mba/sma 0204 vg06, mbb/sma 0207 vg06, mbe/sma 0414 vg06 vishay beyschlag www.vishay.com for technical questions, contact: filmresistors.leaded@vishay.com document number: 28768 60 revision: 10-mar-08 leaded resistors with established reliability (cecc 40101-806, version e) mba/sma 0204 vg06, mbb/sma 0207 vg06 and mbe/sma 0414 vg06 leaded thin film resistors with established reliability are the perfect choice for all high-reliability applications typically found in the fields of military, aircraft and spacecraft electronics. these versions supplement the families of professional and precision leaded resistor s mba/sma 0204, mbb/sma 0207 and mbe/sma 0414. features ? approved according to cecc 40101-806, version e ? established reliability, failure rate level e7 ? advanced thin film technology ? excellent overall stability: class 0.5 ? lead (pb)-free solder contacts ? pure tin plating provides compatibility with lead (pb)-free and lead containing soldering processes ? compatible with ?restriction of the use of hazardous substances? (rohs) directive 2002/95/ec (issue 2004) applications ? military ? avionics ? space note: ? the failure rate level e7 corresponds to mil level r. metric size din: 0204 0207 0414 cecc: ab d technical specifications description mba/sma 0204 mbb/sma 0207 mbe/sma 0414 cecc size, style a b d resistance range 1 to 5.11 m 1 to 10 m 1 to 21.5 m resistance tolerance 1 %; 0.1 % temperature coefficient 50 ppm/k; 15 ppm/k climatic category (lct/uct/days) 55/155/56 55/155/56 55/155/56 rated dissipation, p 70 0.4 w 0.6 w 1.0 w operating voltage, u max. ac/dc 200 v 350 v 500 v film temperature 155 c155 c 155 c max. resistance change at p 70 for resistance range, r / r after: 1 to 332 k 1 to 1 m 1 to 2.43 m 1000 h 0.5 % 0.4 % 8000 h 1.0 % 0.8 % specified lifetime 8000 h permissible voltage against ambient (insulation): 1 min; u ins 300 v 500 v 800 v continuous 75 v 75 v 75 v failure rate level e7 failure rate 0.7 10 - 9 /h 0.3 10 - 9 /h 0.1 10 - 9 /h
mba/sma 0204 vg06, mbb/sma 0207 vg06, mbe/sma 0414 vg06 leaded resistors with es tablished reliability (cecc 40101-806, version e) vishay beyschlag document number: 28768 for technical question s, contact: filmresistors.leaded@vishay.com www.vishay.com revision: 10-mar-08 61 note: (1) please refer to table packaging for complete information. ? the part number shown above is to facilitate the unified part numbering system for ordering products. part number and product description part number: mbb0207cc1001fct00 model/size special character tcr/material value tolerance packaging (1) special mba0204 = mba/sma 0204 mbb0207 = mbb/sma 0207 mbe0414 = mbe/sma 0414 c = vg06 (cecc e7) e = 15 ppm c = 50 ppm z = jumper 3 digit value 1 digit multiplier multiplier 8 = *10 - 2 9 = *10 - 1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 5 = *10 5 6 = *10 6 0000 = jumper b = 0.1 % f = 1.0 % z = jumper ct c1 00 = standard product description: mbb/sma 0207-50 1 % vg06 ct 1k0 mbb/sma 0207 - 50 1 % vg06 ct 1k0 model/size tcr tolerance vg06 = cecc e7 packaging (1) resistance value mba/sma 0204 mbb/sma 0207 mbe/sma 0414 15 ppm 50 ppm 0.1 % 1.0 % ct c1 1k0 = 1 k 51r1 = 51.1 en 140101-806 ordering information example of the ordering information for a resistor: mba/sma 0204-50 1 % vg06 287k cecc40101-806ezac287kfe7 example of the ordering information for jumpers: mba/sma 0204 vg06 0r0 cecc40101-806eza-0r00-e7 the elements used in this ordering in formation have the following meaning: cecc40101-806 ez a c 287k f e7 cecc detail specification number assessment level style (see table technical specifications) temperature coefficient (c = 50 ppm/k; e = 15 ppm/k) resistance value according to en 60062, 4 characters tolerance on rated resistance (b = 0.1 %; f = 1 %) failure rate level according to en 60115-1, table zb.1 packaging table model box pieces code mba/sma 0204 1000 5000 c1 ct mbb/sma 0207 1000 5000 c1 ct mbe/sma 0414 1000 c1 07cc 001 1 0 c0 0 b mb 2 f t
mba/sma 0204 vg06, mbb/sma 0207 vg06, mbe/sma 0414 vg06 vishay beyschlag leaded resistors with established reliability (cecc 40101-806, version e) www.vishay.com for technical questions, contact: filmresistors.leaded@vishay.com document number: 28768 62 revision: 10-mar-08 dimensions note: ? color code marking is applied according to en 60062 in five bands (e96 or e192 series). each color band appears as a single so lid line, voids are permissible if at least 2/3 of the band is visible from each radial angle of view. the last color band for tolerance is app roximately 50 % wider than the other bands. an interrupted violet band between the 1st an d 2nd full band indicates the failure rate level e7. an inte rrupted orange band between the 4th and 5th full band indicates t he temperature coefficient of 15 ppm/k. description production is strictly controlle d and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal alloy is deposited on a high grade ceramic body (85 % al 2 o 3 ) and conditioned to achieve the desired temperature coefficient. nickel plated steel termination caps are firmly pressed on the metallised rods. a special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. the resistor elements are covered by a light blue protective coating designed for electrical, mechanical and climatic protecti on. four or five color code rings designate the resistance value and tolerance in accordance with en 60062. the result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. only a ccepted products are stuck directly on the adhesive tapes in accordance with en 60286-1 . assembly the resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. excellent solderability is proven, even after extended storage. they are suitable for automatic soldering using wave or dipping. the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. the resistors are completely lead (pb)-free, the pure tin plating provides co mpatibility with lead (pb)-free and lead-containing soldering processes. the immunity of the plating against tin whisker growth has been proven under extensive testing. all products comply with the cefic-eeca-eicta list of legal restrictions on hazardous substances. this includes full compliance with the following european rohs directives: ? 2000/53/ec end of vehicle life directive (elv) ? 2000/53/ec annex ii to end of vehicle life directive (elv ii) ? 2002/95/ec restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) solderability is specified for 2 years after production or re-qualification. the permitted storage time is 20 years. dimensions - leaded resistor types, mass and relevant physical dimensions type d max. (mm) l max. (mm) d nom. (mm) i min. (mm) m min. (mm) mass (mg) mba/sma 0204 1.6 3.6 0.5 29.0 5.0 125 mbb/sma 0207 2.5 6.3 0.6 28.0 10.0 220 mbe/sma 0414 4.0 11.9 0.8 31.0 15.0 700 l d d i i m
mba/sma 0204 vg06, mbb/sma 0207 vg06, mbe/sma 0414 vg06 leaded resistors with es tablished reliability (cecc 40101-806, version e) vishay beyschlag document number: 28768 for technical question s, contact: filmresistors.leaded@vishay.com www.vishay.com revision: 10-mar-08 63 approvals the resistors are tested in accordance with cecc 40101-806 which refers to en 60115-1 and en 140400 and the variety of environmental test procedures of the iec/en 60068 series. approval of conformity is indicated by the cecc logo on the package label. vishay beyschlag has achieved ?approval of manufacturer? in accordance with en 100114-1 . the release certificate for ?technology approval schedule? in accordance with cecc 240 001 based on en 100114-6 is granted for the vishay beyschl ag manufacturing process. specials this product family of thin film leaded resistors with established reliability is complemented by zero ohm jumpers . functional performance further information on the performance of these products may be found in the following datasheets: ? ?professional leaded resistors? document no. 28766 ? ?precision leaded resistors? document no. 28767 note: (1) resistance values to be selected for 1 % toleranc e from e96 only and for 0.1 % tolerance from e192 only 12nc information resistance decade ordering example (for historical coding reference of mba 0204 vg06/mbb 0207 vg06/mbe 0414 vg06) the part number of a mba 0204 vg06 resistor, value 287k and tcr 50 with 1 % tolerance, supplied on bandolier in a box of 5000 units is: 2312 905 02874. temperature coefficient and resistance range description resistance value (1) tcr tolerance mba/sma 0204 mbb/sma 0207 mbe/sma 0414 50 ppm/k 1 % 1 to 5.11 m 1 to 10 m 1 to 21.5 m 15 ppm/k 0.1 % 100 to 221 k 100 to 499 k 100 to 470 k jumper - 10 m ; i max. = 3 a 10 m ; i max. = 5 a - resistance decade last digit 1 to 9.99 8 10 to 99.9 9 100 to 999 1 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1m to 9.99 m 5 10 m to 99.9 m 6 12nc code for historical coding refere nce of mba 0204 vg06/mb b 0207 vg06/mbe 0414 vg06 description part number 2312 ... ..... bandolier in box type tcr tol. c1 1000 units ct 5000 units mba 0204 vg06 50 ppm/k 1 % 900 0.... 905 0.... 15 ppm/k 0.1 % 902 0.... 907 0.... jumper - 902 90001 907 90001 mbb 0207 vg06 50 ppm/k 1 % 910 0.... 915 0.... 15 ppm/k 0.1 % 912 0.... 917 0.... jumper - 912 90001 917 90001 mbe 0414 vg06 50 ppm/k 1 % 920 0.... - 15 ppm/k 0.1 % 922 0....
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
