designed to support data transmission rates of up to 13 gbps, and clock frequencies as high as 13 ghz. the hmc772lp3e may be easily con- fgured to provide any of the following logic functions: and, nand, or and nor. the HMC722LP3E also features an output level control pin, vr, which allows for loss compensation or for signal level optimization. all input signals to the HMC722LP3E are terminated with 50 ohms to ground on-chip, and may be either ac or dc coupled. the differential outputs of the HMC722LP3E may be either ac or dc coupled. outputs can be connected directly to a 50 ohm to ground terminated system, while dc blocking capacitors may be used if the terminating system is 50 ohms to a non-ground dc voltage. the HMC722LP3E operates from a single -3.3v dc supply, and is available in a rohs compliant 3x3 mm smt package. general description HMC722LP3E features functional diagram supports high data rates: up to 13 gbps differential & singe-ended operation fast rise and fall times: 19 / 18 ps low power consumption: 230 mw typ. programmable differential output voltage swing: 600 - 1100 mv propagation delay: 95 ps single supply: -3.3v 16 lead 3x3 mm smt package: 9 mm2 typical applications the HMC722LP3E is ideal for: ? rf ate applications ? broadband test & measurement ? serial data transmission up to 13 gbps ? digital logic systems up to 13 ghz ? nrz-to-rz conversion electrical specifcations, t a = +25 c, vee = -3.3v parameter conditions min. typ. max units power supply voltage -3.6 -3.3 -3.0 v power supply current 70 ma maximum data rate 13 gbps maximum clock rate 13 ghz input high voltage -0.5 0.5 v input low voltage -1.0 0.0 v input return loss frequency <13 ghz 10 db output amplitude single-ended, peak-to-peak 550 mvp-p differential, peak-to-peak 1100 mvp-p output high voltage -10 mv 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage v00.0210
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 2 electrical specifcations, (continued) HMC722LP3E v00.0210 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage parameter conditions min. typ. max units output low voltage -570 mv output rise / fall time differential, 20% - 80% 19 / 18 ps output return loss frequency <13 ghz 10 db small signal gain 27 db random jitter jr rms 0.2 ps rms deterministic jitter, jd peak-to-peak, 2 15 -1 prbs input [1] 2 ps, pp propagation delay, td 95 ps [1] deterministic jitter calculated by simultaneously measuring the jitter of a 300 mv, 13 ghz, 2 15 -1 prbs input, and a single-ended output [1] vr = 0.0v [2] frequency = 13 ghz [3] frequency = 10 ghz dc current vs. supply voltage [1] [2] output differential vs. supply voltage [1] [3] output differential vs. vr [2] output differential vs. frequency [3] 55 60 65 70 75 80 85 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9 +25c +85c -40c dc current (ma) supply voltage (v) 400 500 600 700 800 900 1000 1100 1200 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 +25c +85c -40c vr (v) differential voltage (mv) 800 850 900 950 1000 1050 1100 1150 1200 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9 +25c +85c -40c differential voltage (mv) supply voltage (v) 600 700 800 900 1000 1100 1200 1300 2 4 6 8 10 12 14 16 output differential (mv) input frequency (ghz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 3 HMC722LP3E v00.0210 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage [1] vr = 0.0v [2] frequency = 13 ghz [3] frequency = 10 ghz input return loss vs. frequency output return loss vs. frequency rise / fall time vs. vr [3] rise / fall time vs. supply voltage [3] -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 return loss (db) frequency (ghz) -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 return loss (db) frequency (ghz) 15 17 19 21 23 25 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 tr tf rise/fall time (ps) vr (v) 15 17 19 21 23 25 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9 tr tf rise/fall time (ps) supply voltage (v)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 4 HMC722LP3E v00.0210 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage eye diagram timing diagram truth table input outputs a b d l l l l h l h l l h h h notes: a = ap - an b = bp - bn d = dp - dn h - positive voltage level l - negative voltage level [1] test conditions: pattern generated with an agilent n4903a serial bert. eye diagram presented on a tektronix csa 8000. device input = 10 gbps pn code, vin = 300mvp-p differential.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 5 absolute maximum ratings electrostatic sensitive device observe handling precautions power supply voltage (vee) -3.75v to +0.5v input signals -2v to +0.5v output signals -1.5v to +1v storage temperature -65c to +150c operating temperature -40c to +85c HMC722LP3E v00.0210 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. part number package body material lead finish msl rating package marking [3] HMC722LP3E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] 722 xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx package information
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 6 HMC722LP3E v00.0210 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage pin descriptions pin number function description interface schematic 1, 4, 5, 8, 9, 12 gnd signal grounds 2, 3 an, ap clock / data input a 6, 7 bn, bp clock / data input b 10, 11 dp, dn clock / data output 13, 16 gnd supply ground 14 vr output level control. output level may be adjusted by either applying a voltage to vr per output differential vs. vr plot. 15, package base vee negative supply
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 7 evaluation pcb HMC722LP3E v00.0210 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage list of materials for evaluation pcb 118777 [1] item description j1 - j6 pcb mount sma rf connectors j7 - j9 dc pin c1, c2 100 pf capacitor, 0402 pkg. c3, c4 4.7 f capacitor, tantalum r1 10 ohm resistor, 0603 pkg. u1 HMC722LP3E high speed logic, and / nand / or / nor pcb [2] 118775 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 or arlon 25fr item description j1 an j2 ap j3 bn j4 bp j5 dp j6 dn j7 vee j8 vr j9 gnd the circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package gro- und leads should be connected directly to the ground plane similar to that shown. the exposed package base should be connected to vee. a suffi - cient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 8 HMC722LP3E v00.0210 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage application circuit
|
