high precision wraparound - wide ohmic value range thin film chip resistors p vishay sfernice www.vishay.com for technical questions, contact: sfer@vishay.com document number: 53017 60 revision: 14-nov-08 for low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, vishay sfernice?s proven precision thin film wraparound resist ors exceed requirements of mil-prf-55342g characteristics y 10 ppm/c (- 55 c; + 155 c) down to 5 ppm/c (- 25 c; + 85 c). features ? load life stability at 70 c for 2000 h: 0.1 % under pn/0.05 % under pd ? low temperature coefficient down to 5ppm/c (- 25 c; + 85 c) ? very low noise < 35 db a nd voltage coefficient < 0.01 ppm/v ? wide resistance range: 10 to 50 m depending on size ? tolerances to 0.01 % ? in lot tracking 5 ppm/c ? termination: thin film technology ? gold plated or pre-tinned terminations over nickel barrier ? short circuits (jumpers) r < 50 mr, i < 2 a dimensions in millimeters [inches] notes (1) p n = nominal power - pd = derated power intended to improve stability (2) for ohmic range versus tolerance and tcr see detailed table page 2 * pb containing terminations are not rohs compliant, exemptions may apply ** please see document ?vishay green and halogen-free de finitions (5-2008)?: http://www.vishay.com/doc?99902 a d d c e e b case size dimension power rating limiting element voltage v resistance range (2) abcd/e max. tol. + 0.152 [+ 0.006] min. tol. - 0.152 [- 0.006] max. tol. + 0.127 [+ 0.005] min. tol. - 0.127 [- 0.005] max. tol. + 0.127 [+ 0.005] min. tol. - 0.127 [- 0.005] max. tol. + 0.13 [+ 0.005] min. tol. - 0.13 [- 0.005] mw pn (1) pd (1) 0302 0.75 [0.029] 0.60 [0.023] 0.5 [0.02] 0.38 [0.015] 40 30 25 10 - 500 k 0402 1.00 [0.040] 0.60 [0.023] 0.5 [0.02] 0.38 [0.015] 63 40 50 10 - 1 m 0505 1.35 [0.053] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 125 50 50 10 - 2.5 m 0603 1.52 [0.060] 0.75 [0.030] 0.5 [0.02] 0.38 [0.015] 125 100 75 10 - 2.5 m 0705/0805 1.91 [0.075] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 200 125 150 10 - 5 m 1005 2.54 [0.100] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 250 125 75 10 - 5 m 1206 3.06 [0.120] 1.60 [0.063] 0.5 [0.02] 0.38 [0.015] 330 250 200 10 - 15 m 1505 3.81 [0.150] 1.32 [0.054] 0.5 [0.02] 0.38 [0.015] 350 175 75 10 - 10 m 2010 5.08 [0.200] 2.54 [0.100] 0.5 [0.02] 0.38 [0.015] 1000 500 300 10 - 50 m
p high precision wraparound - wide ohmic value range thin film chip resistors vishay sfernice document number: 53017 for technica l questions, contact: sfer@vishay.com www.vishay.com revision: 14-nov-08 61 electrical specifications resistance range: 10 to 50 m resistance tolerance: 0.1 % to 1 % 0.01 % to 0.05 % on y type power dissipation: pn: 40 mw to 1 w pd: 40 mw to 500 mw on tolerance tighter than 0.05 % temperature coefficient: 5 ppm (0 c; 70 c); 10 ppm (- 55 c; + 155 c) climatic specifications operating temp. range: - 55 c to + 155 c for temperature up to 200 c, please consult factory mechanical specifications substrate: alumina technology: thin film film: nickel chromium with mineral passivation or crsi protection: silicone terminations: b type: snpb over nickel barrier for solder reflow n type: snag over nickel barrier g type: gold over nickel barrier for other applications notes (1) reduced operating range: 0 c; + 70 c option available for (- 25 c; + 85 c) (2) r > 50 on request for lower values power derating curve tolerance and tcr versus ohmic value note (3) 5 ppm/c in a reduced operating range (0 c; + 70 c). option available for operating range (- 25 c; + 85 c) upon request with price adder temperature coefficient tcr code film 5 ppm/c (1) znicr 10 ppm/c (2) ynicr 25 ppm/c e nicr 50 ppm/c h nicr or crsi 100 ppm/c k nicr or crsi 070 20 40 60 8 0 100 120 140 155 0 20 40 60 8 0 100 am b ient temperat u re in c rated po w er ( % ) size value range tightest tolerance % best tcr (ppm/c) p0302 10r - 500k 0.1 50 10r - 75k 0.1 25 39r - 75k 0.05 25 39r - 50k 0.05 10 (5) (3) 100r - 50k 0.02 10 (5) (3) 250r - 50k 0.01 10 (5) (3) p0402 10r - 1m 0.1 50 10r - 150k 0.1 25 39r - 150k 0.05 25 39r - 100k 0.05 10 (5) (3) 100r - 100k 0.02 10 (5) (3) 250r - 100k 0.01 10 (5) (3) p0505 10r - 2m5 0.1 50 10r - 300k 0.1 25 39r - 300k 0.05 25 39r - 260k 0.05 10 (5) (3) 100r - 260k 0.02 10 (5) (3) 250r - 260k 0.01 10 (5) (3) p0603 10r - 2m5 0.1 50 10r - 500k 0.1 25 39r - 500k 0.05 25 39r - 332k 0.05 10 (5) (3) 100r - 332k 0.02 10 (5) (3) 250r - 332k 0.01 10 (5) (3) p0705/0805 10r - 5m 0.1 50 10r - 750k 0.1 25 39r - 750k 0.05 25 39r - 511k 0.05 10 (5) (3) 100r - 511k 0.02 10 (5) (3) 250r - 511k 0.01 10 (5) (3) p1005 10r - 5m 0.1 50 10r - 750k 0.1 25 39r - 750k 0.05 25 39r - 500k 0.05 10 (5) (3) 100r - 500k 0.02 10 (5) (3) 250r - 500k 0.01 10 (5) (3) p1206 10r - 15m 0.1 50 10r - 2m 0.1 25 39r - 2m 0.05 25 39r - 1m5 0.05 10 (5) (3) 100r - 1m5 0.02 10 (5) (3) 250r - 1m5 0.01 10 (5) (3) p1505 10r - 10m 0.1 50 10r - 1m 0.1 25 39r - 1m 0.05 25 39r - 750k 0.05 10 (5) (3) 100r - 750k 0.02 10 (5) (3) 250r - 750k 0.01 10 (5) (3) p2010 10r - 50m 0.1 50 10r - 6m 0.1 25 39r - 6m 0.05 25 39r - 3m 0.05 10 (5) (3) 100r - 3m 0.02 10 (5) (3) 250r - 3m 0.01 10 (5) (3)
p vishay sfernice high precision wraparound - wide ohmic value range thin film chip resistors www.vishay.com for technical questions, contact: sfer@vishay.com document number: 53017 62 revision: 14-nov-08 packaging esd packaging available: waffle-pack, and plastic tape and reel (low conductivity). note (1) 12 mm on request packaging rules waffle pack can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. when quantity ordered exce eds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. to get ?not stacked up? waffle pack in case of ordered quantity > maximum number of pieces per package: please consult vishay/sfern ice for specific ordering code tape and reel can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. when quantity ordered is between the moq and the maximum reel capacity, only one reel is provided. when several reels are n eeded for ordered quantity within moq and maximum reel capacity: please consult vishay/sfernice for spec ific ordering code note (2) 0.05 % under pd size moq number of pieces per package tape width waffle pack 2 " 2 " tape and reel min. max. 0302 100 100 100 4000 8 mm 0402 0505 0603 0805 0705 1005 221 1206 140 1505 60 2010 100 2000 8 mm (1) performance tests conditions ta 2 n drifts nicr mil-prf-55342g requirements ty p i c a l performances mil-prf-55342g ty p i c a l performances thermal shock mil-prf-55342g mil-std-202 f-method 107 f 0.25 % 0.02 % 0.05 % 0.02 % short time overload mil-prf-55342g para 3.10.4.7.5 0.10 % 0.01 % 0.05 % 0.01 % low temperature operation mil-prf-55342g para 3.9 and 4.7.4 0.25 % 0.01 % 0.05 % 0.01 % resistance to solder heat mil-prf-55342g para 3.12, 4.7.7, 4.7.1.2 0.25 % 0.04 % 0.05 % 0.03 % moisture resistance mil-prf-55342g para 3.13 and 4.7.8 mil-std-202 f-method 106 e 0.40 % 0.01 % 0.10 % 0.01 % high temperature mil-prf-55342g para 3.11 and 4.7.6 0.20 % 0.075 % 0.05 % 0.05 % load life mil-prf-55342g 2000 h pn at 70 c mil-std-202 f-method 108 a 0.50 % 0.15 % 0.5 % 0.10 % (2)
p high precision wraparound - wide ohmic value range thin film chip resistors vishay sfernice document number: 53017 for technica l questions, contact: sfer@vishay.com www.vishay.com revision: 14-nov-08 63 note ? chips ready to be trimmed available. ( p trim ) - please consult sfernice. (1) for specific quantity of parts per packaging please consult sfernice global part number information new global part numbering: p0505y1003bbt0933 global model size tcr value tolerance termination packaging option p 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 k = 100 ppm/c h = 50 ppm/c e = 25 ppm/c y = 10 ppm/c x = jumper z = 5 ppm (0.70 c) the first three digits (2 digits are enough for tolerance g and j) are significant figures and the last digit specifies the number of zeros to follow, r designates decimal point 10r0 = 10 3901 = 3900 1004 = 1 m 0r00 = jumper l = 0.01 % p = 0.02 % w = 0.05 % b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % g = 2 % j = 5 % s = special x = jumper b: snpb over nickel barrier n: snag over nickel barrier g: gold over nickel barrier blank = waffle pack t = tape (1) leave blank if no option b: lead bearing version n and g: lead (pb)-free/ rohs version historical part number example: p 0505 y 1003 b b tr r0933 e2 p 0505 y 1003 b b tr r0933 e2 historical model size tcr value tolerance termination packaging option rohs p 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 k = 100 ppm/c h = 50 ppm/c e = 25 ppm/c y = 10 ppm/c x = jumper z = 5 ppm (0.70 c) the first three digits (2 digits are enough for tolerance g and j) are significant figures and the last digit specifies the number of zeros to follow, r designates decimal point 10r0 = 10 3901 = 3900 1004 = 1 m 0r00 = jumper l = 0.01 % p = 0.02 % w = 0.05 % b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % g = 2 % j = 5 % s = special x = jumper b: snpb over nickel barrier n: snag over nickel barrier g: gold over nickel barrier blank = waffle pack tr = tape (1) leave blank if no option e2: tin/silver e4: gold blank: snpb b: lead bearing version n and g: lead (pb)-free/ rohs version 0505y1003 p bbt 0 9 33
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
