View ASMT-MYE0-NMNV0_3750168.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

asmt-fmx2xf/fasmt-fmxex moonstone tm 3w power led light source data sheet description the moonstone? 3w power led light source is a high performance energy efcient device which can handle high thermal and high driving current. the exposed pad design has excellent heat transfer from the package to the motherboard. the cool white power led is available in various color temperature ranging from 4000k to 10000k and warm white power led ranging from 2600k to 4000k. the low profle package design is suitable for a wide variety of applications especially where height is a constraint. the package is compatible with refow soldering. this will give more freedom and fexibility to the light source designer. applications ? sign backlight ? safety, exit and emergency sign lightings ? specialty lighting such as task lighting and reading lights ? retail display ? commercial lighting ? accent or marker lightings, strip or step lightings ? portable lightings, bicycle head lamp, torch lights. ? decorative lighting ? architectural lighting ? pathway lighting ? street lighting ? pedestrian street lighting ? tunnel lighting features ? available in cool white & warm white color ? energy efcient ? exposed pad for excellent heat transfer ? suitable for refow soldering process ? high current operation ? long operation life ? wide viewing angle ? silicone encapsulation ? non-esd sensitive (threshold > 16kv) ? msl 4 products ? available in both electrically isolated and non-isolated metal heat slug specifcations ? ingan technology ? 4.3 v (max) at 700 ma ? 120 viewing angle
2 packagefdimensions notes: 1. all dimensions are in millimeters. 2. unless otherwise stated, the tolerance for dimension is 0.1mm. 3. metal slug is connected to anode for electrically non-isolated option. devicefselectionfguidef(t j f=f25c) f color f partfnumber luminousfflux,f v [1,2] f(lm) testfcurrent (ma) die technology electrically isolatedfmetalfslug min. typ. max. cool white asmt-mw20 124 145 161 700 ingan no asmt-mw22 yes warm white asmt-my20 95 125 161 700 ingan no asmt-my22 yes cool white difused asmt-mwe0 95 125 161 700 ingan no asmt-mwe2 yes warm white difused asmt-mye0 95 110 161 700 ingan no asmt-mye2 yes notes: 1. v is the total luminous fux output as measured with an integrating sphere at 25ms mono pulse condition. 2. flux tolerance is 10%. metal slug cathode anode 1 2 3 10.00 8.50 3 1 2 8.50 ? 5.2 6 ? 8.0 0 5.08 0.81 2.00 5.25 1.30 10.60 1.27 3.30 heat sink led zener + ?
3 partfnumberingfsystem absolutefmaximumfratingsf parameter asmt-mx2xf/fasmt-mxex units dc forward current [1] 700 ma peak pulsing current [2] 1000 ma power dissipation 3010 mw reverse voltage 5 v led junction temperature 125 c operating metal slug temperature range at 700ma -40 to +95 c storage temperature range -40 to +120 c soldering temperature refer to figure 10 note: 1. derate linearly based on figure 8. 2. pulse condition: duty factor = 10%, frequency = 1 khz. note: 1. please refer to page 7 for selection details. asmt-m x x x ? n x 1 x 2 x 3 x 4 packaging option color bin selection max flux bin selection min flux bin selection color silicone type heat sink 0 ? electrically non-isolated 2 ? electrically isolated w ? cool white y ? warm white 2 ? non-diffused e ? diffused
4 opticalfcharacteristicsfatf700fmaf(t j f=f25c) partfnumber color correlatedfcolorftemperature,f cctf(kelvin) viewingfanglef f 2 ? f [1] f() luminousfefciencyf (lm/w) min. max. typ. typ. asmt-mw20 asmt-mw22 cool white 4000 10000 120 52 asmt-my20 asmt-my22 warm white 2600 4000 120 45 asmt-mwe0 asmt-mwe2 cool white difused 4000 10000 120 45 asmt-mye0 asmt-mye2 warm white difused 2600 4000 120 41 notes: 1. ? is the of-axis angle where the luminous intensity is ? the peak intensity. electricalfcharacteristicfatf700fmaf(t j f=f25c) diceftype forwardfvoltage, f v f ff(volts)fatfi f f=f700fma thermalfresistance,f f r j-ms f f(c/w) [1] temperaturefcoefcient f offforwardfvoltagef(mv/c),f ? vf f / ? t j min. typ. max. typ. typ. ingan 3.6 4.0 4.3 10 -1.5 to -3.5 note: 1. r j-ms is the thermal resistance from led junction to metal slug. typicalfcharacteristicfatf350fmaf(t j f=f25c) partfnumber color luminousfflux,f v f(lm) forwardfvoltage,f v f f(volts) typ. typ. asmt-mw20 asmt-mw22 cool white 80 3.6 asmt-my20 asmt-my22 warm white 70 3.6 asmt-mwe0 asmt-mwe2 cool white difused 70 3.6 asmt-mye0 asmt-mye2 warm white difused 65 3.6
5 figuref1.frelativefintensityfvs.fwavelength. figuref2.frelativefluminousffluxfvs.fforwardfcurrent. figuref3.fforwardfcurrentfvs.fforwardfvoltage. figuref4.fradiationfpattern. figuref5.fmaximumfpulsefcurrentfvs.fambientftemperature.f f deratedfbasedfonft a f=f25c,ffr j-a f=f30c/w. f f f f fffff figuref6.fmaximumfpulsefcurrentfvs.fambientftemperature.f f deratedfbasedfonft a f=f85c,ffr j-a f=f30c/w. f f f f fffff 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 380 430 480 530 580 630 680 730 780 wavelength - nm relative intensity warm white cool white 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 100 200 300 400 500 600 700 dc forw ard current - ma rel a tive l uminous fl ux (normalized a t 700 ma) 0 100 200 300 400 500 600 700 0 1 2 3 4 5 forward voltage - v forward current - ma 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 -90 -60 -30 0 30 60 90 angular displacement - degrees normalized intensity 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.00001 0.0001 0.001 0.01 0.1 1 10 100 pulse duration, t p - sec pulse duration, t p - sec pulse current, i p - a pulse current, i p - a d = 0.05 0.10 0.25 0.50 1.00 d = t p t t p i f t 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.00001 0.0001 0.001 0.01 0.1 1 10 100 d = 0.05 0.10 0.25 0.50 1.00 d = t p t t p i f t
6 figuref8.fmaximumfforwardfcurrentfvs.fambientftemperature. deratedfbasedfonft jmax f=f125c,fr j-a f=f20c/w,f25c/wfandff30c/w. figuref9.fmaximumfforwardfcurrentfvs.fmetalfslugftemperature. deratedfbasedfonft jmax f=f125c,fr j-ms f=f10c/w. figuref10.frecommendedfrefowfsoldering. figuref11.frecommendedfsolderingflandfpattern. (acc. to j-std-020c) 217 c 200 c 60 - 120 sec. 6 c/sec. max. 3 c/sec. max. 3 c/sec. max. 150 c 255 - 260 c 100 sec. max. 10 - 30 sec. time temperature 10.700.10 8.400.10 3.10.10 5.080.10 1.000.10 17.000.20 figuref7.frelativeflightfoutputfvs.fjunctionftemperature. 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 -50 -25 0 25 50 75 100 125 junction temperature, t j - c relative light output (normalized at 25c) warm white cool white 0 100 200 300 400 500 600 700 800 0 20 40 60 80 100 120 140 t a - ambient temperature - c max allowable dc current - ma 0 100 200 300 400 500 600 700 800 0 20 40 60 80 100 120 140 t ms - metal slug temperature - c max allowable dc current - ma r? j-ms = 10c/w r? j-a = 30c/w r? j-a = 20c/w r? j-a = 25c/w
7 colorfbinfselectionsf[x 3 ] individual reel will contain parts from one full bin only. coolfwhite o fullfdistribution a a only b b only c c only d d only e e only f f only g g only h h only l a and g only m b and h only n a and c only p b and d only q e and c only r f and d only s g and h only u e and f only w c and d only z a and b only 1 a, b, c and d only 2 g, h, a and b only 4 c, d, e and f only warmfwhite o fullfdistribution a a only b b only c c only d d only e e only f f only n a and c only p b and d only q e and c only r f and d only u e and f only w c and d only z a and b only v d and e only 1 a, b, c and d only 4 c, d, e and f only fluxfbinflimitf[x 1 fx 2 ] bin luminousffluxf(lm)fatfi f f=f700ma min. max. l 73.0 95.0 m 95.0 124.0 n 124.0 161.0 tolerance for each bin limits is 10%. optionfselectionfdetails asmt-mxxxfCfnfx 1 fx 2 fx 3 fx 4 f x 1 C minimum flux bin x 2 C maximum flux bin x 3 C color bin selection x 4 C packaging option
8 colorfbinflimit cool f colorflimits f white f (chromaticityfcoordinates) bin a x 0.367 0.362 0.329 0.329 y 0.400 0.372 0.345 0.369 bin b x 0.362 0.356 0.329 0.329 y 0.372 0.330 0.302 0.345 bin c x 0.329 0.329 0.305 0.301 y 0.369 0.345 0.322 0.342 bin d x 0.329 0.329 0.311 0.305 y 0.345 0.302 0.285 0.322 bin e x 0.303 0.307 0.283 0.274 y 0.333 0.311 0.284 0.301 bin f x 0.307 0.311 0.290 0.283 y 0.311 0.285 0.265 0.284 bin g x 0.388 0.379 0.362 0.367 y 0.417 0.383 0.372 0.400 bin h x 0.379 0.369 0.356 0.362 y 0.383 0.343 0.330 0.372 tolerance: 0.01 warm f colorflimits f white f (chromaticityfcoordinates) bin a x 0.452 0.488 0.470 0.438 y 0.434 0.447 0.414 0.403 bin b x 0.438 0.470 0.452 0.424 y 0.403 0.414 0.384 0.376 bin c x 0.407 0.418 0.452 0.438 y 0.393 0.422 0.434 0.403 bin d x 0.395 0.407 0.438 0.424 y 0.362 0.393 0.403 0.376 bin e x 0.381 0.387 0.418 0.407 y 0.377 0.404 0.422 0.393 bin f x 0.373 0.381 0.407 0.395 y 0.349 0.377 0.393 0.362 tolerance: 0.01 0 . 2 4 0 . 2 6 0 . 2 8 0 . 3 0 0 . 3 2 0 . 3 4 0 . 3 6 0 . 3 8 0 . 4 0 0 . 4 2 0 . 4 4 0 . 2 4 0 . 2 6 0 . 2 8 0 . 3 0 0 . 3 2 0 . 3 4 0 . 3 6 0 . 3 8 0 . 4 0 0 . 4 2 0 . 4 4 x - c o o r d i n a t e y - c o o r d i n a t e y - c o o r d i n a t e b c e d a f 7 k 1 0 k 4 . 0 k g h 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 x - coordinate b c e d a f 3.0k 3.5k 4.0k 2.6k 5 . 6 k 4 . 5 k bl a c k bo d y c u rv e bl a c k bo d y c u rv e packagingfoptionf[x 4 ] selection option 0 tube 1 tape and reel example asmt-mw20-nlnz0 asmt-mw20-nxxxx C cool white, electrically non-isolated heat sink, non-difused x 1 = l C minimum flux bin l x 2 = n C maximum flux bin n x 3 = z C color bin a and b only x 4 = 0 C tube option figuref13.fcolorfbinsf(warmfwhite). figuref12.fcolorfbinsf(coolfwhite).
9 dim value a o 8.800.10 b o 16.450.10 k o 3.600.1 e 1.750.10 f 11.500.10 w 24.00.10 p 16.00.10 q'ty/reel 250 units all dimensions in millimeters. tapef&freelfCfoptionf1 packingftubefCfoptionf0 figuref14.ftubefdimensions figuref15.fcarrierftapefdimensions 535.00 1.00 5.45 5.80 4.65 5.50 10.10 37.00 8.30 top view side view a a b a o b p sec tion b sec tion a k o w f e bo 2.5
10 reelfdimension r10.00 60.0o ? 268.00 ? 330.00 1.00 ? 99.50 1.00 2.30 2.30 24.0 +1.00 ?0.00 ? 13.50 0.50 2.50 0.50 r10.50 0.50 120.0o end minimum of 160 mm of empty component pockets sealed with cover tape. mounted with components minimum of 390 mm of empty component pockets sealed with cover tape. start *not e: t ape & r eel p ack ag ing only applicable as per this da tasheet only . figuref16.fcarrierftapefleaderfandftrailerfdimensions. figuref17. freelfdimensions.
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2009 avago technologies. all rights reserved. av02-1452en - october 8, 2009 handlingfprecaution the encapsulation material of the product is made of silicone for better reliability of the product. as silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. these might damage the product and cause premature failure. during assembly or handling, the unit should be held on the body only. please refer to avago application note an 5288 for detail infor - mation. moisturefsensitivity this product is qualifed as moisture sensitive level 4 per jedec j-std-020. precautions when handling this moisture sensitive product is important to ensure the reliability of the product. do refer to avago application note an5305 handling of moisture sensitive surface mount devices for details. a. storage before use C unopen moisture barrier bag (mbb) can be stored at <40c/90%rh for 12 months. if the actual shelf life has exceeded 12 months and the humidity indicator card (hic) indicates that baking is not required, then it is safe to refow the leds per the original msl rating. C it is not recommended to open the mbb prior to assembly (e.g. for iqc). b. control after opening the mbb C the humidity indicator card (hic) shall be read immediately upon opening of mbb. C the leds must be kept at <30c/60%rh at all time and all high temperature related process including soldering, curing or rework need to be completed within 72 hours. c. control for unfnished reel C for any unused leds, they need to be stored in sealed mbb with desiccant or desiccator at <5%rh. d. control of assembly boards C if the pcb soldered with the leds is to be subjected to other high temperature processes, the pcb need to be stored in sealed mbb with desiccant or desiccator at <5%rh to ensure no leds have exceeded their foor life of 72 hours. e. baking is required if C hic 10% indicator is not blue and 5% indicator is pink. C the leds are exposed to condition of >30c/60% rh at any time. C the leds foor life exceeded 72hrs. recommended baking condition: 605c for 20hrs. disclaimer: avagos products and software are not specifcally designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use.

▲Up To Search▲

Price & Availability of ASMT-MYE0-NMNV0

	To Download ASMT-MYE0-NMNV0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .