ftr-k1 series (a) series name ftr-k : ftr-k series (b) contact arrangement a : form a (spst-no) c : form c (spdt) (c) coil type / enclosure k : standard (400 mw) (d) nominal voltage 005 : 5 vdc, 006 : 6vdc, 009 : 9vdc 02 : 2vdc 0 8 : 8 vdc 022 :022vdc 024 : 24vdc, 028 : 28vdc 048 : 48vdc (e) contact material / tv type w : silver tin oxide ( form c) t : silver tin oxide / tv-5 rated (form a tv-5) (f) special designation ht : 05oc n features l low profle (height: 15.7mm) l high isolation insulation distance (between coil and contacts): 10mm min. dielectric strength: 5kv surge strength: 10kv l low coil power (400mw) l cadmium free contacts l safety standards ul, csa, vde, semko approved ul, csa tv-5 rating approved ( form a type) l rohs compliant since production l ul f class isolation l vde glow-wire ignitablility test 775 (iec60335-1) approved actual marking does not carry the type name : "ftr" e.g.: ordering code: ftr-k1ck012w actual marking: k1ck012w power relay 1 pole - 16a 105oc ftr-k1 series n ordering information ftr-k c k 005 w C ht [example] (a) (b) (c) (d) (e) (f ) rohs compliant
2 ftr-k1 series n part numbers ordering part number series contact coil power coil voltage contact material ftr-k ak005t-ht ftr-k a: form a k: 400 mw 5 t: silver tin oxide ftr-k ak006t-ht 6 ftr-k ak009t-ht 9 ftr-kak0 2t-ht 2 ftr-kak0 8t-ht 8 ftr-k ak022t-ht 22 ftr-k ak024t-ht 24 ftr-k ak028t-ht 28 ftr-k ak048t-ht k: 430 mw 48 ftr-k ck005w-ht c: form c k: 400 mw 5 w: silver tin oxide ftr-k ck006w-ht 6 ftr-k ck009w-ht 9 ftr-kck0 2w-ht 2 ftr-kck0 8w-ht 8 ftr-k ck022w-ht 22 ftr-k ck024w-ht 24 ftr-k ck028w-ht 28 ftr-k ck048w-ht k: 430 mw 48 400mw type n coil data chart coil voltage nominal voltage (vdc) max. coil voltage* coil resistance (0%) must operate voltage* 2 must release voltage* 2 nominal power (mw) 005 5 12.2 vdc 62 ? 3.5 vdc 0.5 vdc 400 006 6 14.7 vdc 90 ? 4.2 vdc 0.6 vdc 009 9 22.0 vdc 202 ? 6.3 vdc 0.9 vdc 02 2 29.4 vdc 360 ? 8.4 vdc 1.2 vdc 08 8 44.1 vdc 810 ? 12.6 vdc 1.8 vdc 022 22 53.9 vdc 1,210 ? 15.4 vdc 2.2 vdc 024 24 58.8 vdc 1,440 ? 16.8 vdc 2.4 vdc 028 28 68.6 vdc 1,960 ? 19.6 vdc 2.8 vdc 048 48 117.6 vdc 5,360 ? 33.6 vdc 4.8 vdc 430 note: all values in the table are measured at 20c. *1: no contact current at 20c *2: specifed values are subject to pulse wave voltage
3 ftr-k1 series n specifications item ftr-k ak ( ) t-ht standard ftr-k ck ( )w-ht standard contact arrangement form a from c material silver tin oxide confguration single resistance (initial) maximum 100 m? at 1 a, 6 vdc rating 6 a, 250 vac / 24 vdc maximum carrying current* 6 a maximum inrush current 80a (20ms) 250vac maximum switching rating 4,000 va / 384w maximum switching voltage 440 vac / 300vdc maximum switching load*2 0 ma 5 vdc coil nominal power (at 20oc) 400mw (at 430mw 48v coil) operate power (at 20oc) 200 mw (20mw at 48v coil) operating temperature -40oc to +05oc (no frost) time value operate (without diode) maximum 5ms (at nominal voltage, no bounce) release (without diode) maximum 5ms (at nominal voltage, no bounce) life mechanical 20 x 0 6 operations minimum electrical ac contact rating 00 x 0 3 operations min. 50 x 0 3 operations min. dc contact rating 00 x 0 3 operations min. 30 x 10 3 operations min. other vibration resistance misoperation 10 to 55 hz, at double amplitude of 0.7 mm endurance 10-55hz, at double amplitude of 1.5 mm shock resistance misoperation min. 100m/s 2 ( ms) endurance min. 1,000m/s 2 (6ms) weight approximately 13g * need to consider the head from pcb when max. current is more than 10a. * 2 minimum switching loads mentioned above are reference values. please perform the confrmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
4 ftr-k1 series type compliance contact rating ftr-kck ( ) w-ht ftr-kak ( ) t-ht ul ul 508 e63614 flammability: ul 94-v0 (plastics) 16a, 277 vac (resistive) 105oc 6a, 24 vdc (resistive) 05oc 1 hp, 277vac 105oc /2 hp, 25vac 05oc /8 hp, 25vac 05oc pilot duty: b300 105oc 6a, 24 vdc (resistive) 05oc 16a, 277 vac (resistive) 105oc 1 hp, 277vac 105oc /2 hp, 25vac 05oc tv-5, 20vac 25,000 cycles 05oc pilot duty: a300 105oc csa c22.2 no. 14 lr 40304 vde 0435, 0631, 0700, 0860 6a, 24vdc (resistive) 16a, 277 vac (resistive) 20a 277vac (resistive) 1 hp, 277vac /2 hp, 25vac /8 hp, 25vac pilot duty: b300 6a, 24vdc (resistive) 16a, 277 vac (resistive) 20a 277vac (resistive) 1 hp, 277vac /2 hp, 25vac tv-5, 20vac 25,000 cycles pilot duty: a300 semko en 6058-:992 and a en 61095:1993 and a+a 250vac, 16 (3)a 40t85 5a/80a 250vac 40t85 n safety standards n insulation item ftr-k note resistance (initial) minimum 1,000 m? 1 min. at 500 vdc dielectric strength open contacts 1,000 vac (50/60 hz) 1 min. coil and contacts 5,000 vac (50/60 hz) 1 min. surge voltage (coil and contact) 0,000 v 1.2 x 50s standard wave clearance/creepage 0 mm / 0 mm insulation (din en61810-1 vde0435) voltage pollution isolation material group 250 v 3 iiia isolation category / reference voltage (vde0 0b) c / 250 v complies with nemko, demko, fimko
5 ftr-k1 series n characteristic data 0 0.2 0.4 0.6 0.8 1.2 0 0 20 30 40 50 60 70 80 90 00 0a 6a 0a coil te mperature rise coil power (w) t emperature rise (deg.) 0 1 2 3 4 5 6 7 8 9 0 0 0 20 30 40 50 60 70 80 90 00 ftr-kck02w n=200 ti me (ms) distribution (%) distribution of operation & release ti me operate release 0 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 0 0 20 30 40 50 60 70 80 90 00 ftr-kck02w n=200 nominal v oltage multiplying factor distribution (%) distribution of operation & release v oltage operate release dc resistive ac resistive 50 20 0 5 2 0.5 0.2 0.1 000 500 200 00 50 20 0 ftr-k contact v oltage (v ) switching current (a ) maximum switching power 0 2 4 6 8 0 2 4 6 8 20 0 50 00 200 500 000 000 250v ac resistive 24vdc resistive 250v ac cos=0. 7 dc24v =7ms ac250v cos=0. 4 dc24v =15ms 20 30 300 ftr-kak contact current load (a) service life (0 3 operations) life curve 0 2 4 6 8 0 2 4 6 8 20 0 50 00 200 500 000 000 250v ac resistiv e 24vdc resistiv e 250v av cos=0. 7 24vdc =7ms 250v ac cos=0. 4 24vdc =15ms 20 30 300 ftr-kck contact current load (a) service life (0 3 operations) life curve 0 2 0 4 0 6 0 8 0 00 0.5 1.5 2 2.5 6a ftr-k 0a must operate voltage (hot coil) must operate voltage (cool coil) ambient temperature (oc) nominal voltage multiplying facto r operating range 0 0 2 0 3 0 4 0 5 0 0 0 20 30 40 50 60 70 80 90 00 ftr-kck02w n=200 contact resistance (m?) distribution (% ) distribution of contact resistance make break
6 ftr-k1 series n dimensions 7.5 5 5 20 (2.6) (2.6 ) 0.1 2-1 -0 6-1.3 8 7 6 5 4 3 2 no no co m co m orientation mark 7.5 5 20 (2.6) (2.6 ) 0.1 2-? 4-?1.3 2.6 12.7 +0.3 7.5 0.9 0.9 15.7 +0.3 29 +0.3 5 5 20 (2.6) 0.5 0.3 0.5 0.45 3.3 2 3 4 5 6 7 8 no no com com nc nc orientation mark 2.6 12.7 +0.3 7.5 0.9 0.9 15.7 +0.3 29 +0.3 5 20 (2.6) 0.5 0.3 0.45 3.3 l dimensions ftr-kak ( ) t-ht l schematics (bottom view) l pc board mounting hole layout (bottom view) unit: mm l schematics (bottom view) l pc board mounting hole layout (bottom view) ftr-kck ( ) w-ht l dimensions
7 ftr-k1 series 1. general information l relays produced after the specifc date code that is indicated on each data sheet are lead-free now. all of our signal and power relays are lead-free. please refer to lead-free status info. (http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf) l lead free solder paste currently used in relays is sn-3.0ag-0.5cu. l all signal and power relays also comply with rohs. please refer to individual data sheets. relays that are rohs compliant do not contain the 5 hazardous materials that are restricted by rohs directive (lead, mercury, chromium iv, pbb, pbde). l it has been verifed that using lead-free relays in leaded assembly process will not cause any problems (compatible). l lf is marked on each outer and inner carton. (no marking on individual relays). l to avoid leaded relays (for lead-free sample, etc.) please consult with area sales offce. l we will ship leaded relays as long as the leaded relay inventory exists. note: cadmium was exempted from rohs on october 21, 2005. (amendment to directive 2002/95/ec) 2. recommended lead free solder profle l recommended solder paste sn-3.0ag-0.5cu. rohs compliance and lead free relay information refow solder condition 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical realys. 4. tin whisker l dipped snagcu solder is known as low risk tin whisker. no considerable length whisker was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condition: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c soler bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec.
8 ftr-k1 series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 4, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://www.fujitsu.com/us/services/edevices/components/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 8529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2008 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. january 28, 2008.
|
