do not scale from this print molc-1xx-xx-xx-q-xx no of positions -05 thru -50 lead style (see table 1) -01: through hole -11: through hole -31: through hole -61: through hole plating specifications -s: selective, 30 au / 50 ni min on contact, matte tin tail -sm: selective, 30 au / 50 ni min on contact, matte tin tail -l: light selective, 15 au / 50 ni min on contact, matte tin tail option -lc: locking clip use 2 lc-05-tm (see figure 2, note 3) body specification -q: four row (see table 1) .018 0.46 dia ref xx eq spaces @ .0500[1.27] .006[.15] .014 x .0100[2.54] ref 0.36 "b" ref 2 max sway ( typ ) molc-xx-x terminal (see table 1) .320 ref 8.13 .250 6.35 ref .120 ref 3.05 .050 ref 1.26 + .100[2.54] ref (no of positions x .050[1.27]) + .030[.76] ref (no of positions x .050[1.27]) - .050[1.27] (no of positions x .050[1.27]) "a" "a" c l .102 ref 2.59 .1635 ref 4.15 "a" ref "d" .150[3.18] .003 3 eq spaces @ .0500[1.27] = 2 max toe ( ytp ) .007[.18] .005[.13] c l c l section "a"-"a" (no of pos x .050[1.27]) + .065[1.651] .010 ref 0.25 fig. 2 .060 1.52 .0560 1.42 lc-05-tm 2 req'd same as fig. 1 unless otherwise shown fig 1 ak "c" in-process c1 c c2 c3 c4 ak aj ak sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: through hole .050 x .050 by: molc-1xx-xx-xx-q-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t whelan 05/23/05 2 1 sheet scale: 2:1 insulator: vectra e130, lcp, ul 94 vo color: black terminal: phos bronze, ca540 1/2 hard f:\dwg\misc\mktg\molc-1xx-xx-xx-q-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force: .5 lbs. 3. due to the high amount of insertion force needed, the Clc option is not compatible with auto placement. samtec recommends manual placement for all assemblies with the Clc option. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision ak
molc-1xx-01-xx-q-x molc-1xx-11(61)-xx-q-x packaging views ( ref sheet 1, table 1) pt-1-24-06-15 pt-1-24-15-29 molc-1xx-31-xx-q-x pt-1-24-01-40 sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: through hole .050 x .050 by: molc-1xx-xx-xx-q-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t whelan 05/23/05 2 2 sheet scale: 2:1 insulator: vectra e130, color: black contact or terminal: revision ak f:\dwg\misc\mktg\molc-1xx-xx-xx-q-xx-mkt.slddrw max flash allowed: .002[.05] max gate vestige: .002[.05] 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
