View MD2203_932012.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet april 2002 91-sr-002-42-8l rev. 3.5 1 diskonchip ? 2000 dip md2200/2/3 features ? single-chip plug-n-play flash disk ? low power, single 3.3v or 5v power supply ? 16mbyte (mb) to 1gbyte (gb) capacity ? pinout and structure compatible with diskonchip millennium dip 8mb ? simple, easy-to-integrate interface ? 32-pin dip, jedec standard, eeprom-compatible pinout ? 8kb sized memory window ? boot os capability ? embedded trueffs ? software provides: ? full hard disk read/write emulation ? third-generation wear leveling ? automatic block management ? operates with diskonchip sdk in os-less environments, ansi-c source code kit ? error detection and correction (edc/ecc) for higher data reliability ? low power consumption ? static operation ? broad os support: dos, windows nt4.0/5.0, windows ce, be, psos+, qnx, vxworks, and others ? compatible with major processors: x86, mediagx, geode scxxxx, powerpc, 68k, mips, shx, strongarm, and others applications ? embedded systems ? internet access devices ? internet set-top boxes/itv, web browsers ? wbt, thin clients, network computers ? routers, networking ? web phones, car pcs, dvd, hpc ? point of sale, industrial pcs ? telecom, medical
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 2 table of contents 1 general description ............................................................................................................ ....... 4 2 detailed feature list.......................................................................................................... ........ 5 2.1 trueffs technology ............................................................................................................ 5 2.2 low power c onsumpt ion .......................................................................................................... ...........5 2.3 temperatur e r ange .............................................................................................................. ...............5 2.4 easy to in tegrate .............................................................................................................. ....................6 2.5 robust error correct ion ........................................................................................................ ...............6 2.6 high reli ability............................................................................................................... .......................6 2.7 high s peed ..................................................................................................................... ......................6 2.8 compatibility with 8mb disko nchip millennium seri es .......................................................................6 2.9 broad support for operating sy stems and pr ocesso rs .......................................................................6 2.10 portable solution ? shor ter time to market ..................................................................................... ....7 2.11 complete solution .............................................................................................................. ..................7 3 package description and pin list ............................................................................................ 8 4 designing with the diskonchip 2000 flash disk.................................................................... 9 4.1 hardware ....................................................................................................................... ....... 9 4.2 software....................................................................................................................... ......... 9 4.3 media contents................................................................................................................. .... 9 4.4 designing diskonchip 2000 into pc architecture................................................................ 9 5 theory of operation ............................................................................................................ ..... 11 6 specifications................................................................................................................. .......... 12 6.1 absolute maximum ratings ................................................................................................ 12 6.2 capacitance.................................................................................................................... .... 12 6.3 temperature ranges.......................................................................................................... 12 6.4 diskonchip assembly ........................................................................................................ 12 6.5 humidity....................................................................................................................... ....... 12 6.6 edc/ecc........................................................................................................................ .... 12 6.7 dc electrical characteristics over operating range.......................................................... 13 6.7.1 vcc = 5v char acterist ics ...................................................................................................... .....13 6.7.2 vcc = 3.3v c haracteri stics .................................................................................................... ....14 6.8 ac operating conditions .................................................................................................... 14 6.9 timing specifications.......................................................................................................... 15 6.9.1 read cycl e timi ng ............................................................................................................. .......15 6.9.2 write cycl e timi ng ............................................................................................................ ........16
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 3 7 mechanical dimensions .......................................................................................................... 17 8 shock and vibration ............................................................................................................ .... 18 9 ordering information ........................................................................................................... .... 18 10 additional information......................................................................................................... .... 19 how to contact us.............................................................................................................. ............. 20
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 4 1 general description the diskonchip 2000 product line is the second-gene ration of m-systems? diskonchip series of products. the diskonchip 2000 series provides a sma ll, single-chip, solid-state flash disk in a standard 32-pin dip package. combining a disk controller with flash memory on a single chip, diskonchip 2000 is the solution where minimal weight, space, and power consumption are essential. diskonchip 2000 is used in a wide range of products , such as information appliances, set-top boxes, thin clients, thin servers, network computers, and embedded, portable computers. by placing diskonchip 2000 in a standard socket , physical space requirements are reduced. unlike standard ide drives, no cables or extra space ar e required. diskonchip 2000 has no moving parts, resulting in significantly decreased power consumpti on and increased reliability. it is easy to use and reduces integration overhead. diskonchip 2000 is therefore a very attractive alternative to conventional hard and floppy disk drives. using trueffs technology, diskonchip 2000 delivers fu ll hard disk emulation. as such, the design and integration stages can be considerably redu ced, thereby enabling very fast time-to-market and ease of production. combined with its very attractiv e cost structure, diskonchip 2000 is a superior alternative to resident flash array (rfa). diskonchip 2000 products are available in capacitie s ranging from 16mb to 1gb. in addition, they are 100% pinout and software compatible with the diskonchip millennium dip 8mb package. in future versions, the capacity will increase (up to 4gb during 2003). since the same pinout will be retained, the socket on the target platform will not have to be changed to accommodate the larger capacities. diskonchip technology provides broad support for all major operating systems and processors in the market, enabling it to be readily integrated with any architecture. diskonchip 2000 is shipped as a plug-and-play de vice that is fully tested and formatted, and programmed with a dos driver. future driver, soft ware or content upgrades, or formatting, can be made on-board or off-board using diskonchip utilities and accessories provided by m-systems.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 5 2 detailed feature list 2.1 trueffs technology for a flash disk to emulate a hard disk, a so ftware management layer is required. trueffs is m-systems? patented flash file system management tec hnology that allows flash components to fully emulate hard disks, so they can be written to and read from like any other hard disk. trueffs software simplifies and enhances flash memories by: ? using third-generation wear leveling, which ensures that all blocks are erased an equal number of times. this increases the life of the flash media by orders of magnitude. ? using virtual blocking of the flash device to ma ke erasure of large blocks transparent to the operator. ? automatic block mapping. ? implementing a robust power-loss recovery mechanism to guarantee absolute protection of data. ? providing conventional address support fo r various architecture configurations. ? the trueffs driver supports 8-bit, 16-bit, and 32- bit bus architectures. support for the 16-bit and 32-bit bus architectures, typically used in risc processors, can be achieved by using the lsb of the data bus as follows: ? for 16-bit address boundary shif ts, shift the address lines by one , so that the host address line a1 connects to diskonchip 2000 address line a0, the host address line a2 connects to diskonchip 2000 line a1, and so on. ? for 32-bit address boundary shif ts, shift the address lines by two , so that the host address line a2 connects to diskonchip 2000 address line a0, the host address line a3 connects to diskonchip 2000 line a1, and so on. refer to application note ap-doc-030 for more details. 2.2 low power consumption the internal functions are synchronized with th e cpu?s read and write strobes. this innovation eliminates the need for an external clock and dramatically reduces power consumption. diskonchip 2000 requires only a single 3.3v or 5v power supply, which helps simplify integration. these features make diskonchip 2000 the best cos t/performance solution for computers that require minimal weight, space, and power consumption, providing a very attractive alternative to conventional hard and floppy disk drives. 2.3 temperature range diskonchip 2000 is available in both commercial (0 oc to +70 oc) and extended (-40 oc to +85 oc) temperature ranges.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 6 2.4 easy to integrate fast integration is ensured by the following diskonchip 2000 features: ? compatibility with standard eeprom dip pinout ? support for local bus and isa bus interface ? small memory map window size ? only 8kb ? static operation ? no clock required ? 16ma output drive (18ma at 3.3v) ? evaluation boards (evb) and trueffs software and utilities 2.5 robust error correction the diskonchip family utilizes a reed-solomon e rror detection code (edc) and error correction code (ecc), providing the following error immunity for each 512-byte block of data: ? corrects up to two 10-bit symbols, including two random bit errors ? corrects single bursts of up to 11 bits ? detects single bursts of up to 31 bits, and double bursts of up to 11 bits ? detects up to 4 random bit errors 2.6 high reliability diskonchip 2000 can be inserted into standard di p sockets, eliminating the need for mechanical disk drives, bulky ribbon cables and connectors. the design of diskonchip 2000 ensures high reliability even when subjected to levels of s hock, vibration, and temperature changes that would destroy a conventional magnetic disk drive. 2.7 high speed diskonchip 2000 implements an integrated archit ecture for data transfers, which eliminates bottlenecks typical in this area. additionally, it doubles read performance and significantly improves write performance, in comparison to competitive alternatives. diskonchip 2000 can sustain system write speeds of over 550kb per second, read speeds of more than 1.4mb per second (measured in isa no wait state environment) and read/write bur st transfer rates of nearly 5mb per second. 2.8 compatibility with 8mb diskonchip millennium series diskonchip 2000 is a 32-pin dual inline packag e (dip) that provides 100% pinout compatibility with m-systems' diskonchip millennium dip (8mb). diskonchip 2000 is fully software compatible with m-systems' diskonchip millennium dip (8mb). 2.9 broad support for operating systems and processors the diskonchip family of products, supplied w ith trueffs firmware, supports a wide range of operating systems (os), including dos , windows 2000, windows ce, windows nt,
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 7 windows embedded nt, be, qnx, vxworks, psos , linux, freebsd, pharlap ets, vrtx and more. in addition, leading operating systems such as wi ndows ce and tornado, offer native support for the diskonchip family of products for easy integration. for os-less applications and customized solutions , m-systems offers its diskonchip trueffs sdk, an ansi-c source code kit designed specifically to support these environments. the diskonchip family of products is compatib le with all major processors, supporting popular processors such as x86, 68k, mediagx, geode scxxxx, powerpc, mips, shx, strongarm, and many others. 2.10 portable solution ? shorter time to market the development and integration time for impl ementing a flash disk is greatly reduced by diskonchip?s standard software interface, which provides portability to other operating systems and processors and thereby shortens your time to market. 2.11 complete solution the diskonchip 2000 series offers a full flash di sk solution that includes different voltage and temperature options, software drivers tailored to your operating system, data sheets, application support and online email support. using diskonchip evaluation boards (evb), you can develop your software before the target hardware is ready. the diskonchip gang programmer reduces your pr oduction time, and facilitates fast response time to application software changes during production stages. in all, diskonchip offers a complete set of t ools for delivering a complete solution whenever your application can use a flash disk.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 8 3 package description and pin list # # # x figure 1: package description and pinout pin name description pin number direction a0 - a12 address bus 4 to 12, 23, 25 to 27 input d0 ? d7 data bus 13 to 15, 17 to 21 i/o ce# chip enable, active low 22 input oe# output enable, active low 24 input we# write enable, active low 31 input nc not connected. these pins may be left floating, tied to vcc, gnd or logic levels. absolute maximum ratings must be observed. 1, 2, 3, 28, 29, 30 vcc power 32 gnd ground 16
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 9 4 designing with the diskonchip 2000 flash disk 4.1 hardware diskonchip 2000 should be connected as a standa rd memory device, using standard memory interface signals. typically, diskonchip 2000 can be mapped to any free 8kb memory space. in pc architectures, if the memory window allocated to di skonchip 2000 is larger than 8kb, an automatic anti-aliasing mechanism prevents the firmware from being loaded more than once. figure 1 illustrates a typical interface between diskonchip 2000 and a system. oe# ce# d[7:0] we# diskonchip 2000 any capacity a[12:0] figure 2: simplified i/o diagram 4.2 software diskonchip 2000, under control of trueffs, is accesse d using standard file system calls like any other block device. applications can write to a nd read from any sector on diskonchip 2000, which is compatible with all diagnostic utilities, applications and file systems. the flash memory within diskonchip 2000 is accessed by trueffs through an 8kb window in the cpu?s memory space. trueffs handles the paging of this window in the flash array, as well as providing flash disk emulation that includes flas h table management, wear leveling, mapping out bad blocks, and background space reclamation of unused flash blocks. the same 8kb address space will be retained in future versions of diskonchip 2000 that offer greater capacities. 4.3 media contents diskonchip 2000 products are shipped from m-system s fully tested and ready to use. the products are formatted, and come with a dos driver. 4.4 designing diskonchip 2000 into pc architecture when used in pc-compatible architectures, diskonchip 2000 is allocated an 8kb memory window in the bios expansion memory range, which is usually located between 0c8000h and 0effffh. figure 3 illustrates the diskonchip 2000 memory window in relation to the pc memory map.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 10 8kb 1mb 640kb 0 display ram 0c8000h bios 0a0000h 0f0000h 0fffffh diskonchip extended memory figure 3: pc memory map after reset, the bios executes the post (power on self-test), and then searches for all expansion rom devices. when diskonchip 2000 is found, th e bios executes the initial program loader (ipl) code located in the boot-block area of di skonchip 2000. this code loads the trueffs driver into system memory, installs diskonchip 2000 as a di sk in the system, and then returns control back to the bios code. the operating system subsequently attempts to identify disks that are available and the diskonchip 2000 software (trueffs) responds by emulating a hard disk. from this point onward, diskonchip 2000 is identified by the system as a standard disk drive. it is assigned a drive letter and it can be used by any so ftware application. no bios setup modifications, autoexec.bat/config.sys modifications or external software are required. ? diskonchip 2000 can be used as the only disk in the system, in which case it will be accessed as drive [c:]. ? diskonchip 2000 can operate with or without a fl oppy drive, or with additional hard disks. when working with a hard disk, diskonchip 2000 can be configured as the last drive (the default configuration). in this case, the hard disk w ill be drive [c:] and diskonchip 2000 will be drive [d:]. ? diskonchip 2000 can also be configured as the first drive. in this case, the hard disk will be drive [d:] and diskonchip 2000 will be drive [c:]. ? diskonchip 2000 can be used as the boot devi ce when configured as drive [c:]. in this configuration, you must format diskonchip 2000 as a bootable device by copying the os files onto the disk. when running dos, use the sys command for this purpose.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 11 5 theory of operation flash flash control system interface vcc gnd ce# we# oe# d[0:7] boot block (ipl rom) a[0:12] edc/ecc figure 4: diskonchip 2000 simplified block diagram diskonchip 2000 appears to the system?s hardwa re as a standard eeprom, via the system interface block. the host cycles are passed to the flas h control block, to be written to or read from the flash device. to ensure the highest level of reliability, each cy cle is monitored by the edc/ecc (error detection and correction) block. in write cycles, the edc/ ecc block generates a syndrome for every sector that contains data, which is stored in the flash together with the sector. when the sector is read, the syndrome is regenerated for the data and compared with the original syndrome. when a mismatch is detected, it is repaired. the boot block is responsible for answering the bios expansion search in pc architectures. after the bios identifies diskonchip 2000 as a valid bios expansion device, it executes the code stored in the boot block. the bios then loads the trueffs software from the flash memory into the host memory, delivering full disk capabilities to the operating system. this code is identical for all diskonchip 2000 capacities, since trueffs automatically detects the memory capacity of diskonchip 2000. diskonchip 2000 uses the reed-solomon edc/ecc algorithm to ensure high data reliability. each time a block of data is written to the flash, a 6-byte checksum is also written. each time the data is read back from the flash, a new 6-byte code is computed. trueffs uses these checksums for error detection and, if necessary, error correction.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 12 6 specifications 6.1 absolute maximum ratings parameter symbol 3.3v model rating 1 5v model rating 1 units notes dc supply voltage v ccs -0.5 to 4.6 -0.3 to 6.0 v input pin voltage 2 v in -0.5 to v cc + 0.3 -0.3 to v cc + 0.3 v input pin current i in not specified -10 to 10 ma +25 c note 1 : permanent device damage may occur if absolute maximum ratings are exceed ed. exposure to absolute maximum rating conditions for extended periods may affect device reliability. note 2 : the voltage on any pin may undershoot to -2.0v or overshoot to vcc+2.0v for periods <20ns. 6.2 capacitance symbol parameter conditions 3.3v model rating 5v model rating unit md2200/2, v in = 0v 12 15 pf c i/o input/output capacitance MD2203, v in = 0v 36 45 pf note : capacitance is not 100% tested. 6.3 temperature ranges commercial operating temperature: 0 oc to +70 oc* extended operating temperature: -40 oc to +85 oc storage temperature: -50 oc to +85 oc 6.4 diskonchip assembly the diskonchip 2000 dip device is not hermetically sealed. therefore, it must be assembled after the pcb goes through its final rinse. assembling diskonchip 2000 prior to the rinse phase may cause it to absorb moisture. failure to adhere to the above assembly instruction can lead to device failures not covered by m-systems' warranty. note : diskonchip 2000 dip requires a dip socket on the target platform. due to its plastic shell and molding material, it cannot be soldered directly to the platform. 6.5 humidity 10% - 90% relative, non-condensing 6.6 edc/ecc enhanced reed-solomon:
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 13 ? corrects up to two 10-bit symbols, including two random bit errors. ? corrects single bursts of up to 11 bits. ? detects single bursts of up to 31 bits and double bursts of up to 11 bits. ? detects up to 4 random bit errors. 6.7 dc electrical characteristics over operating range 6.7.1 vcc = 5v characteristics symbol parameter conditions min typ max unit v ccs system supply voltage 1 4.5 5.0 5.5 v v ih high-level input voltage 2.0 v v il low-level input voltage 0.8 v v oh high-level output voltage i oh = -16ma 2.4 v v ol low-level output voltage i ol = 16ma 0.4 v md2200, md2202 10 a i il input leakage current MD2203 30 a md2200, md2202 10 a i oz output leakage current MD2203 30 a i vcc supply current 200ns cycle time, outputs open 40 60 ma md2200, md2202 60 400 a i stdby standby current MD2203 240 1200 a note 1 : the supply voltage of the extended temperature products listed below is: vcc = 5v 0.25v md2202-d192-x, md2202-d384-x, MD2203-d576-x, MD2203-d1024-x
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 14 6.7.2 vcc = 3.3v characteristics symbol parameter conditions min typ max unit v ccs system supply voltage 1 3.0 3.3 3.6 v v ih high-level input voltage 2.7 v v il low-level input voltage 0.6 v v hys input voltage hyster esis 1.1 1.5 v i oh = -18ma 2.4 v v oh high-level output voltage i oh = 0ma vcc-0.1 v i ol = 18ma 0.4 v v ol low-level output voltage i ol = 0ma 0.1 v md2200, md2202 10 a i il input leakage current MD2203 30 a md2200, md2202 10 a i oz output leakage current MD2203 30 a i vcc supply current 150ns cycle time, outputs open 30 60 ma md2200, md2202 70 400 a i stdby standby current MD2203 300 1350 a note 1 : the supply voltage of the extended temperature products listed below is: vcc = 3. 3v 0.15v md2202-d192-v3-x, md2202-d384-v3-x, MD2203-d576-v3-x, MD2203-d1024-v3-x 6.8 ac operating conditions timing specifications are based on the following conditions: parameter 3.3v model 5v model supply voltage 1,2 v cc = 3.3v 0.3v v cc = 5v 0.5v input pulse levels 0.2v to 2.9v 0.4v to 2.6v input rise and fall times 1ns 5ns input and output timing lev els 1.5v 0.8v and 2.0v output load 100 pf 50 pf note 1 : the supply voltage of the extended temperature products listed below is: vcc = 3. 3v 0.15v md2202-d192-v3-x, md2202-d384-v3-x, MD2203-d576-v3-x, MD2203-d1024-v3-x note 2 : the supply voltage of the extended temperature products listed below is: vcc = 5v 0.25v md2202-d192-x, md2202-d384-x, MD2203-d576-x, MD2203-d1024-x
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 15 6.9 timing specifications 6.9.1 read cycle timing ce# a[0..12] oe# d[0..7] we# t su (a) t en (d) t ho (ce1) t su (ce0) t ho (ce0) t su (ce1) t rec t acc t dis (d) figure 5: read cycle 3.3v 5v symbol description min (ns) max (ns) min (ns) max (ns) notes t su (a) address to oe# setup 2 10 t ho (a) oe# to address hold 35 56 t su (ce0) ce# to oe# setup 0 0 1 t ho (ce0) oe# ? to ce# = 0 hold 0 0 2 t ho (ce1) oe# or we# ? to ce# = 1 hold 8 42 t su (ce1) ce# ? to we# or oe# setup time 8 42 t rec oe# ? to start of next cycle 20 59 t acc read access time 110 130 t en (d) oe# to d active delay 15 75 7 91 t dis (d) oe# ? to d hi-z delay 13 44 note 1 : ce# may be asserted any time before or after oe# is asserted. if ce# is asserted after oe#, all timing relative to oe# asserted will be referenced instead to the time ce# was asserted. note 2 : ce# may be negated any time before or after oe# is nega ted. if ce# is negated before oe#, all timing relative to oe# negated will be referenced instead to the time ce# was negated.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 16 6.9.2 write cycle timing ce# t w (we) oe# we# a[0..12] t ho (a) t su (a) t ho (ce1) t ho (ce0) t su (d) t ho (d) t rec t ho (ce0) t su (ce1) d[0..7] figure 6: write cycle 3.3v 5v symbol description min (ns) max (ns) min (ns) max (ns) notes t su (a) address to we# setup time 0 10 t ho (a) we# to address hold time 35 56 t w (we) we# asserted width 62 98 t su (ce0) ce# to we# setup time 0 0 1 t ho (ce0) we# ? to ce# = 0 hold time 0 0 2 t ho (ce1) oe# or we# ? to ce# = 1 hold time 8 42 t su (ce1) ce# ? to we# or oe# setup time 8 42 t rec we# ? to start of next cycle 22 59 t su (d) d to we# ? setup time 50 48 t ho (d) we# ? to d hold time 0 40 note 1: ce# may be asserted any time before or after we# is asserted. if ce# is asserted after we#, all timing relative to we# asserted will be referenced instead to the time ce# was asserted. note 2 : ce# may be negated any time before or after we# is ne gated. if ce# is negated before we#, all timing relative to we# negated will be referenced instead to the time ce# was negated.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 17 7 mechanical dimensions figure 7: md220x mechanical dimensions low-profile md2200 md2202 millimeters (max.) millimeters (max.) a 41.9 43.95 b 18.05 18.3 c 2.54 2.54 d 15.24 15.24 e 5.7 6.0 f 4.0 4.0 g 0.51 0.51 h 38.2 38.2 high-profile MD2203 millimeters (max.) a 45.6 b 18.8 c 2.54 d 15.24 e 13.5 f 4.0 g 0.51 h 38.2 note : the above dimensions are maximum values.
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 18 8 shock and vibration reliability test test conditions reference standard vibration 100hz~2000hz, 15g peak, 3 cycles per axis (1hr.), 3 axes std-202f, method 204d mechanical shock half sine shock 50g, 11msec, +/-3 shock per axis, 3 axes std-202f, method 213b 9 ordering information md2200-dcc-v-t (low-profile) cc: capacity (mb) 24 v: supply voltage blank v3 5v 3.3v t: temperature range (optional) blank x commercial: 0 c to +70 c extended: -40 c to +85 c md2202-dccc-v-t (low-profile) cc: capacity (mb) 16, 32, 48, 64, 96, 192, 384 v: supply voltage blank v3 5v 3.3v t: temperature range (optional) blank x commercial: 0 c to +70 c extended: -40 c to +85 c MD2203-dccc-v-t (high-profile) ccc: capacity (mb) 80, 112, 144, 160, 192, 224, 256, 288, 576, 1024 v: supply voltage blank v3 5v 3.3v t: temperature range (optional) blank x commercial: 0 c to +70 c extended: -40 c to +85 c
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 19 10 additional information document/tool description diskonchip utilities diskonchip utilities user manual diskonchip quick installation guide diskonchip quick installation guide ap-doc-010 application note: designing with diskonchip dip ap-doc-016 application note: using diskonchip with qnx ap-doc-020 application note: diskonchip boot developers kit ap-doc-030 application note: designing diskonchip millennium in risc environment ap-doc-031 application note: designing with diskonchip millennium in a pc environment ap-doc-039 application note: onboard programming of the diskonchip millennium ap-doc-047 application note: designing diskonchip as a flash disk & boot device replacement im-doc-017 installation manual: using diskonchip with windows ce im-doc-021 installation manual: using diskonchip with linux o/s im-doc-022 installation manual: using diskonchip with vxworks diskonchip trueffs sdk product brief diskonchip trueffs sdk product brief diskonchip dip evb diskonchip dip evaluation board diskonchip gang programmer diskonchip 1+8 dip gang programmer
diskonchip 2000 dip 91-sr-002-42-8l rev. 3.5 20 how to contact us internet: http://www.m-sys.com e-mail: info@m-sys.com usa m-systems inc. 8371 central ave, suite a newark ca 94560 phone: +1-510-494-2090 fax: +1-510-494-5545 taiwan m-systems asia ltd. room b, 13 f, no. 133 sec. 3 min sheng east road taipei, taiwan r.o.c. tel: +886-2-8770-6226 fax: +886-2-8770-6295 japan m-systems japan inc. arakyu bldg., 5f 2-19-2 nishi-gotanda shinagawa-ku tokyo 141-0031 phone: +81-3-5437-5739 fax: +81-3-5437-5759 china m-systems china ltd. 25a international business commercial bldg. nanhu rd., lou hu district shenzhen, china 518001 phone: +86-755-519-4732 fax: +86-755-519-4729 europe and israel m-systems ltd. 7 atir yeda st. kfar saba 44425, israel tel: +972-9-764-5000 fax: +972-3-548-8666 ? 2002 m-systems flash disk pioneers, ltd. all rights reserved. this document is for information use only and is subject to cha nge without prior notice. m-systems flash disk pioneers ltd. ass umes no responsibility for any errors that may appear in this document. no part of th is document may be reproduced, transmitted, transc ribed, stored in a retrievable manner or translated into any language or computer la nguage, in any form or by any means, electronic, mechanical, m agnetic, optical, chemical, manual or otherwise, w ithout prior written consent of m-systems. m-systems products are not warranted to operate without failure. accordingly, in any use of the product in life support systems or other applications where failure could cause inju ry or loss of life, the product should only be incorporated in systems designed with appropriate and sufficient redundancy or backup features. contact your local m-systems sales office or distributor, or visit our website at www.m-sys.com to obtain the latest specifications before p lacing your order. diskonchip?, diskonchip dimm? and trueffs? are registered trademarks of m-systems. diskonkey ?, ffd? and supermap? are trademarks of m-systems. other product names mentioned in this doc ument may be trademarks or registered trademarks of their res pective owners and are hereby acknowledged.

▲Up To Search▲

Price & Availability of MD2203

	To Download MD2203 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .