original creation date: 01/05/00 last update date: 01/21/00 last major revision date: 01/11/00 mv54act573-x rev 0a0 microcircuit data sheet octal d-type latch with tri-state outputs general description the act573 is a high speed octal latch with buffered common latch enable (le) and buffered common output enable (oe) inputs. this device is functionally identical to the act373 but has inputs and outputs on opposite sides. ns part numbers (blank) industry part number 54act573 prime die j573 controlling document 5962-87664 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 c 2 static tests at +125 c 3 static tests at -55 c 4 dynamic tests at +25 c 5 dynamic tests at +125 c 6 dynamic tests at -55 c 7 functional tests at +25 c 8a functional tests at +125 c 8b functional tests at -55 c 9 switching tests at +25 c 10 switching tests at +125 c 11 switching tests at -55 c 1
microcircuit data sheet mv54act573-x rev 0a0 features - icc and ioz reduced by 50% - inputs and outputs on opposite sides of package allowing easy interface with microprocessors. - useful as input or output port for microprocessors - functionally identical to act373 - tri-state outputs for bus interfacing - outputs source/sink 24 ma - act573 has ttl-compatible inputs - standard military drawing (smd) 2
microcircuit data sheet mv54act573-x rev 0a0 (absolute maximum ratings) (note 1) supply voltage (vcc) -0.5v to +7.0v dc input diode current (iik) -20 ma vi = -0.5v +20 ma vi = vcc +0.5v dc input voltage (vi) -0.5v to vcc +0.5v dc output diode current (iok) -20 ma vo = -0.5v +20 ma vo = vcc +0.5v dc output voltage (vo) -0.5v to vcc +0.5v dc output source or sink current (io) +50 ma dc vcc or ground current per output pin (icc or ignd) +50 ma storage temperature (tstg) -65 c to +150 c junction temperature (tj) 175 c cdip note 1: absolute maximum ratings are those values beyond which damage to the device may occur. the databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. national does not recommend operation of fact tm circuits outside databook specifications. recommended operating conditions supply voltage (vcc) 4.5v to 5.5v input voltage (vi) 0v to vcc output voltage (vo) 0v to vcc operating temperature (ta) -55 c to + 125 c minimum input edge rate (delta v/ delta t) act devices vin from 0.8v to 2.0v 125 mv/ns vcc @ 4.5v, 5.5v 3
mv54act573-x rev 0a0 microcircuit data sheet electrical characteristics dc parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp. range: -55c to 125c. note: -55c temperature, subgroup 3 is guaranteed but not tested. symbol parameter conditions notes pin- name min max unit sub- groups iih high level input current vcc=5.5v, vm=5.5v 1, 2 input 0.1 ua 1 1, 2 input 1.0 ua 2, 3 iil low level input current vcc=5.5v, vm=0.0v 1, 2 input -0.1 ua 1 1, 2 input -1.0 ua 2, 3 vol low level output voltage vcc=4.5v, vil=0.8v, vih=2.0v, iol=50.0ua 1, 2 output .10 v 1, 2, 3 vcc=5.5v, vil=0.8v, vih=2.0v, iol=50.0ua 1, 2 output .10 v 1, 2, 3 vcc=4.5v, vil=0.8v, vih=2.0v, iol=24.0ma 1, 2 output .36 v 1 1, 2 output .50 v 2, 3 vcc=5.5v, vil=0.8v, vih=2.0v, iol=24.0ma 1, 2 output .36 v 1 1, 2 output .50 v 2, 3 viol dynamic output current low vcc=5.5v, vil=0.8v, vih=2.0v, iol=50.0ma 1, 2, 5 output 1.65 v 1, 2, 3 voh high level output voltage vcc=4.5v, vil=0.8v, vih=2.0v, ioh=-50.0ua 1, 2 output 4.40 v 1, 2, 3 vcc=5.5v, vil=0.8v, vih=2.0v, ioh=-50.0ua 1, 2 output 5.40 v 1, 2, 3 vcc=5.5v, vil=0.8v, vih=2.0v, ioh=-24.0ma 1, 2 output 4.86 v 1 1, 2 output 4.70 v 2, 3 vcc=4.5v, vil=0.8v, vih=2.0v, ioh=-24.0ma 1, 2 output 3.86 v 1 1, 2 output 3.70 v 2, 3 vioh dynamic output current high vcc=5.5v, vil=0.8v, vih=2.0v, ioh=-50.0ma 1, 2, 5 output 3.85 v 1, 2, 3 iozh maximum tri-state leakage current vcc=4.5v, vih=2.0v, vm=4.5v 1, 2 output 0.25 ua 1 1, 2 output 5.0 ua 2, 3 vcc=5.5v, vih=2.0v, vm=5.5v 1, 2 output 0.25 ua 1 1, 2 output 5.0 ua 2, 3 iozl maximum tri-state leakage current vcc=4.5v, vih=2.0v, vm=0.0v 1, 2 output -0.25 ua 1 1, 2 output -5.0 ua 2, 3 vcc=5.5v, vih=2.0v, vm=0.0v 1, 2 output -0.25 ua 1 1, 2 output -5.0v ua 2, 3 4
mv54act573-x rev 0a0 microcircuit data sheet electrical characteristics dc parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp. range: -55c to 125c. note: -55c temperature, subgroup 3 is guaranteed but not tested. symbol parameter conditions notes pin- name min max unit sub- groups icch supply current outputs high vcc=5.5v, vinh=5.5v, vinl=0.0v 1, 2 vcc 100 na 1 1, 2 vcc 80 ua 2, 3 iccl supply current outputs low vcc=5.5v, vinh=5.5v, vinl=0.0v 1, 2 vcc 100 na 1 1, 2 vcc 80 ua 2, 3 iccz supply current outputs tri-state vcc=5.5v, vinh=5.5v, vinl=0.0v 1, 2 vcc 100 na 1 1, 2 vcc 80 ua 2, 3 iccf supply current functional vcc=5.5v, vinh=5.5v, vinl=0.0v 1, 2 vcc 100 na 1 1, 2 vcc 80 ua 2, 3 icct supply current per input vcc=5.5v, viht=vcc-2.1v 1, 2 vcc 1.0 ma 1 1, 2 vcc 1.6 ma 2, 3 vic+ positive input clamp voltage vcc=0.0v, im=1.0ma 8, 9 inputs 0.4 1.5 v 1 vic- negative input clamp voltage vcc=open, im=-1.0ma 8, 9 inputs -0.4 -1.5 v 1 5
mv54act573-x rev 0a0 microcircuit data sheet electrical characteristics ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr/tf=3.0ns, temp range: -55c to +125c. note: -55c temperature, subgroup 11 is guaranteed but not tested. symbol parameter conditions notes pin- name min max unit sub- groups tplh(1) propagation delay vcc=4.5v 3, 4, 7 dn to on 1.5 10.5 ns 9 3, 4, 7 dn to on 1.5 13.5 ns 10, 11 tphl(1) propagation delay vcc=4.5v 3, 4, 7 dn to on 1.5 10.5 ns 9 3, 4, 7 dn to on 1.5 13.5 ns 10, 11 tplh(2) propagation delay vcc=4.5v 3, 4, 7 le to on 1.5 10.5 ns 9 3, 4, 7 le to on 1.5 13.0 ns 10, 11 tphl(2) propagation delay vcc=4.5v 3, 4, 7 le to on 1.5 9.5 ns 9 3, 4, 7 le to on 1.5 12.0 ns 10, 11 tpzh output enable time vcc=4.5v 3, 4, 7 oe to on 1.5 10.0 ns 9 3, 4, 7 oe to on 1.5 11.5 ns 10, 11 tpzl output enable time vcc=4.5v 3, 4, 7 oe to on 1.5 9.5 ns 9 3, 4, 7 oe to on 1.5 11.0 ns 10, 11 tphz output disable time vcc=4.5v 3, 4, 7 oe to on 1.5 11.0 ns 9 3, 4, 7 oe to on 1.5 13.5 ns 10, 11 tplz output disable time vcc=4.5v 3, 4, 7 oe to on 1.5 8.5 ns 9 3, 4, 7 oe to on 1.5 10.5 ns 10, 11 ts(h/l) setup time high or low vcc=4.5v 6 dn to le 4.0 ns 9 6 dn to le 4.5 ns 10, 11 th(h/l) hold time high or low vcc=4.5v 6 dn to le 0.5 ns 9 6 dn to le 1.0 ns 10, 11 6
mv54act573-x rev 0a0 microcircuit data sheet electrical characteristics ac parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr/tf=3.0ns, temp range: -55c to +125c. note: -55c temperature, subgroup 11 is guaranteed but not tested. symbol parameter conditions notes pin- name min max unit sub- groups tw(h) pulse width vcc=4.5v 6 le pulse width 5.0 ns 9, 10, 11 group e post irradiation parametric limits (the following conditions apply to all the following parameters, unless otherwise specified.) dc: the 100k rad (si) dose level includes a post irradiation 168 hour, 25 deg c biased anneal. all dc and ac subgroups 1, 7 and 9 electricals must be met with the following exceptions: icch supply current outputs high dose level = 3k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 100 ua 1 dose level = 10k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 1.0 ma 1 dose level = 30k, 50k, 100k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 3.5 ma 1 iccl supply current outputs low dose level = 3k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 100 ua 1 dose level = 10k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 1.0 ma 1 dose level = 30k, 50k, 100k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 3.5 ma 1 iccz supply current outputs tristated dose level = 3k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 100 ua 1 dose level = 10k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 1.0 ma 1 dose level = 30k, 50k, 100k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v vcc 3.5 ma 1 icct supply current per input dose level = 3k, 10k rad (si), vcc=5.5v, vinl=0.0v, viht=vcc-2.1v vcc 1.6 ma 1 dose level =30k, 50k, 100k rad (si), vcc=5.5v, vinl=0.0v, viht=vcc-2.1v vcc 3.5 ma 1 iozh maximum tri-state leakage current dose level = 3k, 10k, 30k, 50k, 100k rad (si), vcc=4.5v, vinl=0.0v, vinh=4.5v, vih=2.0v, vm=4.5v outputs 25 ua 1 dose level = 3k, 10k, 30k, 50k, 100k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v, vih=2.0v, vm=5.5v outputs 25 ua 1 iozl maximum tri-state leakage current dose level = 3k, 10k, 30k, 50k, 100k rad (si), vcc=4.5v, vinl=0.0v, vinh=4.5v, vih=2.0v, vm=0.0v outputs -25 ua 1 dose level = 3k, 10k, 30k, 50k, 100k rad (si), vcc=5.5v, vinl=0.0v, vinh=5.5v, vih=2.0v, vm=0.0v outputs -25 ua 1 7
mv54act573-x rev 0a0 microcircuit data sheet note 1: screen tested 100% on each device at +25c & +125c temperature, subgroups 1, 2, 7, & 8. note 2: sample tested (method 5005, table 1) on each mfg. lot at +25c & +125c temperature, subgroups a1, 2, 7, & 8. note 3: screen tested 100% on each device at +25c temperature only, subgroup a9. note 4: sample tested (method 5005, table 1) on each mfg. lot at +25c & +125c temperature, subgroups a9 & 10. note 5: transmission line driving test, guardband limits set for +25c, 2 msec duration max. note 6: guaranteed but not tested (design characterization data). note 7: +25c & +125c min limits guaranteed for 5.5v by guardbanding 4.5v minimum limits. note 8: screen tested 100% on each device at +25c temperature only, subgroup 1. note 9: sample tested (method 5005, table 1) on each mfg. lot at +25c temperature only, subgroup 1. 8
microcircuit data sheet mv54act573-x rev 0a0 revision history rev ecn # rel date originator changes 0a0 m0003617 01/21/00 donald b. miller initial mds release 9
|
