asmt-qybb-nxxxx super 0.5w warm white power plcc-4 surface mount led indicator data sheet caution: asmt-qybb-nxxxx leds are class 2 esd sensitive. please observe appropriate precautions during handling and processing. refer to avago application note an-1142 for additional details. description the super 0.5w warm white power plcc-4 smt led is warm white mid-power plcc-4 smt leds using ingan chip technology. the package can be driven at high current due to its superior package design. the product is able to dissipate the heat more efciently compared to the power plcc-4 smt leds. these leds produce higher light output with better fux performance compared to the power plcc-4 smt led. the super 0.5w warm white power plcc-4 smt leds are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. the performance characteristics of these new mid-power leds make them uniquely suitable for use in harsh condi - tions such as in automotive applications, and in electronics signs and signals. to facilitate easy pick and place assembly, the leds are packed in eia-compliant tape and reel. every reel is shipped in single intensity and color bin, to provide close uniformity. features ? industry standard plcc 4 platform (3.2x2.8x1.9mm) ? high reliability package with enhanced silicone resin encapsulation ? high brightness with optimum fux performance using ingan chip technologies ? available in warm white ? available in 8mm carrier tape & 7 inch reel ? low thermal resistance 40c/w ? wide viewing angle at 120 degree ? jedec msl 2 applications 1. interior automotive a. instrument panel backlighting b. central console backlighting c. navigation and audio system backlighting d. dome/map lighting e. push button backlighting f. puddle lamp g. glove compartment illumination 2. exterior automotive a. number plate illumination 3. electronic signs and signals a. decorative lighting 4. ofce automation, home appliances, industrial equipment a. panel/button backlighting b. display backl-ighting
2 package drawing table 1. device selection guide (t j = 25 c) color part number luminous flux, v [1] (lm) dice technology min. flux (lm) typ. flux (lm) max. flux (lm) test current (ma) warm white asmt-qybb-nfg0e 15.0 22.5 25.5 150 ingan notes: 1. v is the total luminous fux output as measured with an integrating sphere at mono pulse conditions. 2. tolerance = 12% part numbering system note: 1. all dimensions in millimeters. 2. lead polarity as shown in figure 12. 3. terminal finish: ag plating 4. encapsulation material: silicone resin figure 1. package drawing 3.6 0.2 0.7 3.2 0.2 2.8 0.2 2.2 0.2 1.9 0.2 0.6 0.3 c c a a 0.79 0.3 cathode marking ? 2.4 1.15 0.2 0.41 (typ.) 0.56 (typ.) 0.97 a s m t - q x 1 b b ? n x 2 x 3 x 4 x 5 packaging option colour bin selection max. flux bin selection min. flux bin selection color y - warm white
3 table 2. absolute maximum ratings (t a = 25c) parameters asmt-qybb-nxxxx dc forward current [1] 150 ma peak forward current [2] 300 ma power dissipation 615 mw reverse voltage not recommended junction temperature 125c operating temperature -40c to +110c storage temperature -40c to +110c notes: 1. derate linearly as shown in figure 6. 2. duty factor = 10%, frequency = 1khz table 3. optical characteristics (t j = 25c) color part number dice technology typical chromaticity coordinates viewing angle 2 ? [1] (degrees) luminous efciency e (lm/w) total flux / luminous intensity v (lm) / i v (cd) x y typ. typ. typ. warm white asmt-qybb-nxxxx ingan 0.41 0.39 120 43 2.85 notes: 1. ? is the of-axis angle where the luminous intensity is ? the peak intensity. table 4. electrical characteristics (t j = 25c) part number forward voltage v f (volts) @ i f = 150 ma thermal resistance r j-p (c/w) typ. max. asmt-qybb-nxxxe 3.5 4.1 40
4 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 temperature (c) current - ma r ja = 90c/w r ja = 110c/w 0.0 0.2 0.4 0.6 0.8 1.0 0 25 50 75 100 125 150 dc forward current - ma relative luminous flux (normalized at 150 ma) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 -50 -25 0 25 50 75 100 t j - junction temperature - c relative luminous flux (normalized at 25c) 0.00 0.10 0.20 0.30 0.40 0.00001 0.0001 0.001 0.01 0.1 0 10 100 t p - time - (s) current - a current - a 0.00001 0.0001 0.001 0.01 0.1 0 10 100 t p - time - (s) 0.00 0.10 0.20 0.30 0.40 d = t p t t p i f t d = 0.05 0.10 0.25 0.50 1 d = 0.05 0.10 0.25 0.50 1 d = t p t t p i f t 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 temperature (c) current - ma r jp = 40c/w figure 4. relative flux vs. forward current figure 5. relative flux vs. temperature figure 6a. maximum forward current vs. ambient temperature. derated based on t jmax = 125c, r t j-a =110c/w & 90c/w. figure 6b. maximum forward current vs. solder point temperature. derated based on t jmax = 125c, r t j-p =40c/w. figure 2. relative intensity vs. wavelength figure 3. forward current vs. forward voltage. 0 50 100 150 200 250 300 0 1 2 3 4 forward voltage - v forward current - ma 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 380 430 480 530 580 630 680 730 780 wavelength - nm relative intensity
5 figure 8. forward voltage shift vs. temperature. figure 9. radiation pattern -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 -50 -25 0 25 50 75 100 t j - junction temperature - c forw ard vol t a ge shift - v -0.008 -0.006 -0.004 -0.002 0.000 0.002 0.004 0.006 -0.004 -0.003 -0.002 -0.001 0.000 0.001 0.002 x coordinate y coordinate 2ma 5ma 10ma 50ma 100ma 150ma 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -90 -60 -30 0 30 60 90 angular displacement - degrees normalized intensity 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 temperature (c) current - ma r ja = 90c/w r ja = 110c/w 0.0 0.2 0.4 0.6 0.8 1.0 0 25 50 75 100 125 150 dc forward current - ma relative luminous flux (normalized at 150 ma) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 -50 -25 0 25 50 75 100 t j - junction temperature - c relative luminous flux (normalized at 25c) 0.00 0.10 0.20 0.30 0.40 0.00001 0.0001 0.001 0.01 0.1 0 10 100 t p - time - (s) current - a current - a 0.00001 0.0001 0.001 0.01 0.1 0 10 100 t p - time - (s) 0.00 0.10 0.20 0.30 0.40 d = t p t t p i f t d = 0.05 0.10 0.25 0.50 1 d = 0.05 0.10 0.25 0.50 1 d = t p t t p i f t 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 temperature (c) current - ma r jp = 40c/w figure 7a. maximum pulse current vs. ambient temperature. derated based on t a = 25c, r t j-a =110c/w. figure 7b. maximum pulse current vs. ambient temperature. derated based on t a = 85c, r t j-p =110c/w.
6 figure 12. recommended soldering pad pattern figure 10. recommended pick and place nozzle size figure 11. recommended pb-free refow soldering profle note: for detail information on refow soldering of avago surface mount leds, do refer to avago application note an 1060 surface mounting smt led indicator components. note: diameter "d" should be smaller than 2.2mm d 217 c 200 c 60 - 120 sec. 6 c/sec. max. 3 c/sec. max. 3 c/sec. max. 150 c 255 - 260 c 100 sec. max. 10 to 30 sec. time temperature c a thode marking c a thode marking a c a a c c c c solder mask anode c a thode 0.4 0.3 minimum 55 mm 2 of c a thode p ad for improved hea t dissip a tion 2.4 0.6 0.9 x 6 4.6 1.1 1.3 x 6 a a c c
7 figure 14. tape dimensions figure 15. reeling orientation cathode side printed label user feed direction figure 13. tape leader and trailer dimensions 3.8 0.1 2.29 0.1 0.229 0.01 all dimensions in mm. 2 0.05 4 0.1 4 0.1 3.05 0.1 3.5 0.05 8 +0.3 ?0.1 1.75 0.1 ?1.5 +0.1 ?0 8 ?1 +0.1 ?0 a a c c 200 mm min. for ?180 reel. 200 mm min. for ?330 reel. trailer component leader 480 mm min. for ?180 reel. 960 mm min. for ?330 reel. c a user feed direction
8 handling precaution the encapsulation material of the product is made of silicone for better reliability of the product. as silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. these might damage the product and cause premature failure. during assembly or handling, the unit should be held on the body only. please refer to avago application note an 5288 for detail information. moisture sensitivity this product is qualifed as moisture sensitive level 2 per jedec j-std-020. precautions when handling this moisture sensitive product is important to ensure the reli - ability of the product. do refer to avago application note an5305 handling of moisture sensitive surface mount devices for details. a. storage before use - unopen moisture barrier bag (mbb) can be stored at <40c/90%rh for 12 months. if the actual shelf life has exceeded 12 months and the hic indicates that baking is not required, then it is safe to refow the leds per the original msl rating. - it is not recommended to open the mbb prior to assembly (e.g. for iqc). b. control after opening the mbb - the humidity indicator card (hic) shall be read immediately upon opening of mbb. - the leds must be kept at <30c / 60%rh at all time and all high temperature related process including soldering, curing or rework need to be completed within 1 year. c. control for unfnished reel - for any unuse leds, they need to be stored in sealed mbb with desiccant or desiccator at <5%rh. d. control of assembled boards - if the pcb soldered with the leds is to be subjected to other high temperature processes, the pcb need to be stored in sealed mbb with desiccant or desiccator at <5%rh to ensure no leds have exceeded their foor life of 1 year. e. baking is required if: - 60% hic indicator is not blue. - the leds are exposed to condition of >30c / 60% rh at any time. - the leds foor life exceeded 1 year. recommended baking condition: 605c for 20 hours. device color (x 1 ) y warm white flux bin select (x 2 x 3 ) individual reel will contain parts from one bin only x 2 min flux bin x 3 max flux bin flux bin limits bin id min. (lm) max. (lm) b 5.50 7.00 c 7.00 9.00 d 9.00 11.50 e 11.50 15.00 f 15.00 19.50 g 19.50 25.50 h 25.50 33.00 j 33.00 43.00 k 43.00 56.00 l 56.00 73.00 j 43.00 56.00 k 56.00 73.00 tolerance of each bin limit = 12% color bin select (x 4 ) individual reel will contain parts from one sub bin only. x 4 0 full distribution a h, j and k only b h, j, k, l and m only c l and m only d l, m, n and p only e n and p only f n, p, q and r only g q and r only z special color bin
9 color bin limits bin id sub bin id limits (chromaticity coordinates) h h3 x 0.348 0.360 0.364 0.350 y 0.332 0.341 0.358 0.348 h4 x 0.350 0.364 0.367 0.352 y 0.348 0.358 0.376 0.365 h5 x 0.352 0.367 0.371 0.354 y 0.365 0.376 0.392 0.381 j j3 x 0.360 0.373 0.378 0.364 y 0.341 0.350 0.368 0.358 j4 x 0.364 0.378 0.383 0.367 y 0.358 0.368 0.386 0.376 j5 x 0.367 0.383 0.388 0.371 y 0.376 0.386 0.403 0.392 k k3 x 0.373 0.387 0.393 0.378 y 0.350 0.358 0.376 0.368 k4 x 0.378 0.393 0.399 0.383 y 0.368 0.376 0.395 0.386 k5 x 0.383 0.399 0.405 0.388 y 0.386 0.395 0.412 0.403 l l3 x 0.387 0.400 0.407 0.393 y 0.358 0.366 0.384 0.376 l4 x 0.393 0.407 0.414 0.399 y 0.376 0.384 0.402 0.395 l5 x 0.399 0.414 0.421 0.405 y 0.395 0.402 0.420 0.412 m m3 x 0.400 0.413 0.421 0.407 y 0.366 0.372 0.390 0.384 m4 x 0.407 0.421 0.429 0.414 y 0.384 0.390 0.409 0.402 m5 x 0.414 0.429 0.436 0.421 y 0.402 0.409 0.426 0.420 n n3 x 0.413 0.425 0.434 0.421 y 0.372 0.378 0.396 0.390 n4 x 0.421 0.434 0.443 0.429 y 0.390 0.396 0.414 0.409 n5 x 0.429 0.443 0.451 0.436 y 0.409 0.414 0.430 0.426 bin id sub bin id limits (chromaticity coordinates) p p3 x 0.425 0.438 0.447 0.434 y 0.378 0.382 0.400 0.396 p4 x 0.434 0.447 0.456 0.443 y 0.396 0.400 0.417 0.414 p5 x 0.443 0.456 0.465 0.451 y 0.414 0.417 0.434 0.430 q q3 x 0.438 0.450 0.460 0.447 y 0.382 0.386 0.403 0.400 q4 x 0.447 0.460 0.470 0.456 y 0.400 0.403 0.420 0.417 q5 x 0.456 0.470 0.479 0.465 y 0.417 0.420 0.436 0.434 r r3 x 0.450 0.462 0.472 0.460 y 0.386 0.389 0.405 0.403 r4 x 0.460 0.472 0.482 0.470 y 0.403 0.405 0.422 0.420 r5 x 0.470 0.482 0.491 0.479 y 0.420 0.422 0.437 0.436 tolerance of each bin limit = 0.02.
v f bin limits bin id min. max. s5 3.20 3.50 s6 3.50 3.80 s7 3.80 4.10 tolerance of each bin limit = 0.1v packaging option (x 5 ) option test current package type reel size e 150ma top mount 7 inch 0.31 0.33 0.35 0.37 0.39 0.41 0.43 0.45 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x-coordinate y-coordinate h3 h5 h4 j3 j4 j5 k3 k4 k5 l3 l4 l5 m3 m4 m5 n3 n4 p3 p4 p5 q3 q4 q5 r3 r4 r5 n5 4800k - 3650k 3650k - 3150k 3150k - 2800k 2800k - 2500k for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2009 avago technologies. all rights reserved. av02-1323en - september 28, 2009
|
