the fastest mil-dtl-3 8999 series iii filter connector the deutsch evomax range is the next evolution of the mil-dtl-38999 series iii filter connector. deutsch have reviewed 20 years of experience in working on customer-specific applications to identify all the bespoke product features that have been utilised. we have then categorised these and produced a standardised connector design that can accommodate all of the key options. by undertaking much of the design work upfront, and producing generic assembly tooling and jigs, we are able to pass a number of benefits onto the customer. features & benefits reduced leadtime lower unit cost no tooling/nre charges (subject to specific filter requirements) faster service on quotation, envelope drawing, product specification and capabilities. all of this is achieved without compromising flexibility in terms of filter configuration and performance.
shell 'a' sq 'b' sq 'c' sq 'd' 'e' 'f' max 'g' dia 'h' dia(min) 'h' dia(min) 'j' sq 'k' dia max pcb tail solder bucket size max rear mounting front mounting ?.50mm ?.80mm (?.020) (?.031) 24.10 18.26 15.09 5.49 3.25 2.50 3.25 16.66 15.88 16.70 15.67 (0.949) (0.719) (0.594) (0.216) (0.128) (0.098) (0.128) (0.656) (0.625) (0.657) (0.617) 26.50 20.62 18.26 4.93 3.25 2.50 3.25 20.22 15.88 19.40 15.67 (1.043) (0.812) (0.719) (0.194) (0.128) (0.098) (0.128) (0.796) (0.625) (0.764) (0.617) 28.90 23.01 20.62 4.93 3.25 2.50 3.25 23.42 19.05 21.80 18.85 (1.138) (0.906) (0.812) (0.194) (0.128) (0.098) (0.128) (0.922) (0.750) (0.858) (0.742) 31.30 24.61 23.01 4.93 3.25 2.50 3.25 26.59 23.01 23.80 22.22 (1.232) (0.969) (0.906) (0.194) (0.128) (0.098) (0.128) (1.047) (0.906) (0.937) (0.875) 32.60 26.97 24.61 4.93 3.25 2.50 3.25 30.96 25.81 25.80 25.45 (1.283) (1.062) (0.969) (0.194) (0.128) (0.098) (0.128) (1.219) (1.016) (1.016) (1.002) 36.80 29.36 26.97 4.93 3.25 2.50 3.25 32.94 28.98 28.20 28.57 (1.449) (1.156) (1.062) (0.194) (0.128) (0.098) (0.128) (1.297) (1.141) (1.110) (1.125) 40.00 31.75 29.36 4.93 3.25 3.20 3.25 36.92 32.16 30.60 31.75 (1.575) (1.250) (1.156) (0.194) (0.128) (0.126) (0.128) (1.454) (1.266) (1.205) (1.250) 43.20 34.93 31.75 6.15 3.91 3.20 3.91 39.29 34.93 33.30 34.72 (1.701) (1.375) (1.250) (0.242) (0.154) (0.126) (0.154) (1.547) (1.375) (1.311) (1.367) 46.30 38.10 34.93 6.15 3.91 3.20 3.91 42.47 37.69 36.50 37.50 (1.823) (1.500) (1.375) (0.242) (0.154) (0.126) (0.154) (1.672) (1.484) (1.437) (1.476) square flange with mounting slots square flange with clinch nuts and rear flange with helicoils shell 'a' sq 'b' sq 'c' sq 'd' 'e' 'f' max 'g' dia 'h' dia (min) 'j' sq 'k' dia max 'l' sq 'm' 'n' rad 'p' dia 'r' pcb tail size max rear mounting ?.50mm (?.020) 24.10 18.26 15.09 5.49 3.25 2.50 3.25 16.66 16.70 15.67 14.00 8.00 9.00 12.39 15.50 (0.949) (0.719) (0.594) (0.216) (0.128) (0.098) (0.128) (0.656) (0.657) (0.617) (0.551) (0.315) (0.354) (0.488) (0.610) 26.50 20.62 18.26 4.93 3.25 2.50 3.25 20.22 19.40 15.67 14.00 8.00 9.00 12.39 15.50 (1.043) (0.812) (0.719) (0.194) (0.128) (0.098) (0.128) (0.796) (0.764) (0.617) (0.551) (0.315) (0.354) (0.488) (0.610) 28.90 23.01 20.62 4.93 3.25 2.50 3.25 23.42 21.80 18.85 17.00 8.00 12.00 15.47 18.65 (1.138) (0.906) (0.812) (0.194) (0.128) (0.098) (0.128) (0.922) (0.858) (0.742) (0.669) (0.315) (0.472) (0.609) (0.734) 31.30 24.61 23.01 4.93 3.25 2.50 3.25 26.59 23.80 22.22 19.00 12.00 18.00 18.77 22.00 (1.232) (0.969) (0.906) (0.194) (0.128) (0.098) (0.128) (1.047) (0.937) (0.875) (0.748) (0.472) (0.709) (0.739) (0.866) 32.60 26.97 24.61 4.93 3.25 2.50 3.25 30.96 25.80 25.45 22.00 12.00 20.00 21.94 25.25 (1.283) (1.062) (0.969) (0.194) (0.128) (0.098) (0.128) (1.219) (1.016) (1.002) (0.866) (0.472) (0.787) (0.864) (0.994) 36.80 29.36 26.97 4.93 3.25 2.50 3.25 32.94 28.20 28.57 25.00 16.00 22.00 24.48 28.40 (1.449) (1.156) (1.062) (0.194) (0.128) (0.098) (0.128) (1.297) (1.110) (1.125) (0.984) (0.630) (0.866) (0.964) (1.118) 40.00 31.75 29.36 4.93 3.25 3.20 3.25 36.92 30.60 31.75 27.00 16.00 22.00 27.63 31.55 (1.575) (1.250) (1.156) (0.194) (0.128) (0.126) (0.128) (1.454) (1.205) (1.250) (1.063) (0.630) (0.866) (1.088) (1.242) 43.20 34.93 31.75 6.15 3.91 3.20 3.91 39.29 33.30 34.72 29.00 16.00 22.00 30.81 34.50 (1.701) (1.375) (1.250) (0.242) (0.154) (0.126) (0.154) (1.547) (1.311) (1.367) (1.142) (0.630) (0.866) (1.213) (1.358) 46.30 38.10 34.93 6.15 3.91 3.20 3.91 42.47 36.50 37.50 31.00 16.00 24.00 33.88 37.30 (1.823) (1.500) (1.375) (0.242) (0.154) (0.126) (0.154) (1.672) (1.437) (1.476) (1.220) (0.630) (0.945) (1.334) (1.469) 09 11 13 15 17 19 21 23 25 09 11 13 15 17 19 21 23 25 2.50 (0.098) 3.18 (0.125) or 5.0 (0.197) 3.20 (0.126) 2.50 (0.098) 3.18 (0.125) or 5.0 (0.197)
evo 19-35 p n **** deutsch filter connector series evo - evomax product designator shell size and insert arrangement see list of insert arrangements on product configurator sheet contact type p - pin s - socket polarisation n, a, b, c, d, e specific mod number assigned by deutsch ltd to define filter values, and all other connector details jam nut shell 'a' a/f 'b' a/f 'b' dia 'd' 'e' 'f' dia pcb tail solder size max max max +0.00 +0.25 max ?.50mm bucket -0.25 (+0.010) ( 0.020) ?.80mm (-0.010) -0.00 ( 0.031) 27.20 24.00 30.40 17.02 17.78 15.67 (1.071) (0.945) (1.197) (0.670) (0.700) (0.617) 32.00 27.00 35.10 19.59 20.96 15.67 (1.260) (1.063) (1.382) (0.771) (0.825) (0.617) 35.10 32.00 38.30 24.26 25.65 18.85 (1.382) (1.260) (1.508) (0.955) (1.010) (0.742) 38.30 36.00 41.50 27.56 28.83 22.22 (1.508) (1.417) (1.634) (1.085) (1.135) (0.875) 41.50 37.00 44.70 30.73 32.01 25.45 (1.634) (1.457) (1.760) (1.210) (1.260) (1.002) 46.20 41.00 49.40 33.91 35.18 28.57 (1.819) (1.614) (1.945) (1.335) (1.385) (1.125) 49.40 46.00 52.60 37.08 38.35 31.75 (1.945) (1.811) (2.071) (1.460) (1.510) (1.250) 52.60 50.00 55.80 40.26 41.53 34.72 (2.071) (1.969) (2.197) (1.585) (1.635) (1.367) 55.80 51.23 58.90 43.43 44.70 37.50 (2.197) (2.017) (2.319) (1.710) (1.760) (1.476) 09 11 13 15 17 19 21 23 25 2.50 (0.098) 3.18 (0.125) or 5.0 (0.197) 3.20 (0.126) contact size solder bucket i/d (min) pcb tail dia max 22 0.90 (0.035) 0.56 (0.022) 20 1.06 (0.042) 0.81 (0.032) 16 1.75 (0.069) 1.02 (0.040) solder bucket i/d dimensions are in mm (inches) rear termination dimensions evomax part numbers
product specifications the evomax connector generally meets the requirements of mil-dtl-38999 series iii. however, some deviations from this standard are necessary due to the inclusion of filtering and other specific requirements, which are defined below: base connector specification: square flange style connectors: mil-dtl-38999/20 jam nut style connectors: mil-dtl-38999/24 insulation resistance: 5g ? minimum at 200vdc capacitor dielectric material: x7r or equivalent capacitor tolerance: ?5% filtering / electrical footprint: as detailed on product configuration sheet contact type: non-removable contacts ground path resistance to shell: 15m ? typ operating temperature range: -55? to +125? other deviations from the mil spec are as defined by configuration sheet and drawing. connectors are supplied in protective packaging. please advise us of any special requirements. every evomax connector is released from deutsch against the following documentation: product envelope drawing ?a generic envelope drawing will be supplied with the quotation for each connector. configuration sheet ?the completed configuration sheet defines the specific requirements of the connector and is the controlling document. ddp (declaration of design and performance) ?a comprehensive ddp will be supplied with the quotation for each connector. this details the environmental performance levels that are applicable to the evomax . castleham industrial estate 4 stanier road, st leonards on sea east sussex tn38 9rf england telephone +44(0) 1424 852721 fax +44(0) 1424 851726 email filters@deutsch.co.uk www.deutschltd.com/filters b9099 japan jupitor corporation jupitor building 3-17-4 minami aoyama minato-ku tokyo 107-0062 japan tel +81 (0) 3 3403 1315 fax +81 (0) 3 3403 1319 email t _ asano@jupitor.jp germany compagnie deutsch gmbh frauhoferstrasse 11b d-82152 munchen tel +49 89 8991570 fax +49 89 89915769 email info@compagnie-deutsch.de france compagnie deutsch service tour albert 1 65 avenue de colmar 92507 rueil malmaison cedex, france tel +33 155472561 fax +33 147083538 email cds@compagnie-deutsch.com usa deutsch eis 250 eddie jones way oceanside ca 92054 tel/fax (513) 722 2108 email rickgdeutsch@aol.com uk deutsch ltd castleham industrial estate 4 stanier road, st leonards on sea east sussex tn38 9rf england tel +44(0) 1424 852721 fax +44(0) 1424 851726 email filters@deutsch.co.uk www.deutschltd.com/filters deutsch worldwide filters representatives contact your local representative for sales and further information: italy deutsch italia 9 piazzale lugano 20158 milano italia tel +39 0239 322 240 fax +39 0237 617 44 email info@deutsch-italia.it
|
