2007-04-19 1 bas3005a... low vf schottky diode ? forward current: 0.5 a ? reverse voltage: 30 v ? very low forward voltage (typ. 0.45 v @ i f = 0.5 a) ? for low loss, fast-recovery protecting and clamping applications ? pb-free (rohs compliant) package 1) ? qualified according aec q101 BAS3005A-02V type package configuration marking BAS3005A-02V* sc79 single 2 * preliminary data maximum ratings at t a = 25c, unless otherwise specified parameter symbol value unit diode reverse voltage 2) v r 30 v forward current 2) i f 500 ma average rectified forward current (50/60hz, sinus) i fav 500 ma repetitive peak forward current ( t p 1 ms, d 0.25) i frm 3.5 a non-repetitive peak surge forward current (t 10 ms) i fsm 5 junction temperature t j 150 c operating temperature range t o p -55 ... 125 storage temperature t st g -65 ... 150 1 pb-containing package may be available upon special request 2 for t a > 25 c the derating of vr and if has to be considered.
2007-04-19 2 bas3005a... thermal resistance parameter symbol value unit junction - soldering point 1) r thjs tbd k/w electrical characteristics at t a = 25c, unless otherwise specified parameter symbol values unit min. typ. max. dc characteristics reverse current 2) v r = 5 v v r = 10 v v r = 30 v i r - - - - - - 15 30 300 a forward voltage 2) i f = 1 ma i f = 10 ma i f = 100 ma i f = 500 ma v f - - - - 200 260 340 450 260 310 390 500 mv ac characteristics diode capacitance v r = 5 v, f = 1 mhz c t - 10 15 pf 1 for calculation of r thja please refer to application note thermal resistance 2 pulsed test: t p = 300 s; d = 0.01
2007-04-19 3 bas3005a... diode capacitance c t = ? (v r ) f = 1mhz 0 5 10 15 20 v 30 v r 0 5 10 15 20 25 pf 35 c t reverse current i r = ? ( t a ) v r = parameter 0 25 50 75 100 c 150 t a -6 10 -5 10 -4 10 -3 10 -2 10 a i r 30 v 20 v 10 v 5 v reverse current i r = ? ( v r ) t a = parameter 0 5 10 15 20 v 30 v r -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 a i r 25 c 85 c 125 c forward voltage v f = ? ( t a ) i f = parameter -50 -25 0 25 50 75 100 c 150 t a 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 v 0.5 v f 1 ma 10 ma 100 ma 500 ma
2007-04-19 4 bas3005a... forward current i f = ? ( v f ) t a = parameter 0 0.1 0.2 0.3 0.4 v 0.6 v f -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 a i f 125 c 85 c 25 c - 40 c
2007-04-19 5 bas3005a... package sc79 package outline foot print marking layout (example) standard packing reel ?180 mm = 3.000 pieces/reel reel ?180 mm = 8.000 pieces/reel (2 mm pitch) reel ?330 mm = 10.000 pieces/reel 0.1 1.6 0.3 1 2 marking cathode 0.8 0.1 10 ? max. 0.1 1.2 a 0.05 10 ? max. 0.13 a 0.2 m +0.05 -0.03 0.04 0.55 0.05 0.2 0.35 0.35 1.35 bar63-02v type code cathode marking laser marking 2 0.66 0.93 0.4 1.33 1.96 8 0.2 cathode marking 4 cathode marking standard reel with 2 mm pitch 2005, june date code
2007-04-19 6 bas3005a... date code marking for discrete packages with one digit (scd80, sc79, sc75 1) ) ces-code 1) new marking layout for sc75, implemented at october 2005. . month 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 01apapapapapap 02bqbqbqbqbqbq 03crcrcrcrcrcr 04d s dsd s dsd s ds 05e t ete t ete t et 06fufufufufufu 07gvgvgvgvgvgv 08h xhxh xhxh xhx 09jyjyjyjyjyjy 10k z kzk z kzk z kz 11l 2l4 l 2l4 l 2l4 12n 3n5n 3n5n 3n5
2007-04-19 7 bas3005a... edition 2006-02-01 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2007. all rights reserved. attention please! the information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|