part number : LUGR02M published date : mar 19,2008 drawing no :sdsa3174 v3 checked : b.l.liu p.1/5 10mm round led lamp www.sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. features z uniform light output. z low power consumption. z 3 leads with one common cathode lead. z i.c. compatible. z long life - solid state reliability. z rohs compliant. absolute maximum ratings (t a =25c ) ur (gaasp/ gap) ug (gap) unit forward current i f 30 25 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 140 ma power dissipation p t 75 62.5 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds reverse voltage v r 5 5 v operating characteristics (t a =25c ) ur (gaasp/ gap) ug (gap) unit forward voltage (typ.) (i f =20ma) v f 2.0 2.2 v forward voltage (max.) (i f =20ma) v f 2.5 2.5 v wavelength of peak emission (typ.) (i f =20ma) p 627 565 nm wavelength of dominant emission (typ.) (i f =20ma) d 625 568 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 45 30 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 15 pf reverse current (max.) (v r =5v) i r 10 10 ua part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUGR02M red gaasp/gap white diffused 36 79 627 green gap 18 49 565 50
part number : LUGR02M published date : mar 19,2008 drawing no :sdsa3174 v3 checked : b.l.liu p.2/5 10mm round led lamp www.sunled.com ? ur
part number : LUGR02M published date : mar 19,2008 drawing no :sdsa3174 v3 checked : b.l.liu p.3/5 10mm round led lamp www.sunled.com ? ug
part number : LUGR02M published date : mar 19,2008 drawing no :sdsa3174 v3 checked : b.l.liu p.4/5 10mm round led lamp www.sunled.com remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
part number : LUGR02M published date : mar 19,2008 drawing no :sdsa3174 v3 checked : b.l.liu p.5/5 10mm round led lamp www.sunled.com packing & label specifications LUGR02M
|