original creation date: 06/30/95 last update date: 09/26/96 last major revision date: 06/30/95 mjlm120-12-h rev 0bl microcircuit data sheet voltage regulator -12 volts at .5a ns part numbers JL120-12BXA jl120-12sxa industry part number lm120 prime die lm120 controlling document 38510/11502, amend.1 rev a processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1
mjlm120-12-h rev 0bl microcircuit data sheet electrical characteristics dc parameters symbol parameter conditions notes pin- name min max unit sub- groups vout output voltage vin = -15v, il = 5ma -12.6 -11.4 v 1, 2, 3 vin = -15v, il = 500ma -12.6 -11.4 v 1, 2, 3 vin = -27v, il = 5ma -12.6 -11.4 v 1, 2, 3 vin = -27v, il = 500ma -12.6 -11.4 v 1, 2, 3 vin = -35v, il = 5ma -12.6 -11.4 v 1, 2, 3 vin = -35v, il = 50ma -12.6 -11.4 v 1, 2, 3 vrline line regulation -35v < vin < -15v, il = 50ma -360 360 mv 1, 2, 3 -32v < vin < -15v, il = 350ma -120 120 mv 1, 2, 3 vrload load regulation vin = -17v, 5ma < il < 500ma -240 240 mv 1, 2, 3 vin = -35v, 5ma < il < 50ma -360 360 mv 1, 2, 3 iscd standby current drain vin = -17v, il = 5ma 0.5 3 ma 1, 2, 3 vin = -35v, il = 5ma 0.5 4 ma 1, 2, 3 delta iscd(line) standby current drain change (vs. line voltage) -35v < vin < -15v, il = 5ma -1 1 ma 1, 2, 3 delta iscd(load) standby current drain change (vs. load current) 5ma < il < 500ma, vin = -17v -0.5 0.5 ma 1, 2, 3 ios output short circuit current vin = -32v 0 1.5 a 1, 2, 3 vin = -35v 0 1 a 1, 2, 3 ipk peak output current forced delta vout = 1.13v, vin = -15v 0.5 2 a 1, 2, 3 vstart voltage startup vin = -27v, rl = 24 ohms -12.6 -11.4 v 1, 2, 3 vrth thermal regulation vin = -22v, il = 500ma -120 120 mv 1 vout output voltage vin = -17v, il = 5ma 1, 4 -12.72 -11.28 v 2 2
mjlm120-12-h rev 0bl microcircuit data sheet electrical characteristics ac parameters symbol parameter conditions notes pin- name min max unit sub- groups delta vin/delta vout ripple rejection vin = -17v, il = 125ma, ei = 1vrms at 2400hz 50 db 4, 5, 6 vno output noise voltage vin = -17v, il = 50ma 600 uvrms 7 delta vout/delta vin line transient response vin = -17v, vpulse = -3v, il = 5ma 2 90 mv 7 delta vout/delta il load transient response vin = -17v, il = 50ma, delta il = 200ma 3 0.5 v 7 dc parameters: drift values (the following conditions apply to all the following parameters, unless otherwise specified.) dc: "delta calculations performed on jan s and qmlv devices at group b, subgroup 5 only". vout output voltage vin = -15v, il = 5ma -0.12 0.12 v 1 vin = -15v, il = 500ma -0.12 0.12 v 1 vin = -27v, il = 5ma -0.12 0.12 v 1 vin = -27v, il = 500ma -0.12 0.12 v 1 vin = -35v, il = 5ma -0.12 0.12 v 1 vin = -35v, il = 50ma -0.12 0.12 v 1 iscd standby current drain vin = -35v, il = 5ma -20 20 % 1 note 1: tested at +125 c, correlated to +150 c for national die. note 2: s/s limit of 30mv/v is equivalent to 90mv. note 3: s/s limit of 2.5mv/ma is equivalent to .5v. note 4: vout = +150 c at subgroup 2. 3
microcircuit data sheet mjlm120-12-h rev 0bl graphics and diagrams graphics# description 09107hr (blank) h03arb (blank) see attached graphics following this page. 4
|
