electronic control gear quicktronic? for fh lamps, two-lamp version qt-fh 2x14/230-240 page 1 l l l n 1 2 3 6 4 7 5 reference : qt-fh 2x14/230-240 for lamp : 2x fh 14 w mains voltage [v] : 230/240 permissible voltage fluctuations [v] : 198 - 254 permissible battery voltage [v] : 176 - 254 lamp start : warm start within 2 s mains frequency [hz] : 0/50 - 60 operating frequency [khz] : approx. 40 mains current [a] : 0,13 power factor [c] : 0,99 system wattage [w] : 30,5 luminous flux [lm] : 2 x 1350 temperature range [c] : -15 - +50 radio interference suppression : to din vde 0875/cispr 15/en 55015 harmonics : to din vde 0712 part 23/iec 929/en 61000-3-2 immunity : to en 61547 length l [mm] : 359 width b [mm] : 30 height h [mm] : 30 distance between holes a [mm] : 350 standard pack [pcs] : 20 weight [g] : 270 ean 40 50300 : 434742 quicktronic? for t5/16 mm diameter fluorescent lamps are electronic high-frequency control gear. t5/16 mm diameter fluorescent lamps represent a new generation of lighting systems. they combine compact lamp dimensions (16 mm diameter) with slim ecgs with small cross-sections, giving luminaire manufacturers enormous freedom to design stylish luminaires with excellent directional lighting. t5/16 mm diameter fluorescent lamps can only be operated with electronic control gear. there are two system families: 1. quicktronic? qt-fh available in 14w, 21w, 28w and 35w models. designed for maximum luminous efficacy (104 lm/w). 2. quicktronic? qt-fq available in 24w, 39w, 54w and 80w models. designed for maximum luminous flux (up to 7000 lm for fq 80w). comfort: flicker-free ignition
electronic control gear quicktronic? for fh lamps, two-lamp version qt-fh 2x14/230-240 page 2 pleasant, flicker-free light with no stroboscopic effects thanks to high-frequency operation comfortable lighting with no distracting hum thanks to fully electronic operation no flashing or flickering; the electronic fault monitoring circuit disconnects defective lamps. economy: . very high system luminous efficacy with the fh? system, thanks in particular to cut-off technology . high luminous flux with the fq? system long life because the lamp is not exposed to high stresses thanks to cut-off technology low maintenance costs thanks to long life and longer relamping intervals reduced load on air conditioning systems because less power is dissipated. safety: safety shutdown of defective lamps compliance with european standards for safety, operation and emc overvoltage protective cutout for short-duration voltage pulses (to din vde 160) for temporary overvoltages greater fire protection because lamps operate at lower temperatures and luminaires can be constructed to meet en 60598/din vde 0710 and din vde 0711 standards can be used in emergency lighting systems to din vde 0108. applications: fh? system: efficient office lighting, display cabinet lighting, strip lighting fq? system: direct/indirect lighting, industrial lighting general: - supply voltage: 230v/240v - mains frequency: 0/50 to 60 hz - lamp start: warm start within 2 s - radio interference suppression: to din vde 0875/cispr 15/en 55015 - mains harmonics: to din vde 0712 part 23/iec 929/en 61000-3-2 - immunity to en 61547 same luminous flux for ac and dc operation. battery voltage may drop to 176 v. lamps must be ignited at over 198 v however.
|
