medium intensity - tinted encapsulation led -bcr -bca -bcg color red amb grn viewing angle 35 35 24 v/c table [3] i i i iv [2] (mcd) 120 100 80 pk (nm) 635 583 565 high intensity - waterclear encapsulation led -nwr -nwo -nwa -nwg -nwb -nww [7] -nkr -nko -nka -nkg -nkb -nkw [7] color red org amb grn blu wht red org amb grn blu wht viewing angle 30 30 30 45 45 50 15 15 15 15 15 20 v/c table [3] i i i ii ii ii i i i ii ii ii iv [2] (mcd) 5300 2000 5300 2400 700 1560 6900 8000 6900 10000 3000 5600 pk (nm) 634 605 592 520 465 [9] 634 605 592 520 465 [9] .312" mount panel lights 50 series 445 s. douglas street, el segundo, ca 90245-4630 ? (800) 421-6815 ? (310) 640-0442 ? fax (310) 640-7639 www.datadisplay.com ? 2003 data display products 58 - mounting hardware provided - for detailed led data, see discrete section, model 200 data display products ? model wires 51 w 53 [1] (optional) 54 56 561 564 to order, follow the example: voltage [4] 2 5h 12h 15h 24h 28h 48h 60h 120 [5] lens diffusion -c clear -n diffused bezel color 0 black 9 white lens lens bezel model led voltage diffusion color color 54 -alp 2 -c a 9 1 3 4 lens color r red a amber y yellow g green 5 6 b blue w water clear -s smoke [8] 1234 5 6 select one bold component from each numbered category in the tables below. part number 54-alp2-ca9 ? [1] model 53 is available with clear (-c) lens only. [2] iv = typical luminous intensity @ if = 20ma (ta =25c). iv is measured without lenses. for low power leds, if = 2ma. [3] see voltage/current table for design specifications. design current for low power leds = 2ma. [4] ta = 25c. voltage 2 indicates external resistor required. voltages 5h through 60h are vdc. for ac operation, insert d after voltage (e.g. 24hd), d indicates built-in rectifier; not required for 15h or less, or 120vac. dc operation not available for 120v. bi-color and tri-color not available in ac voltages. [5] select high intensity leds only. [6] omit h when selecting a voltage (e.g. 51-rlp12-cwo). [7] select -cw or -nw lens only. -rag wire leads: green anode/black cathode/red anode. -gar wire leads: green cathode/black anode/red cathode. common lead is the first lead clockwise from reference mark on header. tri-color 5 or 12 volt, omit h in part number. [8] omit lens diffusion when selecting smoked lens (e.g. 51-nwa12h-so). [9] white is identified by one of four cie coordinates x:0.290/y:0.260, x:0.290/y:0.305, x:0.330/y:0:365,x:0.330/y:0.320 voltage/current design max vf/if vf/if v/c table ii 5v/15ma 6v/26ma 12v/15ma 14v/20ma 15v/15ma 16.5v/18ma 24v/15ma 26v/18ma 28v/15ma 30v/17ma 48v/9.5ma 50v/10ma 60v/7ma 65v/8ma 120vac/3.5ma 130vac/4ma voltage/current design max vf/if vf/if v/c table i 5v/27ma 5.5v/40ma 12v/27ma 14v/35ma 15v/24ma 16.5v/28ma 24v/17ma 26v/20ma 28v/16.5ma 30v/18ma 48v/15ma 50v/16ma 60v/9ma 65v/10ma 120vac/3.5ma 130vac/4ma specialty leds led -rlp [6] -alp [6] -glp [6] -lrg [7] -rag [7] -gar [7] color red amb grn red/grn red/amb/grn grn/amb/red viewing angle 50 50 50 60 60 50 v/c table [3] [3] [3] [3] i i i description low power low power low power bi-color. red cathode tri-color, common cathode tri-color, common anode 2 iv [2] (mcd) 2.3 2.1 2.3 90/40 6/6/6 5/5/5 pk (nm) 635 583 565 660/565 630/565 635/565
445 s. douglas street, el segundo, ca 90245-4630 ? (800) 421-6815 ? (310) 640-0442 ? fax (310) 640-7639 www.datadisplay.com ? 2003 data display products 59 .312" mount panel lights 50 series data display products ? 51 53 54 (flush lens) 56 561 564 tc5 & nw5 mounting hardware standard wire leads: 6.0" total length(nominal)/.50" stripped (nominal), red anode/black cathode, 24 awg tpb ul1061 insulation. contact factory for other lengths, gauges and colors. all dimensions are in inches (mm) tolerances: .xx"(.x) .025"(.63) / .xxx"(.xx).010"(.25) specifications are subject to change without notice.
|
