illuminated switches standard size snap-in pushbuttons lb series lb how to order: 1 2 3 4 sales@greatecs.com www.greatecs.com 1 LB15SKW01-12-CJ 5 1 2 5 6 s c r k g poles: spdt dpdt circuits: on-(on) on-on (alternate action with latchdown) shapes: square round rectangular housing: black gray w01 g01 contacts & terminals: silver contacts rated 3a @ 125/250v ac solder lug / quick connect gold contacts rated 0.4va @ 28v ac/dc solder lug / quick connect lamps: caps types & colors: 1 2 3 5 6 illuminated switches 6 7 4 7 solid cap: lens/filter colors (only for type 1 lamp) white/clear red/clear yellow/clear green/clear blue/clear type1: incandescent lamp used with solid cap 5-volt 12-volt led cap: lens/diffuser colors (only for type 4 lamp) clear/white type 4: super bright led used with led cap white green blue led cap: lens/diffuser colors (only for type 3 lamp) clear/white clear/red clear/amber clear/green type 3: bright led used with led cap no resistor 5-volt 12-volt 24-volt red amber green 110-volt neon 5-volt incandescent 12-volt incandescent insert cap: lens/filter colors (only for type 2 lamp) clear/white clear/red clear/yellow clear/green clear/blue * jf & jg not suitable with neon. * * type 5: led in spot illuminated cap red single color amber single color green single color red/green bicolor spot illuminated cap colors (only for type 5 lamp) black white red green available in square and round only. 05 01 12 05 12 5c 5d 5f 6b 6f 6g 1c 1d 1f cf a b c f jb jb jc jd jf jb jc jf je jg bj cj ej fj gj type2: incandescent or neon used w / insert cap 5c24 5c12 5c05 5d24 5d12 5d05 5f24 5f12 5f05 square rectangular round single pole models do not have terminals 4, 5, & 6. l (-) l (+) 6 3 25 4 1 nc no com (15.8) s q .622 (2.8) typ .110 (5.08) typ .200 (1.8) .071 (3.2) .126 (21.5) .846 (7.5) .295 (2.54) typ .100 (0.5) typ .020 (1.2) x (2.0) typ .047 x .079 (1.0) .039 latchdown position (13.2) sq .520 (17.8) sq .701 (19.0) dia .748 (23.7) dia .933 (1.2) x (2.0) typ .047 x .079 (0.5) typ .020 (2.54) typ .100 (7.5) .295 (21.5) .846 (3.2) .126 (1.8) .071 (1.0) .039 latchdown position (21.7) dia .854 l (+) 3 6 2 5 4 1 l (-) nc no com (15.8) sq .622 (2.8) typ .110 (5.08) typ .200 (17.8) .701 (13.2) .520 (19.4) .764 (24.0) .945 (3.2) .126 (22.5) .886 (7.5) .295 (2.54) typ .100 (0.5) typ .020 (1.2) x (2.0) typ .047 x .079 (1.8) .071 (1.0) .039 latchdown position 36 l (+) 2 5 4 1 l (-) nc com (15.8) .622 (22.0) .866 (5.08) typ .200 (2.8) typ .110 no lb16ckw01-12-cj single pole models do not have terminals 4, 5, & 6. lb26rgw01-12-cj single pole models do not have terminals 4, 5, & 6.
illuminated switches standard size snap-in pushbuttons lb series general speci?cations sales@greatecs.com www.greatecs.com 2 illuminated switches electrical capacity (resistive load) power level (silver): 3a @ 125v ac or 3a @ 250v ac or 3a @ 30v dc logic level (gold): 0.4va maximum @ 28v ac/dc maximum (applicable range 0.1ma ~ 0.1a @ 20mv ~ 28v) note: find additional explanation of operating range in supplement section. other ratings contact resistance: 50 milliohms maximum for silver; 100 milliohms maximum for gold insulation resistance: 200 megohms minimum @ 500v dc dielectric strength: 1,000v ac minimum between contacts for 1 minute minimum; 1,500v ac minimum between contacts & case for 1 minute minimum mechanical life: 1,000,000 operations minimum for momentary circuit 200,000 operations minimum for maintained circuit electrical life: 100,000 operations minimum nominal operating force: 4.41n contact timing: nonshorting (break-before-make) travel: momentary: pretravel .059 (1.5mm); overtravel .059 (1.5mm); total travel .118 (3.0mm) maintained: pretravel .087 (2.2mm); overtravel .031 (0.8mm); total travel .118 (3.0mm) materials & finishes housing: snap-in frame: stainless steel movable contact: silver alloy or copper with gold plating stationary contacts: silver alloy or copper with gold plating base: liquid crystal polymer (ul94v-0) switch terminals: phosphor bronze with silver or gold plating lamp terminals: brass with silver plating environmental data operating temp range: C25c through +50c (C13f through +122f) note: when used with a polyvinyl chloride splash cover, the lowest limit is 0c (32f) humidity: 90 ~ 95% humidity for 96 hours @ 40c (104f) vibration: 10 ~ 55hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours shock: 50g (490m/s 2 ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) sealing: not available for snap-in; see next section for panel seal. installation cap installation force: 3.92n maximum downward force on cap quick connect force: 52.95n maximum downward force on connector soldering time & temperature: standards & certications flammability standards: ul94v-0 housing & base ul & c-ul recognized: all models recognized at 3a @ 125v or 250v ac or 0.4va @ 28v ac/dc maximum; ul file no. woyr2.e44145; add /u to end of part number to order ul mark on switch. c-ul file no. woyr8.e44145; add /c-ul to end of part number to order c-ul mark on switch. csa file nos. 023535-0-000; add /c to end of part number to order csa mark on switch. glass ber reinforced polyamide (ul94v-0) csa certied: all models certied at 3a @125v or 250v ac or 0.4va @ 28v ac/dc maximum; manual soldering: see prole a in supplement section. r
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 3 illuminated switches cutaway pole & circuit plunger position ( ) = momentary connected terminals throw & switch/lamp schematics pole model normal down normal down notes: switch is marked with nc, no, com, l+, lC. lamp circuit is isolated and requires external power source. sp lb15 * on on (on) on 1-3 1-2 spdt dp * on on (on) on 1-3 4-6 1-2 4-5 dpdt * when in latchdown position for the alternate circuit, cap position is .039 (1.0mm) above the built-in bezel. l (+) (-) l l (+) (-) l 1 32 com no nc 4 6 1 32 5 com com nc nc no no lb16 lb25 lb26 shapes & panel cutouts s .622 (15.8mm) square .854 (21.7mm) round .622 x .866 (15.8mm x 22.0mm) rectangular (16.2) sq .638 (22.0) dia .866 (11.5 ) .453 (1.5) r .059 (22.4) .882 (16.2 ) .638 cutout for 1 switch: .638 x .638 (16.2mm x 16.2mm) cutout for 1 switch with barriers: .638 x .815 (16.2mm x 20.7mm) cutout for 1 switch: .638 x .882 (16.2mm x 22.4mm) cutout for 1 switch with barriers: .638 x 1.059 (16.2mm x 26.9mm) panel thickness for switches & barriers: .039 ~ .157 (1.0 ~ 4.0mm) panel thickness for protective guards & splash covers: .039 ~ .138 (1.0 ~ 3.5mm) c r determined at a basic temperature of 25c. lamp circuit is isolated and requires external power source. recommended resistors for neon: 33k ohms for 110v ac; 100k ohms for 220v ac * voltage v 5v ac 12v ac 110v ac current i 115ma 60ma 1.5ma endurance hours 7,000 10,000 ambient temp. range C25c ~ +50c 05 t-1 bi-pin at607 & at607n at607 incandescent 5-volt or 12-volt; at607n neon 110-volt * avg. 01 12 incandescent & neon lamp codes & specifications
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 4 illuminated switches shapes & panel cutouts (+) (-) led circuit is isolated and requires external power source. polarity marks are on the switch. if the source voltage exceeds the rated voltage, a ballast resistor is required. the resistor value can be calculated by using the formula in the supplement section. additional lamp detail is shown in the accessories & hardware section. color codes red amber green forward peak current i fm 30ma 30ma 30ma continuous forward current i f 20ma 20ma 20ma forward voltage v f 1.9v 2.0v 2.1v reverse peak voltage v rm 5v 5v 5v current reduction rate above 25c i f 0.42ma/c ambient temperature range C25 ~ +50c 5c 5d 5f no code red amber green no resistor (+) (-) t-1 1 ? 2 bi-pin at635 leds are colored in off state. bright led without resistor color white green blue forward peak current i fm 30ma 30ma 30ma continuous forward current i f 20ma 20ma 20ma forward voltage v f 3.6v 3.5v 3.6v reverse peak voltage v rm 5v 5v 5v current reduction rate above 25c i f 0.50ma/c ambient temperature range C25 ~ +50c 6f 6g 6b at625g blue at631b white at632f green t-1 bi-pin super bright single element led attention electrostatic sensitive devices (+) (-) at627 5-volt 4-element with resistor at627 12-volt 4-element with resistor at627 24-volt 4-element with resistor (+) (-) (+) (-) resistor codes color codes: forward peak current i fm continuous forward current i f 52ma 26ma 13ma forward voltage v f 5v 12v 24v reverse peak voltage v rm 4v 8v 16v current reduction rate above 25c i f 0.50ma/c ambient temperature range C25 ~ +50c 5c 5d 5f 12 24 05 red amber green at627 with resistor t-1 bi-pin bright led with resistor the electrical specications shown are determined at a basic temperature of 25c.
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 5 illuminated switches cap types & color combinations bj solid cap for incandescent lamp lens/filter colors available: cj ej at476 square jf and jg not suitable with neon lamp. fj gj color codes: b white c red d amber e yellow f green g blue j clear material: polycarbonate finish: glossy at4012 round at4026 rectangular material: polycarbonate finish: glossy at477 square at4013 round at4027 rectangular insert cap for incandescent or neon lamp jb jc je jf jg lens/filter colors available: translucent colored lens transparent clear filter lamp at607 transparent clear lens translucent colored filter lamp at607 or 607n (19.0) dia .748 (4.5) .177 (5.5 ) .217 (19.4) .764 (13.2) .520 (5.0) .197 (6.0) .236 (3.5) .138 (6.5) .256 (13.2) sq .520 (3.5) .138 (6.5) .256 (13.2) sq .520 (19.4) .764 (13.2) .520 (5.0) .197 (6.0) .236 (19.0) dia .748 (4.5) .177 (5.5 ) .217 material: polycarbonate finish: glossy at4176 square at4178 round at4177 rectangular cap for bright led without resistor lens/diuser colors available: transparent clear lens translucent colored diuser bright led at635 material: polycarbonate finish: glossy at4162 square at4164 round at4163 rectangular cap for bright led with resistor jb jc jd jf lens/diuser colors available: transparent clear lens translucent colored diuser jb jc jd jf (4.5) .177 (5.5 ) .21 7 (19.0) dia .748 (3.5) .138 (6.5) .256 (13.2) sq .520 (19.4) .764 (13.2) .520 (5.0) .197 (6.0) .236 (19.0) dia .748 (4.5) .177 (5. 5 .21 7 bright led at627 (6.5) .256 (3.5) .138 (13.2) sq .520
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 6 illuminated switches cap types & color combinations color codes: a black b white c red d amber f green j clear cap for super bright leds clear lens white diuser jb at4129 square material: polycarbonate finish: glossy leds at625 at631 at632 led circuit is isolated and requires external power source. single color leds are colored in off state; bicolor leds are translucent white in off state. polarity marks are on the switch. if the source voltage exceeds the rated voltage, a ballast resistor is required. the resistor value can be calculated by using the formula in the supplement section. additional lamp detail is shown in the accessories & hardware section. spot illuminated cap with led transparent clear lens translucent white diuser at4128 round at4130 rectangular (3.5) .138 (6.5) .256 (13.2) sq .520 (19.0) dia .748 (4.5) .177 (5.5 ) .217 (19.4) .764 (13.2) .520 (5.0) .197 (6.0) .236 material: polycarbonate finish: glossy at480 square at4016 round a b c f cap colors available: examples: at480ca (red led, black cap); at4016cfb (red/green bicolored led, white cap) cap with window factory assembled led; not available separately single color bicolor red amber green red/green forward peak current i fm 10ma 30ma 30ma 30/25ma continuous forward current i f 8ma 24ma 24ma 20ma forward voltage v f 1.9v 2.0v 2.1v 2.0/2.2v reverse peak voltage v rm 5v 5v 5v current reduction rate above 25c i f 0.13ma/c 0.40ma/c 0.40ma/c 0.43/0.38ma/c ambient temperature range C25 ~ +50c 1d 1f 1c cf led factory assembled in spot illuminated caps not available separately single color led with 1 element bicolor led with 2 elements (+) (-) (+) (-) (4.0) .157 (2.0) .079 (5.0) .197 (3.5) .138 (6.5) .256 (13.2) sq .520 (5.0) .197 (2.0) .079 (6.0) .236 (19.0) dia .748 (4.5) .177 (5.5 ) .217 material: polycarbonate finish: glossy led specications the electrical specications shown are determined at a basic temperature of 25c. when ordering spot illuminated cap separately, led color must be specied.
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 7 illuminated switches optional accessories barriers splash covers at497 end material: polyamide material: polyamide protective guards reduce depth of switch behind panel by .020 (0.5mm). at499 square protective guard opens 90 closes manually at498 center cutouts for more than 1 switch square a = .752 (19.1mm) x number of switches + .051 (1.3mm) rectangular a = .996 (25.3mm) x number of switches + .051 (1.3mm) a (16.2 ) .638 (20.0) .787 center positio n end position (19.2) .756 (1.19) .047 (19.2) .756 (23.5) .925 (5.2) .205 (4.3) typ .169 (15.0) .591 (1.19) .047 (17.0) .669 (20.0) .787 (10.0) .394 (21.0) .827 (8.0) .315 cap height when assembled (14.0) sq .551 (17.9) sq .705 (18.4) .724 (20.4) .803 (10.5) .413 (20.5) .807 (7.5) .295 cap height when assembled 180 (17.9) .705 (14.2) .559 (17.9 .705 (7.1) .280 (20.4) .803 (n) (16.2) sq .638 (39.0) min* 1.535 (n) = number of switches at4171 (10.5) .413 (20.5) .807 (20.4) .803 * minimum dimension allows opening of cover to 180 splash covers at4171 square protective guard opens 180 closes automatically materials : cover: clear polycarbonate base: black gfr polyamide coil spring: stainless steel recommended panel thickness: .039 ~ .106 (1.0mm ~ 2.7mm)
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 8 illuminated switches optional accessories opens 180 closes automatically materials: cover: clear polycarbonate base: black gfr polyamide coil spring: stainless steel recommended panel thickness: .039 ~ .106 (1.0mm ~ 2.7mm) protective guard at4057 rectangular protective guard opens 90 closes manually spring loaded protective guard at4172 rectangular protective guard (26.6) 1.047 (n) (16.2) .638 (39.0) min * 1.535 (n) = number of switches at4172 (10.5) .413 (20.5) .807 (22.4) .882 (26.6) 1.047 * minimum dimension allows opening of cover to 180 (24.1) .949 (20.4) .803 (17.9 .705 (7.1) .280 180 (7.5) .295 cap height when assembled (24.6) .969 (26.6) 1.047 (10.5) .413 (20.5) .807 (21.0) dia .827 cap height when assembled (7.3) .287 (2.5) .098 (21.8) dia .858 (30.0) dia 1.181 (24.0) sq .945 (16.5 ) .650 (16.5) .650 (24.0) .945 (22.7) .894 (30.2) 1.189 materials: pvc with polyethylene gasket; pvc loses pliability below 0c (32f). splash covers reduce depth of switch behind p anel by .020 (0.5mm). at4002 round at4001 square at4011 rectangular dust covers material: polyamide protective guards reduce depth of switch behind panel by .020 (0.5mm). (26.0) 1.024 (10.0 ) .394 (24.15) .951 (21.0 ) .827 (14.0) .551 (8.0) .315 cap height when assembled (15.0) sq .591 (2.5) .098 (7.3) .287 cap height when assembled
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 9 illuminated switches assembly instructions panel mounting nu t bezel o-ring lb-15sk 3 a 125 v ac 3 a 2 5 0 va c n . c . n . c . o . n . 5 c le d b b a led d flat a b rubber seal projection notch lamp installation & led orientation switch & cap assembly installation & maintenance align projections on lamp with grooves (b) in holder when inserting lamp. to correctly join the lamp holder and cap base, match the cut corners (a). incandescent & neon lamps at607 & at607n bright led at627 panel seal models snap-in models for panel seal models, inserted into the lamp socket which is built into the switch. the cap can then be placed on the switch. for snap-in models, bright led must be inserted into the cap (c) when inserting the led. bright & super bright leds at625, at631, at632, at635 holder when inserting the led. to correctly join the lamp holder and cap base, match the cut corners (a). round & rectangular match clip on cap assembly with receptacle inside switch. lamp terminals will then be aligned correctly with lamp socket. square match projection (c) on cap assembly with groove (c) inside switch. lamp terminals will then be aligned correctly with lamp socket. panel seal with lamps at607, at607n, and leds at614, at625, at631, at632: match projection on cap assembly with notch inside switch. lamp terminals will then be aligned correctly with lamp socket. snap-in mount in place. to mount round switch, match the antirotation projection on switch with guide cut in panel. snap into panel cutout. panel seal bushing mount insert switch from the front of the panel with the o-ring between the built-in bezel and the panel. install mounting nut at075 (supplied with switch) from the rear of the panel. overtightening mounting nut may damage the switch housing. lamp replacement actuator must be in up position. pull o cap with cap extractor at109. replace lamp and reassemble as shown above. at109 cap extractor at112 socket wrench pro j ectio n cut corner c c projection panel attention electrostatic sensitive devices
illuminated switches standard size snap-in pushbuttons lb series sales@greatecs.com www.greatecs.com 10 illuminated switches legends suggested printable area for lens shaded areas are printable areas. suggested printable area for film insert recommended print method: screen print with epoxy based ink film insert: clear polyester, 4 mil max. thickness additional methods (17.8) .701 (16.28) .641 (0.76) typ .030 (10.08) .397 (11. 6 .457 (0.76) typ .030 (11.6) sq .457 (10.08) sq .397 (0.76) typ .030 (13.2) sq .520 (11.68) sq .460 (0.76) typ .030 (19.0) dia .748 (17.48) dia .688 (0.76) typ .030 (19.4) .764 (17.88) .704 (0.76) typ .030 (13.2 ) .520 (11.68) .460 (0.76) typ .030 lens film insert filter o r diffuser on st ar t shaded areas are printable areas. (17.4) dia .685 (15.88) dia .625 (0.76) typ .030 r = (0.6) .024 (14.66) .577 recommended methods: laser etch on clear lens, screen print, or pad print on lens. epoxy based ink is recommended. gerneral information and basic soecications are presented here for customers who want to do their own legends additional methods for legends are engraving the lens and laser printing on lm inserts. maximum depth for engraving is .12 (0.3mm) on the cap lens. enamel paint is recommended to ll the engraved area.
|
