spec no: dsaj9264 rev no: v.3 date: sep/24/2010 page: 1 of 5 approved: wynec checked: allen liu drawn: c.h.han erp: 1202002383 subminiature solid state lamp attention observe precautions for handling electrostatic discharge sensitive devices part number: KM2520ZGC-E03 green features z subminiature package. z gull wing lead. z long life - solid state reliability. z low package profile. z moisture sensitivity level : level 3. z package : 1000pcs / reel. z rohs compliant. description the green source color devices are made with ingan light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 5. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsaj9264 rev no: v.3 date: sep/24/2010 page: 2 of 5 approved: wynec checked: allen liu drawn: c.h.han erp: 1202002383 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 KM2520ZGC-E03 green (ingan) water clear 3500 4500 20 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength green 520 nm i f =20ma d [1] dominant wavelength green 525 nm i f =20ma ? 1/2 spectral line half-width green 35 nm i f =20ma c capacitance green 100 pf v f =0v;f=1mhz v f [2] forward voltage green 3.2 4 v i f =20ma i r reverse current green 50 ua v r =5v parameter green units power dissipation 120 mw dc forward current 30 ma peak forward current [1] 100 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsaj9264 rev no: v.3 date: sep/24/2010 page: 3 of 5 approved: wynec checked: allen liu drawn: c.h.han erp: 1202002383 green KM2520ZGC-E03
spec no: dsaj9264 rev no: v.3 date: sep/24/2010 page: 4 of 5 approved: wynec checked: allen liu drawn: c.h.han erp: 1202002383 KM2520ZGC-E03 reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsaj9264 rev no: v.3 date: sep/24/2010 page: 5 of 5 approved: wynec checked: allen liu drawn: c.h.han erp: 1202002383 packing & label specifications KM2520ZGC-E03
|
