thin film, rectangular, resistor chips www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 20028 202 revision: 08-jan-09 m10, m11, m12, m25 vishay draloric not for new designs, alternatively please use tnpw e3 features ? metal film layer on high quality ceramic ? protective top coat ? pure tin on nickel barrier layer ? low temperature coefficient and tight tolerances ? 56 days at 40 c and 93 % relative humidity down to 0.2 % notes: ? power rating depends on the max. temperature at the solder point, the component placement density and the substrate material ? marking: 4 digits, m10 - no marking notes: (1) measuring conditions in acc. with en 140 401-801 (2) rated voltage: rohs compliant standard electrical specifications model size power rating p 70 c limiting element voltage max. v ? temperature coefficient ppm/k tolerance % resistance range e-series inch metric en 140 401-801 eia 575 m10 0402 1005 0.063 0.063 25 25 0.5; 1 10r - 20k 24 - 96 50 0.5 10r - 20k m11 0603 1608 0.1 0.063 75 25 0.1; 0.25; 0.5; 1 10r - 56k 24 - 96 50 0.1; 0.25; 0.5; 10r - 56k m12 0805 2012 0.125 0.1 150 25 0.1; 0.25; 0.5; 1 10r - 100k 24 - 96 50 0.1; 0.25; 0.5; 10r - 100k m25 1206 3216 0.25 0.125 200 25 0.1; 0.25; 0.5; 1 10r - 220k 24 - 96 50 0.1; 0.25; 0.5; 10r - 220k technical specifications parameter unit m10 m11 m12 m25 rated dissipation at 70 c (en 140 401-801| eia 575) w 0.063 0.1 0.063 0.125 0.1 0.25 0.125 limiting element voltage (2) v ? 25 75 150 200 insulation voltage (1 min) v dc/ac peak > 50 > 100 > 200 > 300 thermal resistance (1) k/w 870 (1) - 550 (1) - 440 (1) - 220 (1) - insulation resistance > 10 9 category temperature range c - 55 to + 125 (+ 155) failure rate h -1 0.3 x 10 - 9 weight/1000 pieces g 0.65 2 5.5 10 p x r
document number: 20028 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 08-jan-09 203 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric not for new designs, alternatively please use tnpw e3 dimensions notes: (1) please refer to table packaging, page 146 (2) products can be ordered using either t he product description or the part number size dimensions [ in millimeters] inch metric l w h t1 t2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.1 0.2 0.1 0603 1608 1.55 0.85 0.1 0.45 0.05 0.30 0.2 0.3 0.2 0805 2012 2.0 1.25 0.15 0.45 0.05 0.30 0.3 0.2 1206 3216 3.2 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 solder pad dimensions [in millimeters] size reflow wave soldering inch metric a b l a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.4 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 part number and product description part numbering: m1004020d5620dp000 model/size special character tcr value tolerance pac k ag i n g (1) special m100402 m110603 m120805 m251206 0 = neutral d = 25 ppm/k c = 50 ppm/k 3 digit value 1 digit multiplier multiplier 8 = *10 - 2 9 = *10 - 1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % p0 p1 p5 pn pz up to 2 digits 00 = standard product description: m10 25 562r 0.5 % p0 m10 25 562r 0.5 % p0 model tcr resistance value tolerance pac k ag i n g (1) m10 m11 m12 m25 25 ppm/k 50 ppm/k 49k9 = 49.9 k 5r1 = 5.1 0.1 % 0.25 % 0.5 % 1 % p0 p1 p5 pn pz + 0.10 - 0.05 + 0.20 - 0.10 + 0.10 - 0.20 + 0.20 - 0.10 m 0 1 0 0 4 0 2 0 d 5 6 2 0 d p 0 0
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 20028 204 revision: 08-jan-09 m10, m11, m12, m25 vishay draloric thin film, rectangular , resistor chips not for new designs, alternatively pl ease use tnpw e3 note: (1) for tcr 25 ppm/k and tolerance 0.1 % only packaging model reel tape width diameter pieces/reel packing code paper m10 8 mm 180 mm/7" 330 mm/13" 10 000 50 000 p0 pz m11 m12 m25 8 mm 180 mm/7" 180 mm/7" 330 mm/13" 1000 (1) 5000 20 000 p1 p5 pn temperature rise 90 8 0 70 60 50 40 30 20 10 0 0 0.1 0.2 0.3 0.4 0.5 power in w 0402 1206 0 8 05 0603 temperature in rise in c deratin g 120 100 8 0 60 40 20 0 - 55 -25 0 25 50 75 100 125 150 175 ambient temperature in c 70 rated power i n % 120 11 0 100 90 8 0 70 60 10 100 1k 10k 100k non-linearity non-li neari ty a 3 in db resistance value in w m1 0 m2 5 m1 2 m1 1 3 2 1 current noise current noi se in v/v resistance value in w 0.5 0.3 0.1 0.01 0.03 0.05 100 1k 10k 100k 1m m10 m11 m12 m25
document number: 20028 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 08-jan-09 205 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric not for new designs, alternatively please use tnpw e3 60 40 20 0 - 20 - 40 - 60 - 8 0 hf performance s a h pe an g l e n i ? frequency f in mhz 2 5 10 50 100 500 1000 10k 4.75k 1k 100 10 m11 60 40 20 0 - 20 - 40 - 60 - 8 0 hf performance 2 5 10 50 100 500 1000 o r - ] z [ n i % o r 10 100 100 100 100 100 1k 4.75k 10k m11 60 40 20 0 - 20 - 40 - 60 - 8 0 2 5 10 50 100 500 1000 m12 10 100 1k 10k 60 40 20 0 - 20 - 40 - 60 - 8 0 2 5 10 50 100 500 1000 10 100 1k m12 10k 1k 100 10 sin g le-pulse hi g h volta g e overload test 1.2/50 s en140000 4.27 test volta g e in v resistance value in 10r 100r 1k 10k 100k 3k m12 m11 1k 100 10 10r 100r 1k 10k 100k 3k m12 m11 frequency f in mhz hf performance s a h pe an g l e n i ? frequency f in mhz hf performance o r - ] z [ n i % o r frequency f in mhz sin g le-pulse hi g h volta g e overload test 10/700 s en140000 4.27 resistance value in test volta g e in v
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 20028 206 revision: 08-jan-09 m10, m11, m12, m25 vishay draloric thin film, rectangular , resistor chips not for new designs, alternatively pl ease use tnpw e3 assembly the suitability of conformal coatings, if appl ied, shall be qualified by appropriate m eans to ensure the long-term stability of the whole system. 10 1 0.1 10 -5 10 -4 10 -3 10 -2 10 -1 110 100 0.01 pulse ratin g p 0 secondary conditions: a) p 0 (peak pulse, sin g le pulse) b) ? u 70 c c) u max see dia g ram (max pulse volta g e) m25 m10 m12 m11 power ratin g p in w square pulse t i in s 1 0.1 10 -5 10 -4 10 -3 10 -2 10 -1 110 0.01 pulse ratin g p p 70 10 100 secondary conditions: a) p p70 (permissible constant power at ? u = 70 c) b) ? u 70 c c) u max see dia g ram (max pulse volta g e) m10 m11 m12 m25 power ratin g p in w square pulse t i in s square pulse t i in s 10 -5 10 -4 10 -3 10 -2 10 -1 110 maximum pulse volta g e 1000 pulse volta g e max in v 8 00 600 400 200 0 m25 m12 m11 m10 secondary conditions: a) p see dia g ram (pulse ratin g ) b) ? u 70 c
document number: 20028 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 08-jan-09 207 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric not for new designs, alternatively please use tnpw e3 performance test conditions of test test results tolerances 0.1 %/ 0.25 % 0.5 %/ 1.0 % endurance test at 70 c iec 60115-1 4.25.1 1000 h at 70 c, 1.5 h ?on?, 0.5 h ?off? 0.2 % 0.5 % endurance at uct iec 60115-1 4.25.3 1000 h at 125 c without load 0.2 % 0.5 % overload test iec 60115-1 4.13 short time overload for 2 s 2.5 x rated voltage or 2 x limiting element voltage 0.05 % 0.1 % thermal shock iec 60115-1 4.19, iec 60068-2-14 rapid change between upper and lower category temperature 0.05 % 0.1 % damp heat steady state iec 60115-1 4.24, iec 60068-2-3 56 days at 40 c and 93 % relative humidity 0.2 % 0.5 % resistance to soldering heat iec 60115-1 4.18, iec 60068-2-20 10 s at 260 c solder bath temperature 0.05 % 0.2 % applicable specifications ? cecc40000/40400/40401-801 ? en140400/iec 60115 - 1/en 140 401-801
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
