original creation date: 10/05/95 last update date: 05/14/98 last major revision date: 03/04/98 mncd4014bm-x rev 1a0 microcircuit data sheet 8-stage static shift register general description the cd4014bm is an 8-stage parallel input/serial output shift register. a parallel/serial control input enables individual jam inputs to each of 8 stages. q outputs are available from the sixth, seventh and eighth stages. all outputs have equal source and sink current capabilities and conform to standard "b" series output drive. when the parallel/serial control input is in the logical "0" state, data is serially shifted into the register synchronously with the positive transition of the clock. when the parallel/serial control input is in the logical "1" state, data is jammed into each stage of the register synchronously, with the positive transition of the clock. ns part numbers cd4014bmj/883 cd4014bmw/883 industry part number cd4014bm prime die cd4014bm processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1
microcircuit data sheet mncd4014bm-x rev 1a0 features - wide supply voltage range 3.0v to 15v - high noise immunity 0.45vdd (typ.) - low power ttl fan out of 2 driving 74l compatibility or 1 driving 74ls - 5v-10v-15v parametric ratings - symmetrical output characteristics - maximum input leakage: 1ua at 15v over full temperature range applications - automotive - data terminals - instrumentation - medical electronics - alarm system - industrial electronics - remote metering - computers 2
microcircuit data sheet mncd4014bm-x rev 1a0 (absolute maximum ratings) (note 1, 2) supply voltage (vdd) -0.5v to +18v input voltage (vin) -0.5v to vdd +0.5v storage temperature range (ts) -65 c to +150 c power dissipation (pd) 700mw dual-in-line 500mw small outline lead temperature (tl) 260 c (soldering, 10 seconds) note 1: "absolute maximum ratings" are those values beyond which the safety of the device cannot be guaranteed. except for "operating temperature range" they are not meant to imply that the devices should be operated at these limits. the table of "electrical characteristics" provides conidtions for actual device operation. note 2: vss = 0v unless otherwise specified. recommended operating conditions (note 1) supply voltage (vdd) 3.0v to 15v input voltage (vin) 0 to vdd operating temperature range (ta) -55 c to +125 c cd4014bm note 1: vss = 0v unless otherwise specified. 3
mncd4014bm-x rev 1a0 microcircuit data sheet electrical characteristics dc parameters symbol parameter conditions notes pin- name min max unit sub- groups iil input current vdd = 15v, vil= 0v -100 na 1, 3 -1000 na 2 iih input current vdd = 15v, vih= 15v 100 na 1, 3 1000 na 2 idd quiescent current vdd = 5v, vin = 5v 5 ua 1, 3 150 ua 2 vdd = 10v, vin = 10v 10 ua 1, 3 300 ua 2 vdd = 15v, vin = 15v 20 ua 1, 3 600 ua 2 ioh logical "1" output current vdd = 5v, vout = 4.6v -510 ua 1 -360 ua 2 -640 ua 3 vdd = 10v, vout = 9.5v -1.3 ma 1 -0.9 ma 2 -1.6 ma 3 vdd = 15v, vout = 13.5v -3.4 ma 1 -2.4 ma 2 -4.2 ma 3 iol logical "0" output current vdd = 5v, vout = 0.4v 510 ua 1 360 ua 2 640 ua 3 vdd = 10v, vout = 0.5v 1.3 ma 1 0.9 ma 2 1.6 ma 3 vdd = 15v, vout = 1.5v 3.4 ma 1 2.4 ma 2 4.2 ma 3 4
mncd4014bm-x rev 1a0 microcircuit data sheet electrical characteristics dc parameters(continued) symbol parameter conditions notes pin- name min max unit sub- groups voh logical "1" output voltage vdd = 5v, iout < 1ua 4.95 v 1, 2, 3 vdd = 10v, iout < 1ua 9.95 v 1, 2, 3 vdd = 15v, iout < 1ua 14.95 v 1, 2, 3 vol logical "0" output voltage vdd = 5v, iout < 1ua 0.05 v 1, 2, 3 vdd = 10v, iout < 1ua 0.05 v 1, 2, 3 vdd = 15v, iout < 1ua 0.05 v 1, 2, 3 vih logical "1" input voltage vdd = 5v, vih = 3.5v, vil = 1.5v, iout < 1ua 4.5 v 1, 2, 3 vdd = 10v, vih = 7v, vil = 3v, iout < 1ua 9 v 1, 2, 3 vdd = 15v, vih = 11v, vil = 4v, iout < 1ua 13.5 v 1, 2, 3 vil logical "0" input voltage vdd = 5v, vih = 3.5v, vil = 1.5v, iout < 1ua 0.5 v 1, 2, 3 vdd = 10v, vih = 7v, vil = 3v, iout < 1ua 1 v 1, 2, 3 vdd = 15v, vih = 11v, vil = 4v, iout < 1ua 1.5 v 1, 2, 3 ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl = 50pf, rl = 200k ohms, tr, tf = 20ns tphl propagation delay time vdd = 5v 2 320 ns 9 2 450 ns 10 2 255 ns 11 vdd = 10v 1 160 ns 9 1 225 ns 10 1 130 ns 11 vdd = 15v 1 120 ns 9 1 170 ns 10 195ns11 5
mncd4014bm-x rev 1a0 microcircuit data sheet electrical characteristics ac parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl = 50pf, rl = 200k ohms, tr, tf = 20ns symbol parameter conditions notes pin- name min max unit sub- groups tplh propagation delay time vdd = 5v 2 320 ns 9 2 450 ns 10 2 255 ns 11 vdd = 10v 1 160 ns 9 1 225 ns 10 1 130 ns 11 vdd = 15v 1 120 ns 9 1 170 ns 10 195ns11 tthl transition time vdd = 5v 200 ns 9 vdd = 10v 1 100 ns 9 vdd = 15v 1 80 ns 9 ttlh transition time vdd = 5v 200 ns 9 vdd = 10v 1 100 ns 9 vdd = 15v 1 80 ns 9 fcl maximum clock input frequency vdd = 5v 4 643 785 ns 9 tw minimum clock pulse width vdd = 5v 1 180 ns 9 vdd = 10v 1 80 ns 9 vdd = 15v 1 50 ns 9 ts minimum setup time serial input th > 200ns vdd = 5v 1 120 ns 9 ts minimum setup time serial input th > 200ns vdd = 10v 1 80 ns 9 ts minimum setup time serial input th > 200ns vdd = 15v 1 60 ns 9 ts parallel input th > 200ns vdd = 5v 1 160 ns 9 ts parallel input th > 200ns vdd = 10v 1 80 ns 9 ts parallel input th > 200ns vdd = 15v 1 60 ns 9 6
mncd4014bm-x rev 1a0 microcircuit data sheet electrical characteristics ac parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl = 50pf, rl = 200k ohms, tr, tf = 20ns symbol parameter conditions notes pin- name min max unit sub- groups ts parallel/serial control th > 200ns vdd = 5v 1 200 ns 9 ts parallel/serial control th > 200ns vdd = 10v 1 100 ns 9 ts parallel/serial control th > 200ns vdd = 15v 1 80 ns 9 continuity tests 3 9, 10, 11 note 1: guaranteed parameter not tested. note 2: tested at 25 c; guaranteed but not tested at +125 c and -55 c. note 3: engineering setup tests, no limits. note 4: limit = approximately 2.8mhz. 7
microcircuit data sheet mncd4014bm-x rev 1a0 revision history rev ecn # rel date originator changes 1a0 m0000524 05/14/98 linda collins converted from rets4014bx rev. 7c to mds mncd4014bm-x rev. 1a0. deleted the rad hard stress tests and the drift values. added iih. 8
|
