type: ind. prox. switch housing style housing size housing material housing length detection principle sensing distance output type output configuration high temperature specifications are subject to change without notice (07.12.00) 1 types ia, m5, 8, npn/pnp high temperature proximity sensors inductive ? stainless steel housings ? sensing distance: 0.8 - 1 mm ? power supply: 10 to 30 vdc ? output: transistor npn or pnp, make switching ? for flush mounting ? 2 m silicone cable product description inductive proximity sensor with transistor output in m5 and m8 stainless steel housing for flush mounting in metal. output configuration for npn/pnp with no as stan- dard. connection with 2 m silicone cable. type selection rated connection housing ordering no. ordering no. operating type dimensions transistor npn transistor pnp dist. (s n ) make switching make switching 0.8 mm cable, 2 m m5 ia 05 bsf 08 noht-k ia 05 bsf 08 poht-k 1.0 mm cable, 2 m m8 ia 08 bsf 10 noht-k ia 08 bsf 10 poht-k all types for flush mounting in metal specifications rated operational volt. (u b ) 10 to 30 vdc (ripple included) ripple 10% rated operational current (i e ) continuous 50 ma @ + 25c (+75f) no-load supply current (i o ) 5 ma (on) voltage drop (u d ) < 3,0 v (@ i max ) frequency of op. cycles (f) ?5: 3 khz ?8: 2 khz effective operating dist. (s r ) 0.9 x s n s r 1.1 x s n usable operating dist. (s u ) 0.85 x s r s u 1.15 x s r ordering key ia 05 bsf 08 no ht-k ambient temperature operating -25 to +120c (-13 to +248f) storage -30 to +125c (-22 to +257f) degree of protection ip 67 (nema 1, 3, 4, 6, 13) housing material stainless steel ce-marking ye s connection cable, silicone, 2 m, awg 26
2 specifications are subject to change without notice (07.12.00) ia m5, 8, npn/pnp ia 05 bsf 08 .oht-k ia 08 bsf 10 .oht-k dimensions 25 30 m5 x 0,5 45 m8 x 1 installation hints relief of cable strain protection of the sensing face switch mounted on mobile carrier to avoid interference from inductive voltage/ current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables incorrect correct the cable should not be pulled a proximity switch should not serve as mechanical stop any repetitive flexing of the cable should be avoided wiring diagrams + - 1 bn 4 bk 3 bu + - 1 bn 4 bk 3 bu npn - make switching pnp - make switching
|
