40 dc subminiature switch dimensions in mm 6,5 ?,2 9,53 5,16 7,5 7,5 2,73 2,54 2,25 2,35 6,65 max. 7,7 7,5 4,85 max. 20 rest position operating point max. 9,3 8,4 0,3 6,9 6,05 features - enclosed switch comply- ing with ip 6k7 - silicon-free version availa- ble - models available for ope- rating temperatures up to 120 c - rated for currents up to 10 a at 250 v ac - range of auxiliary actua- tors available (can also be retrofitted) - various contact materials available, depending on application - mechanical life: min. 1 x 10 6 operations - wide variety of connec- tion options - numerous approvals contact configuration s.p.d.t, s.p.s.t. - n.o., s.p.s.t. - n.c. contact gap < 3 mm (? switching voltage (max.) 250 v ac switched current (max.) 0.1 to 10 a ac (see table) operating force 200 to 340 cn without aux. actuator, depend. on model total actuator travel ca. 1.6 mm mechanical life min. 1 x 10 6 operations electrical life min. 1 0 000 operations in compliance with vde 0630 ambient temperature - 40 c to + 85 c /+120 c model with leads - 40 c to + 105 c proof tracking index pti 175, pti 250 on request materials housing pet / pbt (ul 94 v-0) actuator pom (t85), pbt (t120) contacts dc1, dc2, dc4 agni dc3 auagpt (crosspoint) terminals cuzn (silver-plated) auxiliary actuator stainless steel or plastic sealing gasket si (vmq) silicon-free alternative avail. leads cu (pvc-sheathed) approvals depending on model degree of protection ip6k7 (switch interior) technical specifications
41 ?1,3 7,3 q.c. terminals 2.8 x 0.5, max. 30 twisted ?,6 7,5 7,5 drilling pattern for pcb terminals 1.3 x 0.5 ?? 0,8 sp rs 3,5 straight roller ?? 0,8 ?,8 5,5 3,3 simulated roller ?? 0,8 3,5 r 2,5 steel auxiliary actuator straight roller ?? 0,8 ?? 0,8 3,5 5,6 2,9 ?5 simulated roller ?? 0,8 3,5 r 2 plastic auxiliary actuator with/without adjusting screw ?,3 7,5 7,5 drilling pattern for lateral/ underside pcb terminals 0.6 x 0.5, w/o location pins special model available with tall pedestral on request ?,3 7,5 7,5 ?,15 9,53 2,73 5,08 drilling pattern for lateral pcb terminals 0.6 x 0.5, with location pins ?1,8 3,2 solder terminals, short max. 30 twisted 6,6 pcb terminals 1.3 x 0.5, max. 30 twisted 6,2 pcb terminals 0.6 x 0.5, max. 30 twisted 6,75 3,5 5,08 pcb terminals 0.6 x 0.5, rh-side w/o location pins top-down view of lateral terminals left right 3 5,08 3,5 6,75 pcb terminals 0.6 x 0.5, rh-side with location pins 6,75 3,5 5,08 pcb terminals 0.6 x 0.5, lh-side w/o location pins 3 5,08 3,5 6,75 pcb terminals 0.6 x 0.5, lh-side with location pins terminal options auxiliary actuator options no lead (blue) nc lead (grey) com lead (black) min. 500 max. 20 min. 500 rest position (rp) operating point (op) 4,85 7,5 ?,2 2,54 9,53 5,16 2,25 9,3 max. 8,4 0,3 6,9 6,05 max.7,7 6,65 max. 8,6 leads attached on actuator side leads attached on side opposite actuator model with connecting leads (ip 6k7) type a type b cut-out *sp = operating point (op) **rs = rest position (rp) * **
42 dc subminiature switch 24 v 3 a 5 a 2 a 4 a 60 v 1 a 1 a 0.5 a 0.5 a 12 v 6 a 10 a 6 a 10 a 110 v 0.5 a 0.5 a 0.2 a 0.2 a 220 v 0.25 a 0.25 a 0.1 a 0.1 a switched current inductive load resistive load (l/r = 3 ms) switching voltage dc 1 dc 2 dc 1 dc 2 contact rating at direct voltage contact configuration operating temperature + 85? code s.p.s.t.-n.o. e s.p.s.t.-n.c. f s.p.d.t. g operating temperature+120 c (with leads +105 c) code s.p.s.t.-n.o. a s.p.s.t.-n.c. b s.p.d.t. c contact configuration c type of terminals with standard pedestral code short solder terminals* a1 pcb terminals 1.3 x 0.5, straight* h1 pcb terminals 0.6 x 0.5, straight* k1 pcb terminals 0.6 x 0.5, right-hand side** k8 pcb terminals 0.6 x 0.5, left-hand side** k9 pcb terminals 0.6 x 0.5, right-hand side*** k6 pcb terminals 0.6 x 0.5, left-hand side*** k7 q.c. terminals 2.8 x 0.5, straight* l1 leads 0.5 mm 2 attached to underside b5 leads 0.5 mm 2 on actuator side b3 leads 0.5 mm 2 on opposite side from actuator b4 leads 0.75 mm 2 attached to underside c5 leads 0.75 mm 2 on actuator side c3 leads 0.75 mm 2 on opposite side from actuator c4 without leads (type b) on actuator side/opposite* n3/n4 without leads (type a) on actuator side/opposite* p3/p4 without leads (no cut-out)* q5 * max. 30 twisted ** with location pins *** without location pins terminals d 6 a 250 v~ 5 a 125-250 v ac 10 000 6 000 2 x 10 6 200 1 10 (1.5) a, 250 v~ 10.1a,125-250vac 1/4hp,125v 10 000 6 000 1 x 10 6 340 2 0.1 a, 250 v~ +++ 0.1 a 125 v ac 50 000 6 000 2 x 10 6 200 3 3 a, 250 v~ +++ 3 a, 125-250 v ac 50 000 6 000 2 x 10 6 200 4 electrical rating electrical life (t85) according to at rated load mechanical max. vde 0630 ul acc. to vde acc. to ul life operating min. (operations) min.(operations) force (cn) code electrical rating and operating life b
43 auxiliary actuator options e auxiliary actuator type max. operating max. min. max. movement max. rest operating length of code option force pretravel overtravel differential position point aux. actuator (cn) (mm) (mm) (mm) (mm) (mm) (mm) ?.8 w/o dc 1, 3, 4 200 1.0 0.6 0.1 9.3 8.4?.3 ?a aux. actuator dc2 340 1.0 0.6 0.1 9.3 8.4?.3 straight dc 1, 3, 4 80 4.5 1.5 0.5 14.0 10.7?.3 4.8 lb aux. actuator dc2 150 5.0 1.5 0.7 14.0 10.7?.6 straight dc 1, 3, 4 70 5.0 1.5 0.6 15.0 11.1?.5 7.0 lc aux. actuator dc2 120 5.5 1.5 1.0 15.0 11.1?.8 straight dc 1, 3, 4 on request 42.0 ld aux. actuator dc2 sim. roller dc 1, 3, 4 90 4.5 1.5 0.5 19.0 16.0?.3 2.5 sb aux. actuator dc2 160 5.0 1.5 0.7 19.0 16.0?.6 sim. roller dc 1, 3, 4 80 5.0 1.5 0.6 20.0 16.4?.5 4.7 sc aux. actuator dc2 130 5.5 1.5 1.0 20.0 16.4?.8 sim. roller dc 1, 3, 4 on request 39.7 sd aux. actuator dc2 roller dc 1, 3, 4 90 4.5 1.5 0.5 19.0 15.8?.3 2.5 rb aux. actuator dc2 160 5.0 1.5 0.7 19.0 15.8?.6 roller dc 1, 3, 4 80 5.0 1.5 0.6 20.0 16.2?.5 4.7 rc aux. actuator dc2 130 5.5 1.5 1.0 20.0 16.2?.8 roller dc 1, 3, 4 on request 39.7 rd aux. actuator dc2 straight aux. dc 1, 3, 4 68 4.5 2.0 0.6 15.0 11.1?.5 7.0 wb actuator (plastic) dc2 115 4.5 2.0 0.6 15.0 11.1?.5 straight aux. dc 1, 2, 3 50 6.0 3.0 0.8 17.0 12.2?.8 14.0 wc actuator (plastic) dc2 85 6.0 3.0 0.8 17.0 12.2?.8 sim. roller aux. dc 1, 3, 4 73 4.5 2.0 0.6 15.0 11.9?.4 5.6 vb actuator (plastic) dc2 125 4.5 2.0 0.6 15.0 11.9?.4 roller auxiliary dc 1, 3, 4 73 4.5 1.5 0.6 19.0 16.0?.4 5.2 zb actuator (plastic) dc2 125 4.5 1.5 0.6 19.0 16.0?.4 dc subminiature switch g: t 85, s.p.d.t. lc: auxiliary actuator: 7.0 mm long from center of mounting hole 3: 0.1 a 250 v ac b3: leads, 0.5 mm 2 attached on actuator side example ordering code dc 3 g - b3 lc abcde
|
