d-44 apem www.apem.com kg series power rocker switches distinctive features and specifications d rear protection or sealing the kg switches are also available with wire lead terminals (lead 16awg max.) : ?models with protection cover, as shown on photo below, ?models with rear sealing provided by the overmoulding of terminals in a resin base. on request. agency approval availability : double pole models, functions on-off and on-on. marking : to order switches marked vde, add ?de?at the end of model number. packaging unit : 40 pieces ? ? illuminated or non-illuminated ? ? protected rocker ? ? sealed to ip 65 ? ? laser marking ? ? vde (en 61058-1) approved electrical specifications ?currrent/voltage rating : - functions 1 (on-off) and 6 (on-on) : 15a 12vdc, 10a 24vdc, 15a 250vac max., 10ma 14vdc min. - functions 4 ( on on on) and 4-1r (on on mom) : 8a 12vdc, 5a 24vdc, 8a 250vac max. - other functions : 10a 12vdc, 8a 24vdc, 10a 250vac max. ?vde approved ratings : 12(4)a 250vac, t85/55? ?initial contact resistance : 10 m max. at 1a 2vdc ?insulation resistance : 1.000 m min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals ?electrical life : 10.000 cycles min. ?mechanical life : 2 position models : 100.000 cycles min. 3 position models : 30.000 cycles min. materials ?case and bezel : thermoplastic ul94-v0 ?terminals : brass, silver plated ?contacts : silver grain contact roller : brass, nickel plated environmental specifications ?degree of protection : ip 65 ?shock resistance : 100 g according to iec 512-4, test 6c ?vibration resistance : 10-500 hz - 10 g according to iec 512-4, test 6d ?salt spray resistance : 96 hours according to iec 512-6, test 11f ?moisture resistance : 56 days according to iec 68-2-3 ?operating temperature : 2 position models : -40? to + 85? 3 position models : -10? to + 65? matrix mounting 25.00 mini. (.984 min.) 4.00 (.157) (1.929 min.) 49.00 mini. (.480) 12.20 dimensions : first dimensions are in mm while inches are shown as bracketed numbers. en 61058-1
apem www.apem.com d-45 kg series power rocker switches case d panel cut - out panel thickness : 0,8 mm to 4,6 mm recommended thickness : between 2 mm and 3,5 mm 2 3 6 2 5 1 4 (.122dia) 3.10 4.50 (.177) (.25x.031) 6.35x0.80 model structure 2 31 36.80 (1.449) 21.08 (.830) 2-3 1-2 5-6 4-5 single pole double pole kg31 kg41 on - off kg44* on on on kg44-1r* on on mom kg35 kg45 mom - on kg36 kg46 on - on kg37 kg47 mom off mom kg38 kg48 on off mom kg39 kg49 on off on 24.50 (.964) (.925) 23.50 (.413) 10.50 (.472) 12.00 43.70 (1.720) (.576) 14.65 (.269) 6.85 (.787) 20.00 11.00 (.433) (1.909) 48.50 * function 4 : single pole in double pole case terminals 0 3 screw solder lug / quick-connect quick-connect (.031) (.118diax0.50 is) 3.00x0.50 si 0.80 6.35 (.25) ?.50 (.059dia) 6.35x0.80 (.250x.031) contact materials a silver grain functions on-off and on-on : 15a 12vdc , 10a 24vdc, 15a 250vac max. - 10ma 14 vdc min. other functions : 10a 12vdc, 8a 24vdc, 10a 250vac max. case + lamps rocker lens marking terminals 1 to 6 are marked on the case. side a : terminals 1 and 4 side b : terminals 3 and 6 side a side b ? flat seal
c d - for function 1 (on-off) with lamp on side a e b d-46 apem www.apem.com kg series power rocker switches lamps d 6 3 6 5 4 2 5 1 4 6 3 3 5 2 1 4 2 1 6 3 5 4 2 1 2 5 3 6 1 4 + - - + 4 1 6 3 5 2 a (standard) 2 5 3 6 1 4 + - - + 4 1 6 3 5 2 lamps x without lamp a 6v led red b c d e f j k l m n o p r 6v led green 6v led yellow 12v led red 12v led green 12v led yellow g 18v led red h 18v led green i 18v led yellow 24v led red 24v led green 24v led yellow neon 125v neon 250v filament 6v filament 12v filament 24v s fluorescent 220v t fluorescent 110v side a side a side b side b complete each enlarged box with one of the codes listed below. lamp wiring bezel 2 black, sealed to ip 65 to order case only (without rocker), finish your order number with the lamp wiring code. the lamp wiring diagram is shown on the case. 2 5 3 6 1 4 + - - + 4 1 6 3 5 2 2 5 3 6 1 4 + - 2 5 3 6 1 4 + 4 1 6 3 5 2 2 5 3 6 1 4 + 4 1 6 3 5 2 - -
apem www.apem.com d-47 kg series power rocker switches rockers - lenses d rocker colour rocker shape 1 blue 1/4 dark blue 2 3 4 black green grey 5 6 7 9 yellow red ivory orange 1 full rocker opening on side a opening on side b opening on sides a and b 4 6 8 lens colour x 3 6 9 1 b t no lens green * red orange blue * white translucent complete each enlarged box with one of the codes listed below. 6 5 4 6 3 5 2 3 2 4 1 1 side a side a side b side b to order rocker only (without case), begin the order number with code kgr, then follow the order format from ?ocker colour?until the end of the options. to order lenses only, begin the order number with the codes : kgla for lens a and kglb for lens b, then follow the order format from ?ens colour?until the end of the options. other rocker shapes on customer specifications : on request. * blue or green lens recommended with fluorescent lamp.
d-48 apem www.apem.com kg series power rocker switches marking d marking if no marking required, leave all boxes blank. l c laser (on request) code symbol description xx none - - - - - - - stop motion up motion code symbol description 10 down motion hot windshield demister/defroster windshield wiper windshield washer ventilator side mirror defroster restarting pump front fog lights rear fog lights cold hazard lights traveller lighting driver lighting revolving light rear ventilator heating door opening 11 12 20 13 14 15 16 17 18 19 21 22 23 24 25 26 27 01 02 03 04 05 06 07 08 09 marking method hot stamping marking orientation vh select one option from each of the tables below. white marking for black rockers - black marking for colour rockers - other : on request. marking in m area : on request. other orientations : on request symbols 6 5 4 3 2 1 4 5 6 1 2 3 6 5 4 3 2 1 a a m b mb on off stop a m 1 2 1 2
|
