View IE-V850ES-G1_2698467.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

user?s manual target device v850es IE-V850ES-G1 in-circuit emulator document no. u16313ej1v0um00 (1st edition) date published march 2003 n cp(k) printed in japan ?
user?s manual u16313ej1v0um 2 [memo]
user?s manual u16313ej1v0um 3 v850es/sa2, v850es/sa3, v850es/kf1, v850es/kg1, and v850es/kj1 are trademarks of nec electronics corporation. windows is either a trademark or a registered trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation.
user?s manual u16313ej1v0um 4 caution this equipment is intended for indoor use only. before connecting the equipment to ac-mains the casing must be closed. the information in this document is current as of november, 2002. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the cust omer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
user ? s manual u16313ej1v0um 5 regional information ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. nec electronics america, inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 fax: 408-588-6130 800-729-9288 nec electronics hong kong ltd. hong kong tel: 2886-9318 fax: 2886-9022/9044 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-528-0303 fax: 02-528-4411 nec electronics shanghai, ltd. shanghai, p.r. china tel: 021-6841-1138 fax: 021-6841-1137 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 fax: 02-2719-5951 nec electronics singapore pte. ltd. novena square, singapore tel: 6253-8311 fax: 6250-3583 j02.11 nec electronics (europe) gmbh duesseldorf, germany tel: 0211-65 03 01 fax: 0211-65 03 327 sucursal en espa ? a madrid, spain tel: 091-504 27 87 fax: 091-504 28 60 v lizy-villacoublay, france tel: 01-30-67 58 00 fax: 01-30-67 58 99 succursale fran ? aise filiale italiana milano, italy tel: 02-66 75 41 fax: 02-66 75 42 99 branch the netherlands eindhoven, the netherlands tel: 040-244 58 45 fax: 040-244 45 80 tyskland filial taeby, sweden tel: 08-63 80 820 fax: 08-63 80 388 united kingdom branch milton keynes, uk tel: 01908-691-133 fax: 01908-670-290 some information contained in this document may vary from country to country. before using any nec electronics product in your application, piease contact the nec electronics office in your country to obtain a list of authorized representatives and distributors. they will verify:
user?s manual u16313ej1v0um 6 introduction target readers this manual is intended for users who design and develop application systems using v850es microcontrollers. purpose debugging can be performed efficiently with this emulator (IE-V850ES-G1) connected to a dedicated emulation board when designing and developing application systems using v850es microcontrollers. the purpose of this manual is to describe the proper operation of the ie- v850es-g1 and its basic specifications. organization this manual is broadly divided into the following parts. overview names and functions of parts connection of parts factory settings how to read this manual it is assumed that the reader of this manual has general knowledge in the fields of electrical engineering, logic circuits, and microcontrollers. to learn about the basic specifications and operation read this manual in the order listed in the contents . to learn the operation methods, command functions, etc., of the IE-V850ES-G1 read the user?s manual of the debugger (sold separately) that is used. conventions note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information numeral representation: binary ? or b decimal ... hexadecimal ... h prefix representing a power of 2 (address space, memory capacity): k (kilo): 2 10 = 1024 m (mega): 2 20 = 1024 2 terminology the meanings of terms used in this manual are listed below. target device this is the device to be emulated. target system the system (user-built system) to be debugged. this includes the target program and hardware configured by the user. emulation cpu cpu that executes the program created by the user in the emulator.
user?s manual u16313ej1v0um 7 related documents when using this manual, refer to the following manuals. the related documents (user?s manuals) indicated in this publication may include preliminary versions. however, preliminary versions are not marked as such. { documents related to development tools (user?s manuals) document name document number IE-V850ES-G1 (in-circuit emulator for v850es) this manual ie-703204-g1-em1 (in-circuit emulator option board for v850es/sa2 tm , v850es/sa3 tm ) to be prepared ie-703217-g1-em1 (in-circuit emulator option board for v850es/kf1 tm , v850es/kg1 tm , v850es/kj1 tm ) to be prepared operation u16053e c language u16054e pm plus u16055e ca850 ver.2.50 (c compiler package) assembly language u16042e id850 ver.2.50 (integrated debugger) operation windows tm based u16217e sm850 ver.2.50 (system simulator) operation windows based u16218e sm850 ver. 2.00 or later system simulator external parts user open interface specifications u14873e basics u13430e installation u13410e rx850 ver. 3.13 or later real-time os technical u13431e basics u13773e installation u13774e rx850 pro ver. 3.13 real-time os technical u13772e rd850 ver.3.01 task debugger u13737e rd850 pro ver.3.01 task debugger u13916e az850 ver.3.10 system performance analyzer u14410e pg-fp4 flash memory programmer u15260e caution the related documents listed above are subject to change without notice. be sure to use the latest version of each document for designing.
user?s manual u16313ej1v0um 8 contents chapter 1 overview .......................................................................................................... ............... 11 1.1 hardware configuration ...................................................................................................... ....... 12 1.2 features.................................................................................................................... .................... 13 1.3 function specifications..................................................................................................... ......... 14 1.4 hardware configuration ...................................................................................................... ....... 15 1.5 system configuration ........................................................................................................ ......... 16 1.6 contents in carton .......................................................................................................... ............ 17 1.7 setup....................................................................................................................... ...................... 19 1.7.1 when using the emulator on a stand-alone basis for performing software debugging ......................19 1.7.2 when performing hardware debugging with target system................................................................20 chapter 2 part names and functions................................................................................... 21 2.1 part names and functions of IE-V850ES-G1............................................................................ 21 2.2 clock settings .............................................................................................................. ............... 24 2.3 cpu operating voltage range................................................................................................. .. 24 2.4 cover open/close procedure .................................................................................................. .. 25 2.4.1 removing probe and replacing clock module ................................................................................. ...25 2.4.2 replacing board........................................................................................................... ......................27 2.4.3 closing cover ............................................................................................................. ........................29 chapter 3 connection of components ................................................................................. 30 3.1 connection to personal computer ............................................................................................ 3 0 3.1.1 overview of connection.................................................................................................... ..................30 3.1.2 connection procedure...................................................................................................... ..................30 3.1.3 insertion of pc interface board ........................................................................................... ...............31 3.1.4 connection of pc interface cable .......................................................................................... ............32 3.2 connection to target system ................................................................................................. ... 33 3.3 connection of external logic probe ......................................................................................... 33 3.4 cabl e connections................................................................................................................... ... 35 3.4.1 connection of power supply cable .......................................................................................... ...........35 3.4.2 pc interface cable connection ............................................................................................. ..............36 3.4.3 external logic probe connection........................................................................................... ..............37 3.4.4 additional information .................................................................................................... ....................37 3.5 system power-on and power-off ............................................................................................... 38 3.5.1 power-on procedure ........................................................................................................ ..................38 3.5.2 power-off procedure ....................................................................................................... ...................38 chapter 4 factory settings ................................................................................................. ...... 39 4.1 factory settings ........................................................................................................... ............... 39 appendix a dimensions ....................................................................................................... ............. 40
user?s manual u16313ej1v0um 9 list of figures figure no. title page 1-1 basic hardware configuration................................................................................................ .........................15 1-2 system configuration ....................................................................................................... ...............................16 1-3 contents in carton ......................................................................................................... .................................17 1-4 accessories................................................................................................................ .....................................18 2-1 part names and functions of IE-V850ES-G1 on front side.................................................................... .......21 2-2 trgout signal connector.................................................................................................... .........................22 2-3 part names and functions of IE-V850ES-G1 on back side ...................................................................... .....23 2-4 part names and functions of board .......................................................................................... .....................24 2-5 cover open/close procedure 1 (removing front cover 1)...................................................................... ......25 2-6 cover open/close procedure 1 (after front cover 1 is removed) .............................................................. ..26 2-7 cover open/close procedure 2 (loosening screws) ............................................................................. ........27 2-8 cover open/close procedure 2 (pulling up front cover 2) .................................................................... ........28 2-9 cover open/close procedure 2 (after front cover is pulled up) .............................................................. .....29 3-1 rear view of pc............................................................................................................ ..................................31 3-2 inserting pc interface board ............................................................................................... ............................31 3-3 connection of pc interface board and pc interface cable .................................................................... ........32 3-4 connection of external logic probe......................................................................................... .......................33 3-5 external logic probe connector pins ........................................................................................ .....................34 3-6 connection of power supply cable........................................................................................... ......................35 3-7 pc interface cable connection.............................................................................................. .........................36
user?s manual u16313ej1v0um 10 list of tables figure no. title page 3-1 pins of external logic probe connector...................................................................................... ....................34 3-2 electrical characteristics of external logic probe connector ................................................................ .........34 4-1 factory settings of switches ................................................................................................ ...........................39
user?s manual u16313ej1v0um 11 chapter 1 overview the IE-V850ES-G1 is an in-circuit emulator that efficiently debugs hardware and software during the development of systems that employ v850es microcontrollers. this in-circuit emulator incorporates functions such as a break/trace function using events, a coverage function for program performance evaluation, and a timer/counter function. to perform debugging, the emulation board (sold separately) corresponding to the relevant device must be connected.
chapter 1 overview user?s manual u16313ej1v0um 12 1.1 hardware configuration emulation board (ie-70xxxx-g1-em1) the IE-V850ES-G1 can be used as an in-circuit emulator of each v850es device by connecting this board. a probe cable is supplied with the board (except some emulation boards). probe socket (ev-70xxxxxxxx) deducated probe socket pc interface board ie-70000-cd-if-a ie-70000-pci-if-a these boards are used to connect the ie-v850es- g1 to a personal computer. these boards are added into the expansion slot of a personal computer. ie-70000-pci-if-a: for pci bus ie-70000-cd-if-a: for pcmcia socket in-circuit emulator (IE-V850ES-G1) separately sold hardware
chapter 1 overview user?s manual u16313ej1v0um 13 1.2 features { maximum operating frequency: 20 mhz { a configuration that provides the highest possible equivalence with the target device is realized by omitting buffers between signal lines. { the following pins can be masked (although these differ depending on the emulation board to be used). reset, nmi, wait, hldrq { the dimensions and environmental conditions for operation are as follows. parameter value maximum operating frequency 20 mhz supply voltage ac 100 to 240 v power consumption 50 w (max.) height 210 mm width 105 mm external dimensions (refer to appendix a dimensions ) depth 249 mm weight 2400 g operating temperature range 0 to 40 c storage temperature range 0 to 45 c ambient humidity range 10 to 80% rh
chapter 1 overview user?s manual u16313ej1v0um 14 1.3 function specifications item specification internal rom 1 mb emulation memory capacity external memory 4 mb internal rom 1 mb in romless mode 2 mb execution/pass detection coverage memory capacity external memory when using irom 1 mb trace memory capacity 168 bits 32 kframes time measurement function measurement enabled with time tag or three timers 8-bit external trace possible external logic probe trace/break event setting possible event break step execution break forced break break function fail safe break illegal access to peripheral i/o access to guard space write into rom space caution some of the functions may not be supported depending on the debugger used.
chapter 1 overview user?s manual u16313ej1v0um 15 1.4 hardware configuration the basic hardware configuration of the IE-V850ES-G1 is as follows. figure 1-1. basic hardware configuration trace memory i/o chip osc probe target system emulation cpu irom memory coverage memory host machine emulation memory v850es in-circuit emulator IE-V850ES-G1 (emulator main unit) clk emulation board
chapter 1 overview user?s manual u16313ej1v0um 16 1.5 system configuration the system configuration when connecting the emulation board to the IE-V850ES-G1, which is then connected to a personal computer (pc-9800 series, pc/at tm or compatibles) is illustrated below. figure 1-2. system configuration [magnified drawing: example of use of connector for target connection] target system target system <9> <12> <8> <7> <10> <1> <2> <4> <3> <6> <11> <5> <8> <9> remark <1> personal computer (pc-9800 series, pc/at or compatibles) <2> debugger (sold separately), device file (available separately) note 1 <3 > pc interface board (ie-70000-pci-if-a, ie-70000-cd-if-a: sold separately) <4> two types of pc interface cables (included) <5> IE-V850ES-G1 (this product) <6> emulation board (sold separately) <7> prove cable note 2 <8> conversion adapter note 2 <9> target connector note 2 <10> three types of power cables (included) <11> external logic probe (included) <12> external logic clip (included) notes 1. the device file can be downloaded from the website of nec electronics (http://www.necel.com/micro). 2. for the probe cable, conversion adapter, and target connector, refer to the user ? s manual of the emulation board.
chapter 1 overview user ? s manual u16313ej1v0um 17 1.6 contents in carton the carton of the IE-V850ES-G1 contains a main unit, guarantee card, packing list, and accessory bag. make sure that the accessory bag includes this manual and cables. in case of missing or damaged contents, please contact an nec electronics sales representative or an nec electronics distributor. figure 1-3. contents in carton <1> IE-V850ES-G1 <4> packing list <3> guarantee card <2> accessory bag <1> IE-V850ES-G1 1 <2> accessory bag 1 <3> guarantee card 1 <4> packing list 1
chapter 1 overview user ? s manual u16313ej1v0um 18 check that the accessory bag contains this manual, an accessory list, and the following accessories. (a) pc interface cable (for pci bus, for pcmcia): 1 each (b) power cable: 3 types, 1 each (c) external logic probe: 1 (d) external logic clips: 1 set (10 clips) figure 1-4. accessories (c) external logic prove (d) external logic clips (a) pc interface cable (for pci bus, for pcmcia) (b) power cable
chapter 1 overview user ? s manual u16313ej1v0um 19 1.7 setup the following two system configurations for the IE-V850ES-G1 are possible, depending on the purpose. this section describes the setup procedure according to each purpose as follows. step reference section 1.7.1 when using the emulator on a stand-alone basis for performing software debugging (1) connect interface board to pc 3.1 connection to personal computer before connecting, turn off the pc. (2) connect emulation board refer to the user ? s manual of the emulation board (3) set operation clock of emulator refer to the user ? s manual of the emulation board (4) connect pc interface cable 3.4 cable connections connect cable. (5) power up pc, then IE-V850ES-G1 3.5 system power-on and power-off
chapter 1 overview user ? s manual u16313ej1v0um 20 1.7.2 when performing hardware debugging with target system (1) connect interface board to pc 3.1 connection to personal computer before connecting, turn off the pc. (2) connect emulation board refer to the user ? s manual of the emulation board (3) set operation clock of emulator refer to the user ? s manual of the emulation board (4) connect pc interface cable 3.4 cable connections connect cable. (5) connect ie-v850s-g1 to target system 3.2 connection to target system (6) power up pc, then IE-V850ES-G1, then target system 3.5 system power-on and power-off caution before turning on the power of the target system, make sure that the power of the ie-v850es- g1 is turned on. if the target system is turned on while the IE-V850ES-G1 is off, the target system or the IE-V850ES-G1 may be damaged.
user?s manual u16313ej1v0um 21 chapter 2 part names and functions this chapter describes the name and function of each part of the IE-V850ES-G1, as well as switch settings. 2.1 part names and functions of IE-V850ES-G1 figure 2-1 part names and functions of IE-V850ES-G1 on front side leds probe access ventilation external logic probe connector trgout signal connector (1) leds ? power (red): turns on/off when the power switch is turned on/off. on: lit off: off ? target (amber): indicates the status of the target power supply. power supplied to target: lit power not supplied to target: off ? status (green): indicates various statuses of the emulator. indication varies depending on the emulation board to be connected. for details, refer to the user ? s manual of the emulation board.
chapter 2 part names and functions user ? s manual u16313ej1v0um 22 (2) external logic probe connector connect the external logic probe (included) to this connector. (3) trgout signal connector this connector comprises the trgout signal output and gnd pins. figure 2-2. trgout signal connector gnd pin trgout signal output pin (open-drain output, 5 v tolerant)
chapter 2 part names and functions user?s manual u16313ej1v0um 23 figure 2-3. part names and functions of IE-V850ES-G1 on back side fan power switch power cable jack fuse holder connector for pc interface reset switch (1) power switch this is the main power supply switch of the emulator. i: on o: off (2) fuse holder set the fuse here. rating: 250 v, 3.15 a (3) power cable jack connect the power cable (included) here. (4) connector for pc interface connect the pc interface cable (included) here. (5) reset switch this is the switch for resetting the IE-V850ES-G1.
chapter 2 part names and functions user ? s manual u16313ej1v0um 24 figure 2-4. part names and functions of board cn2 cn3 cn1 fpga fpga ? pd703191 jp4 jp5 jp7 jp6 jp3 (1) jumpers (jp3 to jp7) jumper setting is not required. do not change the factory settings. if the user ? s manual of the emulation board describes the setting of jp3 to jp7 of the IE-V850ES-G1, follow the setting described in the manual. (2) connectors for connecting emulation board (cn1 to cn3) these connectors are for connecting the emulation board (sold separately). 2.2 clock settings for the operation clock settings of the IE-V850ES-G1, refer to the user ? s manual of each emulation board. 2.3 cpu operating voltage range for the cpu operating voltage range, refer to the user ? s manual of each emulation board.
chapter 2 part names and functions user ? s manual u16313ej1v0um 25 2.4 cover open/close procedure 2.4.1 removing probe and replacing clock module <1> place your fingers at the positions indicated by the arrows below and pull front cover 1. figure 2-5. cover open/close procedure 1 (removing front cover 1) front cover 1
chapter 2 part names and functions user ? s manual u16313ej1v0um 26 <2> remove the probe or change the clock in the status shown below. figure 2-6. cover open/close procedure 1 (after front cover 1 is removed) front cover 1
chapter 2 part names and functions user ? s manual u16313ej1v0um 27 2.4.2 replacing board <1> remove front cover 1 following the procedures described in 2.4.1 removing probe and replacing clock module. <2> loosen the two screws indicated by the arrows below. figure 2-7. cover open/close procedure 2 (loosening screws)
chapter 2 part names and functions user ? s manual u16313ej1v0um 28 <3> grip and pull up front cover 2 with the hinge installed on the rear panel as the center, and rotate the casing main unit as shown. figure 2-8. cover open/close procedure 2 (pulling up front cover 2) front cover 2
chapter 2 part names and functions user ? s manual u16313ej1v0um 29 <4> remove the six screws on the board indicated by the arrows and replace the board. for replacement of the emulation board, refer to the user ? s manual of each emulation board. figure 2-9. cover open/close procedure 2 (after front cover is pulled up) 2.4.3 closing cover close the cover in the reverse procedure as that used when opening the cover.
user?s manual u16313ej1v0um 30 chapter 3 connection of components the IE-V850ES-G1 enables debugging and programming of target devices by connecting several components and configuring the desired system. this chapter describes the various components and their connection. read this chapter when connecting system components. for the sequence of system configuration, refer to 1.7 setup . for the details on software startup, refer to the user?s manual of the debugger that is used. 3.1 connection to personal computer 3.1.1 overview of connection the IE-V850ES-G1 can use a personal computer (pc-9800 series, or pc/at compatible) as the host machine. the connection to each type of personal computer is described below. (1) desktop pc when using a desktop pc, insert the following pc interface board in the external expansion slot of the desktop pc and connect the computer to the IE-V850ES-G1. ? ie-70000-pci-if-a: for pci bus (can also be used in a pc98-nx series, pc/at or compatible) (2) notebook-type personal computer when using a notebook-type personal computer, insert the interface card (ie-70000-cd-if-a: sold separately) in the pc card slot of the computer and connect the computer to the IE-V850ES-G1. 3.1.2 connection procedure (1) powering off perform connection while the power of each unit is off. before connecting, turn off the power of the IE-V850ES-G1 and the pc. (2) pc interface board setting when the ie-70000-pci-if-a is shipped, an 8-bit connector board is premounted. however, when the ie- v850es-g1 is connected, this must be changed to a 32-bit connector board. the 32-bit connector board is supplied with the ie-70000-pci-if-a. for details, refer to the ie-70000-pci-if-a user?s manual.
chapter 3 connection of components user?s manual u16313ej1v0um 31 3.1.3 insertion of pc interface board the following describes the settings and connection of an ibm pc/at (including its compatibles) and the ie- 70000-pci-if-a. figures 3-1 and 3-2 show how to mount the pc interface board. <1> before starting, turn off the power of the pc. <2> remove the casing of the pc. <3> remove the cover of the pci bus slot. figure 3-1. rear view of pc remove the cover <4> insert the pc interface board. <5> fix the pc interface board by fastening the screws. figure 3-2. inserting pc interface board fasten the screws <6> replace the casing of the pc.
chapter 3 connection of components user ? s manual u16313ej1v0um 32 3.1.4 connection of pc interface cable figure 3-3 shows how to connect the pc interface cable. connect the pc interface cable (for pci bus) supplied with the IE-V850ES-G1 to the pc interface connector of the pc interface board. figure 3-3. connection of pc interface board and pc interface cable pc interface connector pc interface cable
chapter 3 connection of components user ? s manual u16313ej1v0um 33 3.2 connection to target system for how to connect the IE-V850ES-G1 and target system, refer to the user ? s manual of the emulation board. 3.3 connection of external logic probe when using the external logic probe, connect it to the external logic probe connector of the IE-V850ES-G1. connect the external logic clips to the tips of the external logic probe. figure 3-4. connection of external logic probe external logic probe external logic probe connector external logic clip
chapter 3 connection of components user ? s manual u16313ej1v0um 34 figure 3-5. external logic probe connector pins <1> <10> table 3-1. pins of external logic probe connector pin no. <1> <2> <3> <4> <5> <6> <7> <8> <9> <10> description bit 0 bit 1 bit 2 bit 3 bit 4 bit 5 bit 6 bit 7 no connection gnd table 3-2. electrical characteristics of external logic probe connector parameter min. [v] max. [v] input voltage, high target voltage 0.7 target voltage input voltage, low 0 target voltage 0.3
chapter 3 connection of components user?s manual u16313ej1v0um 35 3.4 cabl e connections 3.4.1 connection of power supply cable connect the connector of the power supply cable (included) to the power supply cable jack on the main unit of the IE-V850ES-G1. figure 3-6. connection of power supply cable power switch power supply cable jack power supply cable (included)
chapter 3 connection of components user ? s manual u16313ej1v0um 36 3.4.2 pc interface cable connection connect the pc interface cable to the pc interface connector of the IE-V850ES-G1. figure 3-7. pc interface cable connection pc interface connector pc interface cable (included)
chapter 3 connection of components user ? s manual u16313ej1v0um 37 3.4.3 external logic probe connection when using the external logic probe, connect it to the external logic probe connector. for details, refer to the emulation board user ? s manual. 3.4.4 additional information the IE-V850ES-G1 can perform real-time tracing of the emulation cpu bus cycle. for details of this function, refer to the debugger user ? s manual. (1) any eight signals can be traced in real-time. (2) tracer start/stop is enabled using any eight signals. (3) break setting is enabled using any eight signals. cautions 1. connect the external logic probe only to a ttl-level signal line. high level and low level cannot be detected correctly if connected to lines other than ttl-level signal lines. note that the sensor of the IE-V850ES-G1 and emulation board may be damaged by an excessive voltage level. 2. when connecting the external logic probe, use the included external logic clips. procedure (1) turn off the power of the target system. (2) turn off the power of the IE-V850ES-G1. (3) connect the external logic probe to any device on the target system. (4) connect the gnd of the external logic probe to the gnd of the target system.
chapter 3 connection of components user ? s manual u16313ej1v0um 38 3.5 system power-on and power-off after connecting the IE-V850ES-G1 and each system component (pc, target system, etc.), start up and shut down the system using the following procedure. 3.5.1 power-on procedure cautions 1. make sure that the IE-V850ES-G1 is correctly connected to the pc. 2. if the IE-V850ES-G1 is powered on or the system is terminated using a procedure other than the following, the IE-V850ES-G1 or the target system may be damaged. (1) turn on the power switch of the pc. (2) turn on the power switch of the IE-V850ES-G1. set the power switch to ? on ? after connecting the power cable to the power jack of the IE-V850ES-G1 and the plug to the power outlet. (3) turn on the power of the target system. (4) start the debugger. 3.5.2 power-off procedure (1) terminate the debugger. (2) turn off the power switch of the target system. (3) turn off the power switch of the IE-V850ES-G1. (4) turn off the power switch of the pc.
user?s manual u16313ej1v0um 39 chapter 4 factory settings this chapter describes the switch settings when the product is shipped. 4.1 factory settings table 4-1. factory settings of switches setting description power switch off power off jumper (jp3) shorted leave the setting. jumper (jp4) open leave the setting. jumper (jp5) shorted leave the setting. jumper (jp6) shorted leave the setting. jumper (jp7) open leave the setting.
user?s manual u16313ej1v0um 40 appendix a dimensions 249 105 3.6 108.6 210 231.6 18 3.6

▲Up To Search▲

Price & Availability of IE-V850ES-G1

	To Download IE-V850ES-G1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .