a-88 apem www.apem.com 1500 series t oggle switches - insulated lever and bushing distinctive features and specifications a ? ul and vde (en 61058-1) approved ? v ariety of actuator styles and colours materials ?case : polyamide ?actuator : polyamide ?bushing : polyamide ?contacts : silver electrical specifications ?max. current/voltage rating with resistive load : 6a 250vac (10.000 cycles) 10a 125vac (6.000 cycles) 5a 12vdc (10.000 cycles) ?initial contact resistance : 10 m ? max. ?insulation resistance : 1.000m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals and between terminals and metal panel general specifications ?torque : 0,95 nm (.700 ft.lb) max. applied to nut ?panel thickness : 4,5 mm (.177) between 2 nuts ?operating temperature : -20? to +55? agency approvals a vailability : all models marking : to order switches marked ul and/or vde, complete appropriate box of ordering format. en 61058-1 dimensions : first dimensions are in mm while inches are shown as bracketted numbers. sealing boots are available to protect the switches against dust and water. they are presented in section h. mounting accessories : standard hardware supplied with all models : 1 hex nut u166 and 1 knurled nut u411. standard and special hardware available are presented in section i. packaging unit : 50 pieces per type and colour. about this series
apem www.apem.com a-89 1500 series t oggle switches - insulated lever and bushing solder lug or quick-connect terminals a quick-connect terminals 4,7 x 0,8 (.185 x .031) solder lug terminals model structure iii iii 1531a2 on - off 1536a2 on - on 1539a2 on off on iii iii 1531a8 on - off 1536a8 on - on 1539a8 on off on ? 2 and 3 maintained positions ?silver contacts standard ?single pole configurations ? keyway ? keyway ? keyway p anel cut - out 12.00x0.75 si (.472diax0.75 is) (.275) 7.00 (.472) 6.00 (.236dia) 15.00 7.00 18.80 30? 12.00 (.59) (.74) (.275) 9.50 10.50 (.413) (.374) (.204) 5.20 iii ii i (.472diax0.75 is) 12.00x0.75 si 30 (.472) 15.00 (.59) (.275) 7.00 7.00 18.80 (.74) (.275) 6.00 (.236dia) 12.00 (.275) (.374) (.413) 10.50 9.50 7.00 ii i iii (.20) (.066) (.48dia) 1.70 12.20 5.10 (.377) 12.50 (.492dia) (.137dia) 3.50 9.60 12.20 (.48dia) (.185x.031) (.275) 4.70x0.80 7.00 (.11x.031) (.204) (.122) (.051) 1.30 2.80x0.80 3.10 5.20
a-90 apem www.apem.com 1500 series t oggle switches - insulated lever and bushing a actuators polyamide black l12 red l16 white l17 orange l19 brass, nickel plated l1n polyamide black l22 red l26 white l27 orange l29 polyamide black l32 red l36 white l37 orange l39 polyamide black l42 red l46 white l47 orange l49 standard flat dual cone cylindrical agency approvals ul vde a vailability : all models. marking : to order switches marked ul and/or vde, complete above box with desired approvals.
|
