2SC6098 no. a0413-1/4 applications ? dc / dc converter, relay drivers, lamp drivers, motor drivers, inverter. features ? adoption of fbet, mbit process. ? high current capacitance. ? low collector-to-emitter saturation voltage. ? high-speed switching. ? high allowable power dissipation. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo 120 v collector-to-emitter voltage v ces 120 v collector-to-emitter voltage v ceo 80 v emitter-to-base voltage v ebo 6.5 v collector current i c 2.5 a collector current (pulse) i cp 4a base current i b 500 ma collector dissipation p c 0.8 w tc=25 c15w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =70v, i e =0a 1 m a emitter cutoff current i ebo v eb =4v, i c =0a 1 m a dc current gain h fe v ce =5v, i c =100ma 300 600 continued on next page. ordering number : ena0413 53006ea ms im tb-00002377 2SC6098 npn epitaxial planar silicon transistor high-voltage switching applications sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein.
2SC6098 no. a0413-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit gain-bandwidth product f t v ce =10v, i c =500ma 350 mhz output capacitance cob v cb =10v, f=1mhz 14 pf collector-to-emitter saturation voltage v ce (sat)1 i c =1a, i b =50ma 110 165 mv v ce (sat)2 i c =1a, i b =100ma 100 150 mv base-to-emitter saturation voltage v be (sat) i c =1a, i b =100ma 0.9 1.2 v collector-to-base breakdown voltage v (br)cbo i c =10 m a, i e =0a 120 v collector-to-emitter breakdown voltage v (br)ces i c =100 m a, r be =0 w 120 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 80 v emitter-to-base breakdown voltage v (br)ebo i e =10 m a, i c =0a 6.5 v turn-on time t on see specified test circuit. 40 ns storage time t stg see specified test circuit. 920 ns fall time t f see specified test circuit. 32 ns package dimensions package dimensions unit : mm unit : mm 7518-003 7003-003 switching time test circuit 6.5 5.0 2.3 0.5 12 4 3 0.85 0.7 1.2 0.6 0.5 2.3 2.3 7.0 7.5 1.6 0.8 5.5 1.5 1 : base 2 : collector 3 : emitter 4 : collector sanyo : tp 6.5 5.0 2.3 0.5 12 4 3 0.85 0.6 0.5 1.2 1.2 2.3 2.3 7.0 2.5 5.5 1.5 0.8 0 to 0.2 1 : base 2 : collector 3 : emitter 4 : collector sanyo : tp-fa v r 10 r b v cc =40v 10i b1 = --10i b2 =i c =0.5a v be = --5v + + 50 w input output r l 470 m f 100 m f pw=20 m s i b1 d.c. 1% i b2
2SC6098 no. a0413-3/4 i c -- v ce collector current, i c -- a collector-to-emitter voltage, v ce -- v i c -- v be collector current, i c -- a base-to-emitter voltage, v be -- v v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a cob -- v cb v ce (sat) -- i c v be (sat) -- i c collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v h fe -- i c f t -- i c collector current, i c -- a dc current gain, h fe gain-bandwidth product, f t -- mhz collector current, i c -- a ta=75 c --25 c it11064 25 c 0.01 3 25 0.1 73 257 3 25 1.0 0.1 0.01 5 3 2 7 5 3 7 2 2.0 1.6 1.2 0.8 0.4 0 2.5 2.0 1.5 0.5 1.0 0 0.2 0 0.4 0.6 0.8 1.0 it11058 5ma 10ma 20ma 40ma 60ma 80ma 100ma i b =0ma 2ma 1ma ta=75 c 25 c --25 c v ce =5v 0 0.2 0.4 0.6 0.8 1.2 1.0 it11059 5 5 3 3 2 100 10 7 7 it11062 ta=75 c --25 c it11063 i c / i b =10 25 c 3 1.0 2 3 ta= --25 c 25 c 75 c 2 7 5 i c / i b =10 it11065 ta=75 c 25 c --25 c 7 100 1000 7 5 3 3 2 5 0.01 3 25 0.1 73 257 23 1.0 5 0.01 3 25 0.1 73 257 23 1.0 7 100 10 1000 5 3 2 7 5 3 2 0.01 3 25 0.1 73 257 3 25 1.0 0.1 3 25 1.0 73 257 23 10 57 100 0.1 0.01 5 3 2 7 5 3 7 5 3 2 0.01 3 25 0.1 73 257 23 1.0 5 v ce =5v it11060 it11061 i c / i b =20 v ce =10v f=1mhz
2SC6098 no. a0413-4/4 ps specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of may, 2006. specifications and information herein are subject to change without notice. 17.5 0 15.0 12.5 10.0 7.50 5.00 2.50 20 060 40 80 100 140 120 160 it11069 0 0.9 0.7 0.8 0.6 0.5 0.4 0.3 0.2 0.1 20 060 40 80 100 140 120 160 it11068 1.0 0.01 7 5 3 2 7 5 3 2 0.1 7 5 3 2 1.0 0.1 10 100 25 37 25 37 25 37 it11066 100ms 10ms <10 m s 1ms 500 m s 100 m s dc operation i cp =4a i c =2.5a 1.0 0.01 7 5 3 2 7 5 3 2 0.1 7 5 3 2 1.0 0.1 10 100 25 37 25 37 25 37 it11067 100ms 10ms <10 m s 1ms 500 m s 100 m s dc operation i cp =4a i c =2.5a a s o collector current, i c -- a collector-to-emitter voltage, v ce -- v collector dissipation, p c -- w p c -- ta collector dissipation, p c -- w p c -- tc ambient temperature, ta -- c case temperature, tc -- c ta=25 c single pulse a s o collector current, i c -- a collector-to-emitter voltage, v ce -- v tc=25 c single pulse
|