power shelf main output n+1 redundant height afe2000 power signal power power supplies interface AFS4000-3u2p 4000w 2000w 3u (5.25 inch) 2 parallel via 25 pin d type connector afs6000-4u3p 6000w 4000w 4u (7.0 inch) 3 parallel via 37 pin d type connector AFS4000 and afs6000 rack mountable power shelves [ 2 year warranty ] ? front-end shelves for afe2000 series power supplies ? distributed power architecture ? ul and tuv approval ? hot-swap power system ? n+1 redundancy the AFS4000 and afs6000 power shelves are designed to house artesyn standard afe2000 series front-end power supplies. the shelves mount into standard 19 inch racks. the power shelves accept high range (200 to 240vac) ac power and deliver a r egulated dc bus voltage generated from the afe2000 power supplies. the power shelf provides input filtering and protection and individual 20 amp circuit breakers for each afe2000 power supply are provided on the front end of the shelf. an output bus bar on the rear of the unit is provided for distribution of the main output to system payload. control, diagnostic and protection signals and the auxiliary output from afe2000 power supplies are routed through the power shelf to a parallel interface connector on the rear of the unit. clearance is provided on the rear of the unit to maintain adequate airflow and cooling of the afe2000 power supplies mounted within the shelf. p age 1 nominal input voltage line current (typical) 200vac 11.6a rms 200vac 11.2a rms 220vac 10.6a rms 240vac 9.7a rms ac input line cord current (for each afe2000 module within power shelf) afe2000 output configurations with afs power shelves power module power shelf afe2000-26s48na afe2000-26s54na afe2000-26s56na AFS4000-3u2p 48v @ 83a 54.5v @ 73a 56.2v @ 71a 12v @ 2a 12v @ 2a 12v @ 2a afs6000-4u3p 48v @ 124a 54.5v @ 109a 56.2v @ 106a 12v @ 3a 12v @ 3a 12v @ 3a afs power shelf characteristics notice some models listed in this document have been discontinued please contact your local artesyn representative or use the on line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
international safety standard approvals en60950/iec950 file no. e9972397 ul1950 file no. e135734 AFS4000 and afs6000 rack-mountable power shelves for afe2000 series modules distributed power front end ac/dc power supplies | 2000w ac/dc p age 2 http://www.artesyn.com a air flow normal allow 6" clearence front / back to insure adequate cooling customer signal access (connector) mate - use 25 pin d-type connector 0.406 (10.312) typ 5.22 (132.59) 18.31 (465.07) 19.00 (482.60) 2.250 (57.150) 0.265 (6.731) typ venting for power system option slot pwb - farside mounting brackets optional location clearance to accommodate cabinet rail mtg/support 0.093 (2.362) ref 13.5 (342.90) 0.12 (3.05) 17.32 (439.93) a 1.50 (31.0) ref chassis gnd (#8-32 studs) vent area (keep free of obstructions) view a-a rear view customer 200-240 vac inputs hubbell h320bl mate - use 20 amp power cord with hubbell h320c connector ac section breakers/line filters power system option slot afe2000 series hot pluggabble power supplies customer dc output power bus access (two 10-32 studs each output 1.49 (37.85) v out ac good fail pwr good v out ac good fail pwr good mechanical notes for AFS4000-2u2p interface drawing 1 all dimensions in inches (mm). please consult our website for the following items: ? application note
p age 3 chassis gnd (#9-32 studs) customer 200-240 vac inputs hubbell h320bl mate - use 20 amp power cord with hubbell h320c connector afe2000 series hot pluggable power supplies view a-a rear view ac section breakers/line filters clearance to accommodate cabinet rail mtg/support dimensions in inches (mm) mounting brackets optional location a a 0.093 (2.36) ref 0.406 (10.312) 0.265 (6.731) 13.70 (347.98) 17.32 (439.93) allow 6" clearance front/back to insure adequate cooling normal air flow 0.12 (3.05) 1.50 (38.10) ref 1.750 (44.45) 1.750 (44.45) 1.750 (44.45) 6.97 (177.04) 0.86 (21.84) 18.08 (459.23) 18.98 (482.09) v out v out ac good f ail pwr good ac good f ail pwr good ac good f ail pwr good v out customer dc output power bus access (three 10-32 studs each output) customer signal access (connector) mate - use 37 pin d-type connector vent area (keep free of obstructions) mechanical notes for afs6000-4u3p interface drawing 1 all dimensions in inches (mm). AFS4000 and afs6000 rack-mountable power shelves for afe2000 series modules 2000w ac/dc | distributed power front end ac/dc power supplies data sheet ? artesyn technologies ? 2001 the information and specifications contained in this data sheet are believed to be correct at time of publication. however, ar tesyn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. specifications are subject to change without notice. no rights under any patent accompa ny the sale of any such product(s) or information contained herein. ds_AFS4000_6000_obs_obs_20010404.pdf
|
