spec no: dsaf0988 rev no: v.2 date: mar/29/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: s.h.chen erp:1204000148 - 01 package dimension s description the super bright yellow source color devices are made with dh ingaalp on gaas substrate light emitting diode. apk3020syck - f01 super bright yellow features z 3.0mmx2.0mm smt led, 1.3mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package: 2000pcs/reel. z rohs compliant. 3.0x2.0mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subject to change without notice.
spec no: dsaf0988 rev no: v.2 date: mar/29/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: s.h.chen erp:1204000148 - 01 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 apk3020syck - f01 super bright yellow (ingaaip) water clear 36 120 120 symbol parameter device typ. max. test conditions units peak peak wavelength super bright yellow 590 nm i f =20ma d dominant wavelength super bright yellow 590 nm i f =20ma ? 1/2 spectral line half - width super bright yellow 20 nm i f =20ma c capacitance super bright yellow 20 pf v f =0v;f=1mhz v f forward voltage super bright yellow 2.0 2.5 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v parameter super bright yellow units power dissipation 125 mw dc forward current 30 ma peak forward current [1] 175 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaf0988 rev no: v.2 date: mar/29/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: s.h.chen erp:1204000148 - 01 super bright yellow apk3020syck - f01
spec no: dsaf0988 rev no: v.2 date: mar/29/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: s.h.chen erp:1204000148 - 01 recommended soldering pattern (units : mm ) tape specifications (units : mm ) apk3020syck - f01 remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
