silicon avalanche diodes 298 www.littelfuse.com features ? rohs compliant ? 5.0 to 220 volts ? glass passivated chip junction ? uni-directional and bi-directional ? 5000w peak pulse power capability on 10/1000? waveform ? excellent clamping capability ? repetition rate (duty cycle): 0.05% ? low incremental surge resistance fast response time: typically less than 1.0ps from 0 volts to bv typical ir less than 1? for v br >=10v high temperature soldering guaranteed: 265?c/10 seconds/.375"(9.5mm) lead length, 5lbs., (2.3kg) tension agency approvals: recognized under the components program of underwriters laboratories. agency file number: e128662 5kp c a voltage bi-directional 5% voltage tolerance packaging option b = bulk (500 pcs) t = tape and reeled (800 pcs) ordering information 5kp series 5000 watt axial leaded transient voltage suppressor maximum ratings and characteristics @25?c ambient temperature (unless otherwise noted) unit watts amps watts amps ? notes: 1. non-repetitive current pulse, per fig.3 and derated above t a = 25?c per fig.2 2. mounted on copper pad area of 0.8x0.8"(20x20mm) per fig.5. 3. 8.3 ms single half sine-wave, or equivalent square wave, duty cycle= 4 pulses per minutes maximum. symbol p ppm i ppm p m (av) i fsm t j, t stg value min 5000 see table 1 8 400 -55 to +175 rating peak pulse power dissipation on 10/1000? waveform(note 1, fig. 1) peak pulse current of on 10/1000? waveform (note 1, fig. 3) steady state power dissipation at t l =75?c, lead lengths .375", (9.5mm)(note 2) peak forward surge current, 8.3ms single half sine-wave superimposed on rated load, (jedec method) (note 3) operating junction and storage temperature range the 5kp series is designed specifically to protect sensitive electronics equipment from voltage transients induced by lightning and othertransient voltage events. these devices are ideal for the protection of i/o interfaces, vcc bus and other vulnerable circuits used in automotive, industrial and consumer electronic applications. mechanical specifications: weight: 0.07 ounce, 2.1 gram case: molded plastic over glass passivated junction mounting position: any polarity: color band denotes positive end (cathode) except bipolar terminal: plated axial leads, solderable per mil-std-750, method 2026 rohs
silicon avalanche diodes 299 www.littelfuse.com 6 silicon diode arrays 5000 watt axial leaded transient voltage suppressor part numbers breakdown voltage v br (volts) @ i t maximum reverse leakage i r @ v r (?) maximum clamping voltage v c @ i pp (volts) maximum peak pulse current i pp (a) electrical specification @ tamb 25? 5kp5.0a 5kp5.0ca 5.0 6.40 7.00 50 9.2 544.0 5000 5kp6.0a 5kp6.0ca 6.0 6.67 7.37 50 10.3 486.0 5000 5kp6.5a 5kp6.5ca 6.5 7.22 7.98 50 11.2 447.0 2000 5kp7.0a 5kp7.0ca 7.0 7.78 8.60 50 12.0 417.0 1000 5kp7.5a 5kp7.5ca 7.5 8.33 9.21 5 12.9 388.0 250 5kp8.0a 5kp8.0ca 8.0 8.89 9.83 5 13.6 368.0 150 5kp8.5a 5kp8.5ca 8.5 9.44 10.40 5 14.4 348.0 50 5kp9.0a 5kp9.0ca 9.0 10.00 11.10 5 15.4 325.0 20 5kp10a 5kp10ca 10.0 11.10 12.30 5 17.0 295.0 15 5kp11a 5kp11ca 11.0 12.20 13.50 5 18.2 275.0 10 5kp12a 5kp12ca 12.0 13.30 14.70 5 19.9 252.0 10 5kp13a 5kp13ca 13.0 14.40 15.90 5 21.5 233.0 10 5kp14a 5kp14ca 14.0 15.60 17.20 5 23.2 216.0 10 5kp15a 5kp15ca 15.0 16.70 18.50 5 24.4 205.0 10 5kp16a 5kp16ca 16.0 17.80 19.70 5 26.0 193.0 10 5kp17a 5kp17ca 17.0 18.90 20.90 5 27.6 181.0 10 5kp18a 5kp18ca 18.0 20.00 22.10 5 29.2 172.0 10 5kp20a 5kp20ca 20.0 22.20 24.50 5 32.4 154.0 10 5kp22a 5kp22ca 22.0 24.00 26.90 5 35.5 141.0 10 5kp24a 5kp24ca 24.0 26.70 29.50 5 38.9 129.0 10 5kp26a 5kp26ca 26.0 28.90 31.90 5 42.1 119.0 10 5kp28a 5kp28ca 28.0 31.10 34.40 5 45.4 110.0 10 5kp30a 5kp30ca 30.0 33.30 36.80 5 48.4 103.0 10 5kp33a 5kp33ca 33.0 36.70 40.60 5 53.3 93.9 10 5kp36a 5kp36ca 36.0 40.00 44.20 5 58.1 86.1 10 5kp40a 5KP40CA 40.0 44.40 49.10 5 64.5 77.6 10 5kp43a 5kp43ca 43.0 47.80 52.80 5 69.4 72.1 10 5kp45a 5kp45ca 45.0 50.00 55.30 5 72.7 68.8 10 5kp48a 5kp48ca 48.0 53.30 58.90 5 77.4 64.7 10 5kp51a 5kp51ca 51.0 56.70 62.70 5 82.4 60.7 10 5kp54a 5kp54ca 54.0 60.00 66.30 5 87.1 57.5 10 5kp58a 5kp58ca 58.0 64.40 71.20 5 93.6 53.5 10 5kp60a 5kp60ca 60.0 66.70 73.70 5 96.8 51.7 10 5kp64a 5kp64ca 64.0 71.10 78.60 5 103.0 48.6 10 5kp70a 5kp70ca 70.0 77.80 86.00 5 113.0 44.3 10 5kp75a 5kp75ca 75.0 83.30 92.10 5 121.0 41.4 10 5kp78a 5kp78ca 78.0 86.70 95.80 5 126.0 39.7 10 5kp85a 5kp85ca 85.0 94.40 104.00 5 137.0 36.5 10 5kp90a 5kp90ca 90.0 100.00 111.00 5 146.0 34.3 10 5kp100a 5kp100ca 100.0 110.00 123.00 5 162.0 30.9 10 5kp110a 5kp110ca 110.0 122.00 135.00 5 177.0 28.3 10 5kp120a 5kp120ca 120.0 133.00 147.00 5 193.0 26.0 10 5kp130a 5kp130ca 130.0 144.00 159.00 5 209.0 24.0 10 5kp150a 5kp150ca 150.0 167.00 185.00 5 243.0 20.6 10 5kp160a 5kp160ca 160.0 178.00 197.00 5 259.0 19.3 10 5kp170a 5kp170ca 170.0 189.00 209.00 5 275.0 18.2 10 5kp180a 5kp180ca 180.0 200.00 221.00 5 292.0 17.6 10 5kp190a 5kp190ca 190.0 211.00 233.00 5 310.0 9.7 10 5kp200a 5kp200ca 200.0 222.00 246.00 5 329.2 9.1 10 5kp210a 5kp210ca 210.0 233.00 258.00 5 349.5 8.6 10 5kp220a 5kp220ca 220.0 244.00 270.00 5 371.1 8.1 10 reverse stand off voltage v r (volts) test current i t (ma) for bidirectional type having vrwm of 30 volts and less, the ir limit is double. for parts without a , the vbr is + 10% min max uni-polar bi-polar 5kp series rohs
silicon avalanche diodes 300 www.littelfuse.com 5000 watt axial leaded transient voltage suppressor fig. 1 peak pulse power rating curve fig. 2 pulse derating curve fig. 3 pulse waveform fig. 4- typical junction capacitance fig. 6- maximum non-repetitive forward surge current i fsm , peak forward surge current (a) 100 150 200 250 300 350 400 100 10 1 number of cycles at 60hz fig. 5 steady state power derating curve i ppm - peak pulse current, % i rsm 0 0 50 100 150 1.0 2.0 3.0 4.0 t r =10sec peak value i ppm half value i ppm 2 t j =25 ? c pulse width(t d ) is defined as the point where the peak current decays to 50% of i ppm 10/1000sec. waveform as defined by r.e.a t d t-time (ms) t l - lead temperature ( ? c) steady state power dissipation (w) 0 0 25 2 50 75 6 4 100 8 125 150 175 200 l=0.375(9.5mm) lead lengths 0.8x0.8x.040'' (20x20mm) copper heat sinks 60hz resistive or inductive load t a - ambient temperature ( ? c) peak pulse power (kw) 0 0 25 25 50 50 75 75 100 100 125 150 175 200 c j -junction capacitance (pf) 1 1000 100 10000 100000 10 100 200 v br , breakdown voltage t j =25 ? c f=1mh 2 vsig=50mvp-p measured at stand-off voltage 8.3ms single half sine-wave p ppm - peak pulse power (kw) 0.1s 1.0s 10s 100s 1.0ms 10ms 0.1 1 10 100 t d - pulse width (sec.) non-repetitive pulse waveform shown in fig.3 t a =25 ? c ratings and characteristic curves t a =25?c unless otherwise noted 5kp series rohs
silicon avalanche diodes 301 www.littelfuse.com 6 silicon diode arrays package outline dimensions 0.360 (9.1) 0.340 (8.6) dia. 1.0 (25.4) min. 0.360 (9.1) 0.340 (8.6) 1.0 (25.4) min. 0.052 (1.32) 0.048 (1.22) dia. case style p600 dimensions in inches and (millimeters) 5kp series rohs 5000 watt axial leaded transient voltage suppressor
|
