n fourth generation design n design based on worldwide communica- tions, computer peripheral and office automation relay requirements n offers excellent board space savings n meets 2.5kv bellcore surge require- ments n terminal design based on omron's successful g6s relay n available in pcb through-hole, smt gullwing and smt inside-l terminals n 85 c high ambient versions coming soon! low signal relay g6k specifications n contact data load resistive load (cos f =1) rated load 0.3 a at 125 vac 1 a at 30 vdc contact material ag (au clad) max. carry current 1 a max. operating voltage 125 vac, 60 vdc max. operating current 1 a max. switching capacity 37.5 va, 30w min. permissible load 10 m a at 10 mvdc to order: select the part number and add the desired coil voltage rating (e.g., G6K-2F- dc5 ). part number (non-latching, fully sealed) type contact form smt gullwing smt inside-l pcb through-hole standard dpdt G6K-2F g6k-2g g6k-2p high-ambient dpdt to be announced ordering information ( datasheet : )
g6k g6k 2 note: data shown are of initial value. standard dpdt (G6K-2F, g6k-2g, g6k-2p) n characteristics contact resistance (initial) 80 m w max. operate time 3 ms max. release time 3 ms max. bounce time 3 ms max. insulation resistance 1,000 m w min. (at 500 vdc) dielectric strength 1,500 vac for 1 min. between coil and contacts 1,000 vac for 1 minute between contacts of different poles 750 vac for 1 minute between contacts of the same pole surge withstand voltage 2,500 v, 2x10 m s (conforms to bellcore specifications) between coil and contacts 1,500 v, 10x160 m s (conforms to fcc part 68) between contacts of different poles 1,500 v, 10x160 m s (conforms to fcc part 68) between contacts of the same pole vibration mechanical durability 10 to 55 hz; 5.0 mm double amplitude malfunction durability 10 to 55 hz; 3.3 mm double amplitude shock mechanical durability 1,000 m/s 2 ; approx. 100g malfunction durability 750 m/s 2 ; approx. 75g ambient temperature standard versions: -40 c to 70 c (-40 f to 158 f) high ambient versions: -40 c to 85 c (-40 f to 185 f) humidity 35 to 85% rh service life mechanical 100,000,000 operations min. (at 36,000 operations per hour) electrical 100,000 operations min. at rated load (at 1,800 operations per hour) rated rated coil pick-up dropout maximum power voltage current resistance voltage voltage voltage consumption (vdc) (ma) ( w ) % of rated voltage (mw) 3 33.0 91 80% max. 10% min. 200% max. 100 (approx.) 4.5 23.2 194 5 21.1 237 6 17.6 341 9 11.3 795 12 8.5 1,407 24 4.6 5,220 note: 1. the rated current and coil resistance are measured at a coil temperature of 23 c (73 f) with a tolerance of 10%. 2. the operating characteristics are measured at a coil temperature of 23 c (73 f) unless otherwise specified. 3. pick-up voltage is measured with no carry current across the contacts. 4. pick-up voltage will vary with temperature. 5. specifications subject to change without notice. high-ambient dpdt (to be released) rated rated coil pick-up dropout maximum power voltage current resistance voltage voltage voltage consumption (vdc) (ma) ( w ) % of rated voltage (mw) 3 46.7 64 75% max. 10% min. 200% max. 140 (approx.) 4.5 31.1 145 5 28.0 179 6 23.3 257 9 15.6 579 12 11.7 1,029 24 5.8 4,114
g6k g6k 3 G6K-2F terminal arrangement/ mounting pads internal connections (top view) (top view) g6k-2g terminal arrangement/ mounting pads internal connections (top view) (top view) unit: mm (inch) dimensions n relays n approvals ul (file no. e41515) / csa (file no. lr24825) pending g6k-2p terminal arrangement/ mounting holes internal connections (bottom view) (bottom view) orientation mark orientation mark orientation mark 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 5.5 (0.22) 1 (0.04) 1.19 (0.05) 2 (0.08) eight, 0.8-dia. holes 2.54 (0.10) 2.54 (0.10) 5.08 0.1 (0.20) 7.62 0.1 (0.30) 0.71 (0.03) 1.19 (0.05) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 7.2 (0.28) 2 (0.08) 1 (0.04) 1.19 (0.05) 5.0 0.3 (0.20) 10 0.2 (0.39) 2.54 (0.10) 2.54 (0.10) 0.5 (0.02) 2.54 (0.10) 8.2 (0.32) 0.1 (0.004) 6.5 0.2 (0.26) 1.4 (0.06) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 0.5 (0.02) 5.0 0.3 (0.20) 10 0.2 (0.39) 1.4 (0.06) 0.1 (0.004) 6.5 0.2 (0.26) 4.5 (0.18) 6.5 0.2 (0.26) 5.08 (0.20) 0.15 (0.01) 5.0 0.3 (0.20) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) r0.2 10 0.2 (0.39) 0.4 (0.02) 0.5 (0.02) 0.1 (0.004) 3.5 (0.14) type contact form coil rating contact ratings G6K-2F dpdt 3 to 24 vdc 0.3a, 125vac g6k-2g 0.5a, 60vdc g6k-2p 1a, 30vdc
g6k g6k 4 n accessories n tape and reel dimensions relays in tube packing are arranged so that the orientation mark of each relay is on the left side. be sure to reference relay orienta- tion when mounting the relay to the pcb. l tape type: etx7200 (eiaj - electronic industrial association of japan) l 16mm tape meets eia standards 5.6mm pocket depth 12mm pitch 4mm sproket pitch l reel type: rpm-16d (eiaj), 330mm l relays per reel: 900 tube packing standard nomenclature 50 pcs per anti-static tube tape packing when ordering, add "tr" before the rated coil voltage (e.g., g6k-2g- tr -dc5) note: tr is not part of the relay model number and will not be marked on the relay omron electronics, inc. omron canada, inc. one east commerce drive 885 milner avenue schaumburg, il 60173 scarborough, ontario m1b 5v8 1-800-55-omron 416-286-6465 cat. no. k106-e3-1 7/98/5m specifications subject to change without notice. printed in the u.s.a. 1. direction of relay insertion 3. carrier tape dimensions G6K-2F 2. reel dimensions g6k-2g carrier tape top tape (cover tape) emboss tape orientation mark pulling direction
|
