View T370HW02-V1_4263922.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? c o p y ri g h t a u o p t r o n ics , i n c. s e p , 2 0 06 al l ri g h ts r ese r v e d . t3 70 h w 0 2 v 1 1 / 3 1 n o r e p r o du cti o n a n d re d istr i bu t i on a l l o w e d p r od u c t d es c r i p ti on : t 37 0h w 0 2_ v 1 t f t - l c d p a n e l a u o mo de l n a me : t 37 0 hw 02 _v 1 c u s to me r pa rt no / p roje ct na me : c u s to me r s i g n a t u r e da te a u o da t e pd f created w i th f i nepr i nt pdf f actory pro tr i a l vers i on www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 2/30 no reproduction and redistribution allowed update date: 2007/05/14 product specifications 37 hdtv color tft-lcd module model name: t370hw02. v1 () preliminary specifications (*) final specifications pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 3/30 no reproduction and redistribution allowed contents no contents record of revisions 1 general description 2 absolute maximum ratings 4 electrical charactreistics 4-1 tft-lcd module 4-2 backlight unit 4-3 lvds data format 5 input terminal pin assignment 5-1 tft-lcd module 5-2 inverter unit 5-3 lvds data format 5-4 color data input assignment 6 interface timing characteristics 7 optical characteristics 8 mechanical characteristics 9 reliablity 10 international standards 10-1 safety 10-2 emc 11 packing 11-1 label definition 11-2 packing methods & specifications 12 precautions appendix a pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 4/30 no reproduction and redistribution allowed record of revision version date no old description new description remark 0.1 2006.07.1 1 1 lvds order high (3.3v)= jetda low (gnd) or open =ns lvds order low (gnd) or open =ns high (3.3v)= jetda page.12 0.2 2006.07.1 1 2 common input voltage: 1.0v/ 1.2v/1.5v common input voltage: 1.1v/ 1.25v/1.4v page.6 0.3 2006.07.1 1 3 storage temperature: -20~9 0 o c storage temperature: -20 ~65 o c page.5 0.4 2006.08.2 3 4 max of the t1 in lvds signal = 1000 us max of the t1 in lvds signal = 5000 us page 16 pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 5/30 no reproduction and redistribution allowed 1. general description this specification applies to the 37.0 inch color tft-lcd module t370hw02 v1. this lcd module has a tft active matrix type liquid crystal panel 1920x1080 pixels, and diagonal size of 37.0 inch. this module supports 1920x1080 hdtv mode (non-interlace). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. the t370hw02 v1 has been designed to apply the 8-bit 2 channel lvds interface method. it is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. . * general information items specification unit note active screen size 37.01 inch display area 819.36 (h) x 460.89(v) mm outline dimension 877(h) x 514.6(v) x 54.7(d) mm with inverter driver element a-si tft active matrix display colors 8 bit, 16.7m colors number of pixels 1920 x 1080 pixel pixel pitch 0.42675(h) x 0.42675(w) mm pixel arrangement rgb vertical stripe display operation mode transmissive, normally black surface treatment hard-coating (3h), anti-glare pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 6/30 no reproduction and redistribution allowed 2. absolute maximum ratings the following are maximum values that, if exceeded, may cause permanent damage to the device. item symbol min max unit note logic/lcd drive voltage vcc -0.3 14 [volt] [1] input voltage of signal vin -0.3 4 [volt] [1] blu input voltage vddb -0.3 27 [volt] [1] blu brightness control voltage vblon -0.3 7.0 [volt] [1] operating temperature top 0 50 [ o c] [2] operating humidity hop 10 90 [%rh] [2] storage temperature tst -20 65 [ o c] [2] storage humidity hst 10 90 [%rh] [2] note 1: duration = 50msec note 2 : maximum wet-bulb should be 39 and no condensation. note 3: temperature and relative humidity range is shown below a. humidity 90%rh max (ta 40 o c) b. wet-bulb temperature 39 .(ta > 40 o c) c. no condensation pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 7/30 no reproduction and redistribution allowed 3. block diagram pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 8/30 no reproduction and redistribution allowed 4. electrical characteristics the t370hw02 v1 requires two power inputs. 1.1 st input power : for tft-lcd module driving. 2.2 nd input power : for the blu driving, (powered inverter) 4-1 tft-lcd module (ta=25 2 o c) values parameter symbol min typ max unit notes power supply input voltage vcc 10.8 12.0 13.2 vdc power supply input current icc 1 1.2 a [1] power consumption pc - 12 14.4 watt [1] inrush current i rush - 4 apeak [2] differential input high threshold voltage v th 100 mv [3] differential input low threshold voltage v tl -100 mv [3] lvds interface common input voltage v icm 1.1 1.25 1.4 v input high threshold voltage v ih (high) 2.4 3.3 vdc cmos interface input low threshold voltage v il (low) 0 0.9 vdc note: 1. testing condition is shown in table and figure below for electrical characteristic measurement: symbol value units note input voltage vcc 12 volt vertical frequency v f 60 hz frequency of clock f clk 65 mhz inrush current i rush 4 a time period with rush current t 470 us shown in fig.1 common input voltage v icm v test pattern level level l255 2. environment condition for electrical characteristic measurement:: temperature and relative humidity range is shown below: a. humidity 90%rh max (ta 40 o c) b. wet-bulb temperature 39 .(ta > 40 o c) c. no condensation t rush = 470 s 100% 90% 10% gnd figure 1: measurement of i rush pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 9/30 no reproduction and redistribution allowed 3. measurement of lvds differential voltage is shown in figure 2. vth vcim vtl 0v figure 2 : lvds differential voltage pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 10/30 no reproduction and redistribution allowed 4-2 backlight unit (ta=25 2 o c) value parameter symbol min typ. max units note lamp consumption power p l 145 160 life time l l 50000 60000 note: 1. do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to conducting tape, tft-lcd module have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and conducting tape. 2. the performance of the lamp in lcm, for example lifetime or brightness, is extremely influenced by the characteristics of the dc-ac inverter. so all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. when you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) never occurs. when you confirm it, the lcd assembly should be operated in the same condition as installed in your instrument. pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 11/30 no reproduction and redistribution allowed 4-3 inverter interface characteristics spec item symbol condition min typical max unit note input voltage v ddb 21.6 24 26.4 vdc input current i ddb vddb=24v - 6.04 6.62 adc 1 input power p ddb vddb=24v - 145 159 w 1 inrush current i rush vddb=24v - - 8.5 adc 2 output frequency f bl vddb=24v 42 - khz on 2 - 3.3 on/off control voltage v blon off vddb=24v 0 - 0.8 vdc max 2 - 3.3 vdc dimming control voltage v dim min vddb=24v 0 0.8 vdc dimming frequent f d vddb=24v 140 240 hz max vddb=24v - 3.3 - vdc pwm control voltage v_epwm min vddb=24v - 0 - external pwm control current i_epwm vddb=24v 2 madc external pwm duty ratio d_epwm vddb=24v 30 100 % external pwm frequency f_epwm vddb=24v 140 180 240 hz note 1: vdim= 3.3v; epwm = open/high (turn on for 45minutes) note 2: duration = 20 ms; pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 12/31 no reproduction and redistribution allowed 5. input terminal pin assignment 5-1 tft-lcd module - lcd connector (cn3): jae fi-re51s-hf mating connector: no signal no signal 1 gnd 27 gnd 2 reserved. 28 re0- 3 reserved. 29 re0+ 4 reserved. 30 re1- 5 reserved. 31 re1+ 6 reserved. 32 re2- 7 lvds sel 33 re2+ 8 reserved. 34 gnd 9 reserved. 35 reclkin- 10 reserved. 36 reclkin+ 11 gnd 37 gnd 12 ro0- 38 re3- 13 ro0+ 39 re3+ 14 ro1- 40 n.c. 15 ro1+ 41 n.c. 16 ro2- 42 gnd 17 ro2+ 43 gnd 18 gnd 44 gnd 19 roclkin- 45 gnd 20 roclkin+ 46 gnd 21 gnd 47 n.c. 22 ro3- 48 vlcd(12v) 23 ro3+ 49 vlcd(12v) 24 n.c. 50 vlcd(12v) 25 n.c. 51 vlcd(12v) 26 gnd note: 1. all gnd (ground) pins should be connected together and should also be connected to the lcd s metal frame. all vcc (power input) pins should be connected together. 2. nc only C pull high or low is not allowed pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 13/30 no reproduction and redistribution allowed 5-2 inverter units connector is shown below: cn1 : s14b-ph-sm3-tb(jst) no signal name feature 1 v bl +24v 2 v bl +24v 3 v bl +24v 4 v bl +24v 5 v bl +24v 6 gnd gnd 7 gnd gnd 8 gnd gnd 9 gnd gnd 10 gnd gnd 11 vdim brightness control signal input (0v : min ~ 3.3 v :max ) 12 bl on/off 3.3v : on, 0v : off 13 e-pwm dim external pwm dimming control 14 sel pin high(2~5v) : internal pwm (pin 11) low(0~0.8) : external pwm (pin13) cn2 : s10b-ph-sm3-tb(jst) no signal name feature 1 v bl +24v 2 v bl +24v 3 v bl +24v 4 v bl +24v 5 v bl +24v 6 gnd gnd 7 gnd gnd 8 gnd gnd 9 gnd gnd 10 gnd gnd pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 14/30 no reproduction and redistribution allowed 5-3 lvds data format lvds option = l (gnd) or open = ns b4 na de de b4 b5 b6 b7 na b5 r2 r7 g2 g2 r2 r3 r4 r5 r6 r3 g3 b2 b3 b3 g3 g4 g5 g6 g4 previous cycle current cycle next cycle clock rin0+ rin0- rin1+ rin1- rin2+ rin2- r0 b1 na na r0 r1 g0 g1 b0 r1 rin3+ rin3- g7 lvds option = h (3.3v) jetda b2 na de de b2 b3 b4 b5 na r0 r5 g0 g0 r0 r1 r2 r3 r4 r1 g1 b0 b1 b1 g1 g2 g3 g4 g5 g2 previous cycle current cycle next cycle clock rin0+ rin0- rin1+ rin1- rin2+ rin2- r6 b7 na na r6 r7 g6 g7 b6 r7 rin3+ rin3- b3 pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 15/30 no reproduction and redistribution allowed 5-4 color input data assignment the brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ------- blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 blue blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 16/30 no reproduction and redistribution allowed 6. interface timing 6-1 input signal timing specifications: this is the signal timing required at the input of the user connector. all of the interface signal timing should be satisfied with the following specifications for it s proper operation. timing table (de only mode) a. frame rate = 60 hz b. frame rate = 50 hz 1.) di splay position is specific by the rise of de signal only. horizontal display position is specified by the falling edge of 1 st dclk right after the rise of enab, is displayed on the left edge of the screen. vertical display position is specified by the rise of de after a low level period equivalent to eight times of horizontal period. the 1 st data corresponding to one horizontal line after the rise the of enab is displayed at the top line of screen. 3.) if a period of deb high is less than 1920 dclk or less than 1080 lines, the rest of the screen displays black. 4.) the display position does not fit to the screen if a period of de high and the effective data period do not synchronize with each other. pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 17/31 no reproduction and redistribution allowed signal timing waveforms t h t d i s p ( v ) t b l k ( v ) t v d e r g b d a t a n l i n e i n v a l i d d a t a i n v a l i d d a t a 1 l i n e 2 l i n e 3 l i n e n l i n e 4 l i n e t c l k c l k d e r g b d a t a ( o d d ) r g b d a t a ( e v e n ) p i x e l m - 7 p i x e l m - 5 p i x e l m - 3 p i x e l m - 1 p i x e l m - 6 p i x e l m - 4 p i x e l m - 2 p i x e l m i n v a l i d d a t a i n v a l i d d a t a p i x e l 1 p i x e l 2 p i x e l 3 p i x e l 5 p i x e l 4 p i x e l 6 p i x e l 7 p i x e l 8 p i x e l 9 p i x e l 1 0 p i x e l 1 1 p i x e l 1 2 p i x e l m - 5 p i x e l m - 3 p i x e l m - 1 p i x e l m - 4 p i x e l m - 2 p i x e l m i n v a l i d d a t a i n v a l i d d a t a p i x e l 1 p i x e l 2 p i x e l 3 p i x e l 4 t h t d i s p ( h ) t b l k ( h ) pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 18/31 no reproduction and redistribution allowed 6-2 power sequence of lcd module (on/off) 10% 90% 90% 10% t1t2 t3t4 t5t6t7 lamp on valid data power supply for lcd signal backlight values parameter min. typ. max. units min. t1 470 - 5000 us t2 20 - 35 ms t3 500 - - ms t4 200 - - ms t5 5 - - ms t6 - - 30 ms t7 1 - - s note: user should follow the power on/off sequence and the rising/falling time to avoid miss operation of the panel. pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 19/30 no reproduction and redistribution allowed 6-3 power sequence of inverter values parameter min. typ. max. units t1 20 - - ms t2 500 - - ms t3 250 - - ms t4 0 - - ms t5 1 - - ms t6 - - 10 ms pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 20/31 no reproduction and redistribution allowed 7. optical specification 7-1 warm-up procedure & testing methods & testing condition warm-up procedure: stable for 45 minutes in dark environment at 25 o c. measurement tools: bm7 or equivalent testing method: specified distance is 50cm from lcd surface at a viewing angle of and q is 0 o . (measurement equipment is shown in fig.1) testing condition: parameter value parameter value vddb 24v frequency (f v ) 60hz iddb 5a temperature ta=25 2 o c fig.1 measurement equipment 7-2 optical specification (ta=25 2 o c) value units notes parameter symbol condition min. typ. max. contrast ratio cr 1200 1500 1 surface luminance, white lwh 400 500 cd/ O 2 luminance variation white 9 pts 1.3 cd/ O 3 rise time tr r (8) ms 4 decay time tr d (15) ms response time gray to gray t (6) ms r x 0.640 red r y 0.330 g x 0.29 green g y 0.600 b x 0.150 blue b y 0.060 w x 0.280 color coordinates (cie 1931) white w y =0 o , q =0 o viewing normal angle typ -0.03 0.290 typ +0.03 x axis, right r ( =0 ) 88 5 x axis, left l ( =180 ) 88 y axis, up u ( =90 ) 88 viewing angle y axis, down d ( =0 ) cr 3 20 88 degree pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 21/30 no reproduction and redistribution allowed 1 2 3 4 5 6 7 8 t y h v h/ 6 h/2 v/2 v/6 note : 1. contrast ratio will be measured in the center of panel (point 5 in figure 2), contrast ratio (cr) is defined mathematically as: ) 0 l ( lum ) 255 l ( lum ) ratio contrast ( r / c = lum(l255):luminance measured at the center point of panel when all pixels is white. lum(l0) : luminance measured at the center point of panel when all pixels is black. 2. surface luminance is defined as luminance value measured at point 5 with pre-described measurement methods and measurement condition. 3. luminance variation, white, is defined as: white (9p) = maximum(l on1 , l on2 , ,l on9 )/ minimum(l on1 , l on2 , l on9 ) position of each 9 pts for measuring is shown in fig 2. 4. response time is the time required for the display to transition from black to white (rise time, tr r ) and from white to black (decay time, tr d ), that is shown in fig3. 5. detailed measurement method of viewing angle is shown in fig4. fig. 2 luminance measurement positions tr r l0,15,l31, .l255 l0,15,l31, .l255 p h o t o d e t e c t o r o u t p u t time l0,15,l31, .l255 note: the response time is defined as the following figure and shall be measured by switching the input signal for any level of gray(bright) and any level of gray(dark) fig.3 measurement of response time any level of gray(dark) any level of gray (bright) any level of gray (bright) pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 22/30 no reproduction and redistribution allowed fig.4 measurement of viewing angle pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 23/31 no reproduction and redistribution allowed 8. mechanical characteristics the contents provide general mechanical characteristics for the model t370hw02 v1. detailed mechanical drawings are shown in the following pages. horizontal 877.0 mm vertical 514.6mm outline dimension depth 54.7 mm(with inverter) horizontal 827.8 mm bezel opening vertical 469.4 mm horizontal 819.36 mm active display area vertical 460.89 mm weight 11000g (typ.) pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 24/31 no reproduction and redistribution allowed mechanical figure: pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 25/31 no reproduction and redistribution allowed 9. reliability environment test condition: no test item condition 1 high temperature storage test ta=60 240h 2 low temperature storage test ta= -20 240h 3 high temperature operation test ta=50 80%rh 240h 4 low temperature operation test ta=0 240h 5 vibration test (non-operating) wave form: random vibration level: 1.5g rms bandwidth: 10-500hz, duration: x, y, z 20min one time each direction 6 shock test (non-operating) shock level: 50g waveform: half since wave, 11ms direction: x, y, z one time each direction 7 vibration test (with carton) wave form: random vibration level: 1.5g rms bandwidth: 10-500hz, duration: x, y, z 30min one time each direction 8 drop test (with carton) height: 31cm 1 corner, 3 edges, 6 surfaces (astmd4169-i) pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 26/31 no reproduction and redistribution allowed 10. international standard 10-1 safety (1) ul1950 third edition, underwriters laboratories, inc. jan. 28, 1995 standard for safety of information technology equipment including electrical business equipment. (2) can/csa c22.2 no. 950-95/60950 third edition, canadian standards association, standard for safety of information technology equipment including electrical business equipment. (3) en60950: 1992+a2: 1993+a2: 1993+c3: 1995+a4: 1997+a11: 1997 iec 950: 1991+a1: 1992+a2: 1993+c3: 1995+a4:1996 european committee for electrotechnical standardization (cenelec) european standard for safety of information technology equipment including electrical business equipment. 10-2 emc a) ansi c63.4 methods of measurement of radio-noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r limits and methods of measurement of radio interface characteristics of information technology equipment. international special committee on radio interference. c) en 55022 limits and methods of measurement of radio interface characteristics of information technology equipment. european committee for electrotechnical standardization. (cenelec), 1998 pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 27/30 no reproduction and redistribution allowed 11. packing 11-1 definition of label: a. panel label: green mark description for pb free product, auo wil add for identification. for rohs compatible products, auo will add for identification. note: the green mark will be present only when the green documents have been ready by auo internal green team. (the definition of green design follows the auo green design checklist.) b. carton label: 370hw02 v1 t370hw02 v1 97.37t04.1xx pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 28/30 no reproduction and redistribution allowed 11-2 packing methods: packing specification: specification item qty. dimension weight (kg) packing remark 1 packing box 3 pcs/box 985(l)mm*280(w)mm*692(h)mm 34 2 pallet 1 1130(l)mm*980(w)mm*123(h)mm 10 3 boxes per pallet 8 boxes/pallet (by air) ; 12 boxes/pallet (by sea) 4 panels per pallet 24pcs/pallet(by air) ; 36 boxes/pallet (by sea) pallet after packing 24 (by air) 36(by sea) 1130(l)mm*980(w)mm*150.4(h)mm (by air) 1130(l)mm*980(w)mm*219.6(h)m (by sea) 282 (by air) 418 (by sea) pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 29/30 no reproduction and redistribution allowed 12. precautions please pay attention to the followings when you use this tft lcd module. 12-1 mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizer. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 12-2 operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage: v= 200mv(over and under shoot voltage) (2) response time depends on the temperature. (in lower temperature, it becomes longer..) (3) brightness of ccfl depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time (required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimize the interface. pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
copyright au optronics, inc. sep, 2006 all rights reserved. t370hw02 v1 30/30 no reproduction and redistribution allowed 12-3 electrostatic discharge control since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wristband etc. and don t touch interface pin directly. 12-4 precautions for strong light exposure strong light exposure causes degradation of polarizer and color filter. 12-5 storage when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 12-6 handling precautions for protection film (1) the protection film is attached to the bezel with a small masking tape. when the protection film is peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of flue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue remains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. pdf created with fineprint pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of T370HW02-V1

	To Download T370HW02-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .