saw components data sheet m 9352 m
2 nov 19, 1999 saw components m 9352 m 45,75 mhz if filter for audio applications data sheet plastic package sip5k standard n m/n features n tv if audio filter with pass band for sound carrier at 41,25 mhz terminals n tinned cufe alloy pin configuration 1 input 2 input - ground 3 chip carrier - ground 4 output 5 output type ordering code marking and package according to packing according to m 9352 m B39458-M9352-M100 c61157-a1-a15 f61074-v8067-z000 maximum ratings operable temperature range t a C25/+65 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 12 v between any terminals ac voltage v pp 10 v between any terminals dimensions in mm, approx. weight 1,0 g
3 nov 19, 1999 saw components m 9352 m 45,75 mhz if filter for audio applications data sheet characteristics reference temperature: t a = 25 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 50 w min. typ. max. insertion attenuation a reference level for the 41,25 mhz 14,9 16,4 17,9 db following data relative attenuation a rel 40,95 mhz 0,5 1,5 2,5 db 41,55 mhz C0,3 0,7 1,7 db 39,17 mhz 40,0 54,0 db picture carrier 45,75 mhz 46,0 59,0 db color carrier 42,17 mhz 20,0 28,0 db adjacent picture carrier 39,75 mhz 40,0 45,0 db adjacent sound carrier 47,25 mhz 46,0 62,0 db lower sidelobe 35,00 ... 39,75 mhz 36,0 41,0 db upper sidelobe 45,75 ... 55,00 mhz 42,0 52,0 db group delay ripple (p-p) dt 90 ns impedance at 41,25 mhz input: z in = r in || c in 0,1 || 24,2 k w || pf output: z out = r out || c out 1,2 || 8,3 k w || pf temperature coefficient of frequency tc f C72 ppm/k
4 nov 19, 1999 saw components m 9352 m 45,75 mhz if filter for audio applications data sheet frequency response
5 nov 19, 1999 saw components m 9352 m 45,75 mhz if filter for audio applications data sheet published by epcos ag surface acoustic wave components division, ofw e ue p.o. box 80 17 09, d-81617 mnchen ? epcos ag 1999. all rights reserved. a s far as patents or other rights of third parties are concerned, liability is only assumed for compo- nents per se, not for applications, processes and circuits implemented within components or assemblies. t he information describes the type of component and shall not be considered as assured characteristics. t erms of delivery and rights to change design reserved. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
|
