View 12-23C-S2GHBHC-A01-2C04_1235722.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 1 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai technical data sheet full color chip led ( chip led with right angle lens) 12-23c/s2ghbhc-a01/2c features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? multi-color type. ? pb-free. descriptions ? the 12-23c smd taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? automotive: backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide chip type material emitted color lens color s2 algainp brilliant orange gh ingan brilliant green bh ingan blue water clear
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 2 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c package outline dimensions 1.0 r1.0 0.40 0.40 green blue 0.50 1.50 2.0 3.0 1 2 3 4 1 2 3 4 anode mark orange 2 3 4 1 note: the tolerances unless mentioned is 0.1mm ,unit = mm
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 3 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f s2:25 gh:25 bh:25 ma operating temperature topr -40 ~ +85 storage temperature tstg -40 ~ +90 soldering temperature tsol 260 (for 5 seconds) power dissipation pd s2:60 gh:110 bh:110 mw peak forward current (duty 1/10 @1khz) i fp s2:60 gh:100 bh:100 ma
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 4 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity s2 iv gh bh 72 140 36 140 210 65 ----- mcd i f =20ma viewing angle 2 1/2 ----- 100 ----- deg i f =20ma peak wavelength s2 p gh bh ----- 611 518 468 ----- nm i f =20ma dominant wavelength s2 d gh bh ----- 605 525 470 ----- nm i f =20ma spectrum radiation bandwidth s2 gh bh ----- 17 25 25 ----- nm i f =20ma forward voltage s2 v f gh bh ----- 2.0 3.3 3.3 2.4 3.9 3.9 v i f =20ma reverse current s2 i r gh bh ----- ----- 10 50 50 a v r =5v notes: 1.tolerance of luminous intensity 10% 2.tolerance of dominant wavelength 1nm 3.tolerance of forward voltage 0.1v
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 5 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c typical electro-optical characteristics curves s2
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 6 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c typical electro-optical characteristics curves gh
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 7 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c typical electro-optical characteristics curves bh
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 8 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 9 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c carrier tape dimensions: loaded quantity 2000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging aluminum moistue-proof bag label desiccant label
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 10 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 / 85%rh 1000 hrs. 22 pcs. 0/1
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 11 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30 or less and 90%rh or less. 2.3 the leds should be used within a year. 2.4 after opening the package, the leds should be kept at 30 or less and 70%rh or less. 2.5 the leds should be used within 168 hours (7 days) after opening the package. 2.6 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4. soldering iron each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the da mage of the product is often started at the time of the hand solder.
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.0 page: 12 of 12 device no. : dse-123-008 prepared date: 06-15-2004 prepared by : jeff tsai 12-23c/s2ghbhc-a01/2c 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. e verlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of 12-23C-S2GHBHC-A01-2C04

	To Download 12-23C-S2GHBHC-A01-2C04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .