pd7 series 0 , 75 ohm power dividers / combiners 50 to 90 mhz / 2, 4 & 8-way / excellent phase and amplitude balance / high output port isolat ion fo r f ur t he r infor ma tion con t ac t merr ima c / 41 fairfield pl., west caldwell, nj, 07006 / 973 -575-1300 / fax 973 -575-0531 principal specifications frequency quantity isolation, insertion amplitude phase vswr model range, of db, loss, balance, balance, in/out weight number mhz outputs max. db, max. db, max. max. max. oz.(g) PD7-20-70A 50 - 90 2 25 0.5 db 0.25 2 1.3:1 2.5 (70) pd7-40-70a 50 - 90 4 25 1.0 db 0.50 3 1.3:1 3.5 (100) pd7-80-70a 50 - 90 8 25 1.5 db 0.75 4 1.3:1 8.0 (228) available options true 75 w bnc connectors special frequency bands n-way where n 16 other packages ( pc, flatpack, to-5, sma) precision balance general specifications impedance: 75 w nom. cw input power: 3 w max. (when used as divider with 1.2:1 vswr out ) internal load dissipation: 250 mw max. bnc female connectors: 50 w type (to meet interface requirements of mil-c-39012) operating temp: -- 55 to +85c general notes: 1. the pd7 series covers 50 to 90 mhz with a broadband, lumped element design to minimize the baseb and amplitude and phase ripple. 2. these units are suitable applications in voice, data or television communication systems. 3. the pd7 series includes catalog standard, in-phase two, four and eight-way power dividers. in add ition, up to 16-way units are available in custom units. 16feb96 PD7-20-70A package outline notes: 1. tolerance on 3 place decimals 0.020(0.51) except as noted. 2. dimensions in inches over millimeters.
fo r f ur t he r infor ma tion con t ac t merr ima c / 41 fairfield pl., west caldwell, nj, 07006 / 973 -575-1300 / fax 973 -575-0531 notes: 1. tolerance on 3 place decimals 0.020(0.51) except as noted. 2. dimensions in inches over millimeters. package outline pd7-40-70a package outline pd7-40-70a pd7 series 0 , 75 ohm power dividers / combiners 50 to 90 mhz / 2, 4 & 8-way / excellent phase and amplitude balance / high output port isolat ion 16feb96 notes: 1. tolerance on 3 place decimals 0.020(0.51) except as noted. 2. dimensions in inches over millimeters.
|
