? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com 21 e-mail: sales@glenair.com cb series connectors cb series ?pogopin? connectors all dimensions in millimeters (mm). information subject to change without notice. black zinc plated aluminum alloy adapter ts all cb plugs and receptacles with m14 x 1 threads. attach adapter to connector and ll with potting compound for wire protection and waterproo ng. attach shield and cable strength members to adapter with glenair tool 600-061 using 3mm stainless steel band-it ? straps. maximum weight 7 grams. banding adapter for shielding and overmolding 18.3 max 15.6 max 13.9 max 30.2 max 11.9 1.5 1.5 band-it ? shield termination system fast, cost-effective shield termination. attach cable shields to series 80 connectors or backshells with band-it ? stainless steel straps. the band-it ? system offers fast termination and the exibility to handle a wide range of parts with just one band size. approved for aerospace and defense, these straps have successfully passed rigorous shock, vibration and environmental testing. 1 micro band installation tool. use with 3.05 mm wide bands. 172 mm length, 0.6 kg. 1 2 micro band, 3.05 mm wide. available at or pre-coiled. stainless steel. 2 figure description part number 1 micro band installation tool 600-061 description part number banding adapter cbbsbi-t figure length part number accommodates maximum diameter in. flat pre-coiled 2 8.125 206.38 600-057 600-057-1 22.3 contact glenair or visit our website (glenair.com) to view our complete line of band-it ? products, including pneumatic tools for high volume production and calibration kits. 4.95 ref 3.05 ref tail length indicator mark 206.4 0.8
? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com 22 e-mail: sales@glenair.com cb series connectors cb series ?pogopin? connectors all dimensions in millimeters (mm). information subject to change without notice. rev. 05-apr-2007 heat shrinkable boots straight boot dimensions right angle boot dimensions 1 straight boot, adhesive-lined. fits all cb series pogopin connectors. style 1 style 2 2 right angle boot for 90 cable exit. fits all cb series pogopin connectors. figure configuration fluid resistant elastomer low-smoke zero halogen 1 straight 809s060-3 809s060-3h 2 right angle 809a060-3 809a060-3h protect your cable harness with semi-rigid heat-shrinkable boots. these easy-to-use boots provide excellent electrical, mechanical and environmental protection. made from ame-retardant elastomeric material, these adhesive-lined boots are resistant to high temperature and chemicals. heating the boot causes the boot to shrink onto the connector and cable . an adhesive lining bonds the boot to the connector and cable and lls small gaps for a complete seal. choose straight cable exit or right angle exit. ?23.5 min ? 5.6 max 1.5 ref before heat shrinking after heat shrinking ?10.4 max 38.1 ref ? 5.6 max 1.5 ref before heat shrinking after heat shrinking ?10.4 max ?23.5 min ?20.3 ref ?22.9 ref specifications standard material fluid resistant cross- linked elastomer per vg95343 part 6 low toxicity material fluid resistant cross- linked elastomer per navsea 5617649 adhesive polyamide hot melt min. shrink temperature +135c installation temperature +175c. temperature range -55c to +105c solvent resistance saline ? excellent hydraulic fluid ? very good lubricating oil ? very good aviation fuel ? very good gasoline ? very good diesel ? fair de-icing fluid ? excellent flammability self-extinguishing dielectric strength 480 v/mil
? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com 23 e-mail: sales@glenair.com cb series connectors cb series ?pogopin? connectors all dimensions in millimeters (mm). information subject to change without notice. rev. 05-apr-2007 pg thread adapter jam nut tightening tool pg thread adapters t all cb series connectors with m14 x 1 accessory threads. these adapters accept all standard pg 7 liquid tight cordgrips. nickel-plated steel tightening tool ts jam nut receptacles. fits 3 / 8 inch drive torque wrench. 18.5mm diameter, 25.4 mm length, 23 grams. recommended installation torque: 6-7 n-m. pg adapter pg adapter with flexible cordgrip pg adapter with flexible cordgrip, with cb plug and jacketed cable pg a d t it h fl ib l 1 pg 7 adapter ts all cb series connectors with m14 x 1 accessory thread. aluminum alloy with black zinc plating. maximum weight 6 grams. 2 pg 7 adapter with liquid tight exible cordgrip. adapter ts all cb series connectors with m14 x 1 accessory thread. aluminum alloy with black zinc plating. cordgrip is 6/6 nylon with thermoplastic elastomeric sealing gland. fits cable diameter 3.5mm to 7mm supplied with nitrile o-ring for adaper-to-cordgrip seal. maximum weight 15 grams. 18.3 max m14. x 1 fem thd 26.0 max pg 7 fem thd 18.3 max 19.1 max m14. x 1 fem thd 86.4 max figure configuration part number 1 adapter only CBBSPG7-T 2 adapter and cordgrip cbbspg7cd-t part number 600-146-04 style 1 style 2
? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com 24 e-mail: sales@glenair.com cb series connectors cb series ?pogopin? connectors all dimensions in millimeters (mm). information subject to change without notice. shielded backshell with flexible rubber bushing black zinc plated aluminum alloy backshell ts cb series connectors with m14 x 1 threads. black nitrile bushing provides exible cable strain relief and cable sealing. cut tapered bushing to t varying cable diameters. supplied unassembled with two o-rings and aluminum alloy ground ring. maximum weight 15 grams. part number cbbs-e1 ? 18.0 43 max. 90 max. ? 7 ? 6 ? 5 dummy receptacle for cb series plugs attach dummy receptacle to panel or chassis with m4 screw (not supplied). aluminum alloy, black zinc plated. resilient gasket holds plug in place. maximum weight 7 grams. part number cbcap-z6 gasket 23.0 max. 4.2 +0.2 -0 15.7 max. front adapter rear adapter o-ring ground ring rubber bushing washer ? connector shown for reference only.
? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com 25 e-mail: sales@glenair.com cb series connectors cb series ?pogopin? connectors all dimensions in millimeters (mm). information subject to change without notice. protective cover for cb series plugs watertight aluminum alloy cover protects cb series plugs from damage when unmated. black zinc plated. o-ring holds cover in place. supplied with nylon rope, with ring terminal or loop. attach with ring terminal, or attach to cable with loop. maximum weight 7 grams. rubber protective cover for cb series receptacles black nitrile rubber cover ts all cb series receptacles including shrouded versions. tight friction t prevents water ingress to unmated connector. supplied with nylon rope, ring terminal and ferrule. terminal and ferrule are supplied unassembled. attach to panel with ring terminal, or attach to cable with crimp ferrule. use standard crimp tools for installation. maximum weight 5 grams. 15.6 o 19.50,5 o 13 o 10.5 +0,1 0 o 14.50.5 60.5 11.5 23.0 min 3.5 min ? 3 + 0 - 0.5 crimp ferrule for cable attachment (supplied loose) ring terminal for panel attachment (supplied loose) part number vg96934z4 figure configuration part number 1 25 mm loop cba10z6 2 ring terminal cba10z3 1 2 loop for cable attachment 23.0 max. 80 15.7 max. ? 3 ? 25 ring terminal for panel attachment 100 + 0 - 0.5 + 5 - 0 + 10 - 0
|
