input characteristics 90-132/180-264 vac u = autoranging output power/current v out 5 v v out < 5 v s= 300 w s = 60 a p= 450 w p = 90 a m= 600 w m =120 a product grade e= 0? to +85? case c= 0? to +85? case i= -30? to +85? case output power/current v out 5 v v out < 5 v y= 50 w y = 10 a x= 75 w x = 15 a w= 100 w w = 20 a v= 150 w v = 30 a u= 200 w u = 40 a product highlights if you?e looking for the convenience of a complete, low profile, agency- approved switching power supply, look no further. the flatpac combines v icor s workhorse vi-200 family of dc-dc converters with a modular package and front-end subassembly to provide from 50 to 600 w of output power from one to three outputs. a flat plate hea tsink for use in conduction cooled applications may be specified as an alternate to the standard finned version by adding ?c?to the end of the model number. v icor s flatpac is also available with a current controlled output using batmod converter modules of 12, 24, or 48 vdc outputs. this option is specified by appending ?m?or ?c (for conduction cooled versions) to the end of the flatpac model number. the flatpac s contemporary design allows us to configure your order quickly and provide rapid turnaround on standard models. it is truly a complete power solution, enabling you to spend more time designing your system and less time worrying about how to power it. features ? microcontroller architecture ? inputs: 115/230 vac autoranging ? meets fcc part 15, en55022, class b conducted emissions ? 80-90% efficiency ? any output: 1 to 95 vdc ? module enable/disable (except lu series) ? ul, t?v, vde, ce marked ? remote sense and current limit ? bus ok and ac ok (except lu series) ? 40 ms ride-through time ? ovp and thermal shutdown ? 1 output; up to 200 w ? 1 or 2 outputs; up to 400 w ? 1, 2, or 3 outputs; up to 600 w flatpac 50 to 600 w autoranging ac-dc switchers flatpac configuration chart t ypical model: v i - r u input: 115/230 vac ; output 1: 5 vdc at 200 w output 2: 12 vdc at 200 w output 3: 12 vdc at 200 w # of t otal power part no. converters dimensions 50-200 w vi-lu 1 9.25" x 2.5" x 1.37" (234,8 x 63,5 x 34,8 mm) 200-400 w vi-mu 2 9.25" x 4.9" x 1.37" (234,8 x 124,5 x 34,8 mm) 300-600 w vi-nu 3 9.25" x 7.3" x 1.37" (234,8 x 185,4 x 34,8 mm) 100-400 w vi-pu ? 2 9.25" x 4.9" x 1.37" (234,8 x 124,5 x 34,8 mm) 150-600 w vi-qu ? 3 9.25" x 7.3" x 1.37" (234,8 x 185,4 x 34,8 mm) 150-600 w vi-ru ? 3 9.25" x 7.3" x 1.37" (234,8 x 185,4 x 34,8 mm) u u u e 1 1 0 single outputs: dual outputs: t riple outputs: options bc = batmod/conduction cooled bm= batmod cc = conduction cooled output voltage z 2 v m 10 v k 40 v y 3.3 v 1 12 v 4 48 v 0 5 v p 13.8 v h 52 v x 5.2 v 2 15 v f 72 v w 5.5 v n 18.5 v d 85 v v 5.8 v 3 24 v b 95 v t 6.5 v l 28 v r 7.5 v j 36 v output power v out 5 v v out < 5 v w= 100 w w = 20 a v= 150 w v = 30 a u= 200 w u = 40 a s= 300 w s = 60 a q= 400 w q = 80 a flatpac 01/05 1 of 4
flatpac specifications (typical at 25?, nominal line and 75% load, unless otherwise specified.) input characteristics ac line input autoranging 90-132/180-264 vac line frequency 47 to 63 hz (c-grade and e-grade) 47 to 440 hz (i-grade) inrush current 115 vac operation 1 converter: 16 a @ peak line; 2 converters: 23 a @ peak line; 3 converters: 39 a @ peak line 230 vac operation 1 converter: 32 a @ peak line; 2 converters: 47 a @ peak line; 3 converters: 78 a @ peak line ride-through time (full load) 90/180 vac low line 5 ms minimum 115/230 vac nominal line 40 ms minimum ac fail warning time 5 ms minimum (low line, full load) ac and bus ok (2 and 3 converter models only) off state vce = 70 v maximum on state vcesat = 0.4 v maximum @ 1 ma (1.5 ma max.) module disable (2 and 3 converter models only, optically isolated led input) continuous forward current 1 ma to 30 ma forward voltage 1.65 v max. at 30 ma dielectric withstand primary to chassis gnd 2,121 vdc primary to secondary 4,242 vdc secondary to chassis gnd 707 vdc output characteristics (applies to each output individually) e-grade c-, i-grade min. typ. max. min. typ. max units notes set point accuracy 1% 2% 0.5% 1% v nom load/line regulation 0.5% 0.05% 0.2% v nom ll to hl, 10% to full load load/line regulation 1% 0.2% 0.5% v nom ll to hl, no load to full load output temperature drift 0.02 0.01 0.02 %/? over rated temperature long term drift 0.02 0.02 %/1 k hours output ripple 2 v 150 mv 60 mv 100 mv p-p 20 mhz bandwidth 5 v 5% 2% 3% p-p 20 mhz bandwidth 10-48 v 3% 0.75% 1.5% p-p 20 mhz bandwidth output voltage trimming 1 50% 110% 50% 110% t otal remote sense compensation 0.5 0.5 volts 0.25 v max. neg. leg ovp set point 125% 115% 125% 135% v nom recycle power current limit 105% 135% 105% 125% i nom automatic restart short circuit current 2 20% 140% 20% 130% i nom thermal characteristics efficiency 78-88% 80-90% shut down temp. ?case 90 95 105 90 95 105 ? cool and recycle power to restart operating temp. ?case 85 85 ? see thermal curves mechanical specifications w eight 3 22.4 (652) 22.4 (652) ounces (grams) safety agency approvals ul, csa, t?v, vde, iec 950, ce marked for low voltage directive, 73/23/eec environmental characteristics/product grade designators storage temperature -20? to +100? (c-grade and e-grade) -55? to +100? (i-grade) operating temperature (case) 0? to +85? (c-grade and e-grade) -30? to +85? (i-grade) emi / emc characteristics (performed on selected samples representative of the u series flatpac product family.) conducted emissions, lisn en 55022 and fcc r&r, part 15, subpart b, class b electrostatic discharge iec 801-2, 1991, level 4; ? kv contact, 15 kv air discharge rf radiated immunity, e-field iec 801-3, 1984; 27 mhz to 500 mhz, 3 v/m, cw electrical fast transients/burst en 61000-4-4, level 2; ? kv, surge immunity en 61000-4-5, class 3; ? kv line to ground, ? kv line to line 1 10 v, 12 v and 15 v outputs, trim range ?0%. consult factory for wider trim range. 2 output voltages of 5 v or less incorporate foldback current limiting, greater than 5 v incorporate straight line current limiti ng. 3 f or mu, pu series, multiply value by 2; for nu, qu, ru series, multiply value by 3. flatpac 01/05 2 of 4
thermal curves, 5 v output thermal curves, 10 to 48 v output 0 75 150 225 300 375 450 525 600 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 ambient temperature (deg. c) output power (watts) 0 25 50 75 100 125 150 175 200 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 ambient temperature (deg. c) output power (watts) 0 50 100 150 200 250 300 350 400 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 ambient temperature (deg. c) output power (watts) 0 75 150 225 300 375 450 525 600 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 ambient temperature (deg. c) output power (watts) 0 25 50 75 100 125 150 175 200 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 ambient temperature (deg. c) output power (watts) 0 50 100 150 200 250 300 350 400 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 ambient temperature (deg. c) output power (watts) application circuits mod dis e mod dis + ac ok e ac ok + bus ok e bus ok + internal supervisory circuits (optocouplers) ac mains earth ground l1 l2/n gnd 2-up and 3-up 1-up v line 90 (180) vac ac line interrupted ac line ac ok bus ok t0 t1 t2 t3 t4 conditions: full load 90 (180) vac, ac line t ime interval min typ max units notes t0-t1 0 0.1 1.0 ms t2-t3 0 40 ms ride-through time t2-t4 5 ms hold-up time t3-t4 5 ms ac fail warning time resistor values for trimming standard output voltages nom. output voltage 5 v 12 v 15 v 24 v 28 v 48 v trim range r1(k ? ) 0.953 15.8 22.1 41.2 48.7 90.9 +10%, -10% r2(k ? )909 090909 090 r2 +s trim 10k r1 + vout vout rtn +o ? ? ac mains connections power up and power down sequencing output trimming ambient temperature (deg. c) ambient temperature (deg. c) ambient temperature (deg. c) ambient temperature (deg. c) ambient temperature (deg. c) ambient temperature (deg. c) lu series mu, pu series nu, qu, ru series lu series mu, pu series nu, qu, ru series output power (watts) output power (watts) output power (watts) output power (watts) output power (watts) output power (watts) free air 50 lfm 100 lfm 250 lfm 500 lfm 750 lfm 1000 lfm free air 50 lfm 100 lfm 250 lfm 500 lfm 750 lfm 1000 lfm flatpac 01/05 3 of 4
mechanical drawings 10 11 12 13 14 15 16 7 8 9 mounting hole ?0.15 0.01 thru 4 places 2.156 0.010 54.76 0.25 0.192 0.010 4.88 0.25 0.18 4.57 6.00 152.4 2.540 0.030 64.52 0.76 1.27 32.26 output 1 mounting hole ?0.15 0.01 thru 5 places 10 16 10 11 12 13 14 15 16 10 11 12 13 14 15 16 10 11 12 13 14 15 16 7 8 9 1 2 3 4 5 6 4.562 0.010 115.87 0.25 2.281 0.010 57.94 0.25 0.199 0.010 5.05 0.25 0.18 4.57 6.00 152.4 4.960 0.030 125.98 0.76 3.83 97.16 1.17 29.72 output 1 output 2 output 1 + 10 11 12 13 14 15 16 10 16 10 11 12 13 14 15 16 10 11 12 13 14 15 16 10 11 12 13 14 15 16 10 11 12 13 14 15 16 10 16 10 16 10 11 12 13 14 15 16 7 8 9 1 2 3 4 5 6 7.000 0.010 177.8 0.25 4.710 0.010 119.63 0.25 2.290 0.010 58.17 0.25 mounting hole ?0.15 0.01 thru 6 places 0.190 0.010 4.83 0.25 0.18 4.57 6.00 152.4 7.380 0.030 187.45 0.76 5.48 139.19 1.93 49.02 output 1 output 2 output 3 output 1 output 1 output 2 + + + 12 1.375 0.020 34.91 0.51 0.50 12.57 9.245 0.030 234.82 0.76 1.11 28.19 measure case temperature this surface. inputs 1 mod dis 2 mod dis+ 3 ac ok 4 ac ok+ 5 bus ok 6 bus ok+ 7 ac in l1 8 ac in l2/n 9 chassis gnd outputs 10 +out (#10-32 stud) 11 +out 12 +sense (v trim *) 13 trim (i trim *) 14 ?ense (i mon *) 15 ?ut 16 ?ut (#10-32 stud) *on flatpacs with batmods only. input connector, amp p/n 644488-6; mating connector, mta-100 idc series te r minals for #16-12 awg wire output connector, amp p/n 644486-5; mating connector, mta-100 idc series all models lu series mu, pu series nu, qu, ru series flatpac 01/05 4 of 4
|
