n overview the ftp-637 mcl series are 24v driven high-speed printers with a ultra low profle auto cutter and long life. the ftp-637 mcl series can be used for a variety of applications, such as pos terminals, ticket vending machines, label printers, banking terminals, and measurement and medical equipment. n h ighlights ? ultra low profle height 21.8 mm, width 103.2/104.5 mm, depth 42.2 mm ? high speed printing it can print at 100/150 mm/s maximum by using fujitsu's unique head drive control. ? auto cutter long life and high reliable guilotine with dedicated motor. ? easy paper setting our lever platen release mechanism allows a wide paper route, so paper can be easily inserted. conventional auto loading is also available. ? multifunctional die-cast frame wide operating temperature range, long continuous printing, high esd absorbtion and discharge of static electricity vibration and shock resistant. ? rohs compliant FTP-637MCL401/601 24v driven, ftp-607 s eries 3 high speed thermal printer FTP-637MCL401/601 ftp-637dsl291
2 FTP-637MCL401/601 n p art numbers n specifi cations part number FTP-637MCL401/601 printing method thermal-line dot method dot structure 576 dots/line dot pitch (horizontal) 0.125 mm (8 dots/mm)dot density dot pitch (vertical) 0.125 mm (8 dots/mm)line feed pitch effective printing area 72 mm number of columns ank 48 columns/line (maximum 12 x 24 dot font) paper width 80 mm paper thickness 60 to 100 m (some paper in this range may not be used because of paper characteristics) printing speed mcl401 maximum 100mm/sec. (800 dot line/sec.) mcl601 maximum 150mm/sec. (1,200 dot line/sec.) alphanumeric, kana: 159 types international characters: 195 types jis kanji (kanji cg loaded board): about 6800 types 2 24 dots, (1.5 3.0 mm), 48 columns: ank 24 24 dots, (3.0 3.0 mm), 24 columns: ank 8 16 dots, (1.0 2.0 mm), 72 columns: ank 6 16 dots, (2.0 2.0 mm), 36 columns: ank specifcations item character types character, dimensions (w h), number of columns part number easy load model with low profle cutter FTP-637MCL401 ftp-637mcl601 lsi for driving ftp-627cu301r interface board for mech/cutter cutter mcl401 ftp-637dsl291r parallel (centronics) /serial (rs-232c) mcl601 ftp-637dsl603r (usb) ftp-637dsl605r serial (rs-232c) interface cables parallel (centronics) ftp-628y202 serial (rs232c) ftp-628y302 usb ftp-629y301 power cables logic ftp-629y401 head, motor ftp-629y601
3 FTP-637MCL401/601 n specifi cations *+5?c to +40?c printing density assurance rance. item specifcation iterface conforms to rs232c/centronics power supply for print head 24 vdc average current, 0.51a (1.17a peak) (print ratio: 12.5%, print speed 100mm/sec.) for motor 24 vdc 5%, 1.1 a maximum for cutter 24 vdc 5%, 1.4 a maximum for logic 5 vdc, 0.2 a maximum dimensions mechanism with cutter 104.5 x 42.2 x 21.8 mm (wxdxh) interface board dsl291 70 x 60 x 12 mm (wxdxh) dsl60x 95 x 70 x 12 mm (wxdxh) weight mechanism with cutter approximately 116g/124g interface board approximately 25g / 34g life head pulse durability: 100 million pulses/dot (print ratio: 12.5% or less). mcl401 abrasion resistance: paper traveling distance 50km mcl601 abrasion resistance: paper feed length 100km. cutter mcl401 500,000 cuts mcl601 1,000,000 cuts platen 5,000 times (open/close) operating environment operating temperature* 0oc to +50oc operating humidity 20 to 85% rh (no condensation) storage temperature -20oc to +60oc (paper not included) storage humidity 5 to 95% rh (no condensation) detection function head temperature detection detected by thermistor paper out/mark detection detected by photo-interruptor platen release detected by sliding switch recommended thermal sensitive paper high sensitive paper tf50ks-e4 (nippon paper) standard paper tf60ks-e (nippon paper), ftp-020pu001 (58mm) pd150r (oji paper) ftp-020pu701 (58mm) medium life paper tf60ks-f1 (nippon paper) ftp-020p0102 (58mm) pd170r (oji paper) p220vbb-1 (mitsubishi paper) long life paper pd160r (oji paper) afp-235 (mitsubishi paper) tp50kj-r (nippon paper) ha220aa (nippon paper)
4 FTP-637MCL401/601 n funct ion of i nterface board n di mensions 1. printer mechanism unit: mm note: 1. dimensions are nominal value (tolerance 5 unless otherwise specifed). 2. platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open. FTP-637MCL401/601 degrees 27.7 1.6 103.2 / 104.5 55 28.3 (29.3 max.) 21.8 10.7 5.4 (42.2) .6 36.0 90.4 13.1 22.1 13.9 (14.4 max.) 7.5 center of paper center of mechanism item item 1. test print function 8. cutter trouble detect 2. paper out detection 9. motor power saving function 3. paper near end detection 10. mark detection function 4. paten open detection 11. mcu operation abnormality detection 5. thermal head temperature abnormality detection 12. power on/off sequence protection 6. blow-out fuse detection 13. motor over-current protection 7. head voltage abnormality detection 14. hardware timer
5 FTP-637MCL401/601 2. interface board ftp-637dsl291r unit: mm 49.5 34.5 17.5 1.25 3.25 3.25 2.25 1.2 42.0 53.5 (60.0) cn7 cn6 cn2 6 2 2 30 29 3 8 8 30 cn9 cn10 cn8 4.0 1.0 3.25 3.25 1.45 25.5 50.5 63.5 (70.0) 13.5 3-?3.2 fg?3.2 1.6 3 7 note: all dimensions are nominal value () means just reference the mounting height is the max.
6 FTP-637MCL401/601 name functions remarks note cn +24v power supply connector connection for +24v power supply cn2 - - cn3 usb i/f connector connection for usb interface cn4 rs-232c connection for serial interface cn5 cutter connector connection for paper cutter cn6 operation panel connector connection for operation panel * cn7 near end sensor connector connection for near end switch *2 cn8 - - cn9 logic power connector connection for +5v power supply cn10 head/motor connector connection for thermal head & paper feed motor 2-inch, 24 pin note: *1: option *2: depends on specifcation n i nterface board ftp-637dsl601 s eries connectors on control board
7 FTP-637MCL401/601 1. connector (fpc) specifcation (cn4) (1) connector mechanical unit side: fpc connector remote side (housing site): 52610-3071 (made by molex) (2) pin assignment on the mechanical side o n l a n g i s o / i s t n e t n o c 1 k h p ? ) e d o h t a c ( r e t p u r r e t n i o t o h p 2 n e s v i r o s n e s r e p a p r o f y l p p u s r e w o p d n u o r g 3 e h p o ) r o t t i m e ( r e t p u r r e t n i o t o h p 4 h v i r e w o p e v i r d d a e h 5 h v i r e w o p e v i r d d a e h 6 h v i r e w o p e v i r d d a e h 7 i d i t u p n i a t a d 8 3 b t s i 3 e b o r t s 9 4 b t s i 4 e b o r t s 0 1 d d v i r e w o p c i g o l 1 1 d n g ? d n u o r g d a e h 2 1 d n g ? d n u o r g d a e h 3 1 d n g ? d n u o r g d a e h 4 1 d n g ? r e w o p e v i r d d a e h 5 1 d n g ? r e w o p e v i r d d a e h 6 1 d n g ? r e w o p e v i r d d a e h 7 1 m t o r o t s i m r e h t 8 1 1 b t s i 1 e b o r t s 9 1 2 b t s i 2 e b o r t s 0 2 t a l i h c t a l a t a d 1 2 k l c i k c o l c 2 2 h v i r e w o p e v i r d d a e h 3 2 h v i r e w o p e v i r d d a e h 4 2 h v i r e w o p e v i r d d a e h 5 2 w s ? h c t i w s n e p o n e t a l p 6 2 w s ? h c t i w s n e p o n e t a l p 7 2 a / t m i a l a n g i s e t i c x e r o t o m 8 2 a / t m i a l a n g i s e t i c x e r o t o m 9 2 b / t m i b l a n g i s e t i c x e r o t o m 0 3 b / t m i b l a n g i s e t i c x e r o t o m
8 FTP-637MCL401/601 platen unit thermal head motor sensor (photo- interruptor) 30, 29, .....................2,1 connector no (fpc pin numbers) fpc connect terminal: surface side 2. cutter (cn5) connector on control circuit side: 52610-0871 molex or equivalent . o n l a n g i s o / i s t n e t n o c . o n l a n g i s o / i s t n e t n o c 1 n e s v i r e w o p r o s n e s r e p a p 2 e h p o ) r o t t i m e ( r o t p u r r e t n i o t o h p 3 k h p o ) e d o h t a c ( r o t p u r r e t n i o t o h p 4 a / t m i a l a n g i s e t i c x e r o t o m 5 a / t m i a l a n g i s e t i c x e r o t o m 6 b / t m i b l a n g i s e t i c x e r o t o m 7 b / t m i b l a n g i s e t i c x e r o t o m 8 c n ? d e t c e n n o c t o n japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/printers/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2007 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. august 8, 2007
|
