 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Digital Attenuator, 15 dB, 4-Bit DC - 2 GHz Features q q q q q q q AT-210 V 2.00 SO-16 Attenuation 1-dB Steps to 15 dB High Accuracy +/-3% Temperature Stability +/-0.15 dB from -40C to +85C Low Intermodulation Product: +50 dBm IP3 Low DC Power Consumption: 50 W Low Cost SOIC16 Plastic Package Tape and Reel Packaging Available1 Description M/A-COM's AT-210 is a 4-bit, 1-dB step GaAs MMIC digital attenuator in a low cost SOIC 16-lead surface mount plastic package. The AT-210 is ideally suited for use where high accuracy, fast switching, very low power consumption and low intermodulation products are required. Typical applications include radio, cellular, and wireless LANs, GPS equipment and other Gain/Level Control circuits. The AT-210 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. Ordering Information Part Number AT-210 PIN AT-210TR AT-210RTR Package SOIC 16-Lead Plastic Package Forward Tape & Reel Reverse Tape & Reel Electrical Specifications, TA = +25C Parameter Reference Insertion Loss Test Conditions2 DC - 0.1 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 1.0 GHz DC - 2.0 GHz Unit Min. Typ. Max dB 0.9 1.2 dB 1.3 1.5 dB 1.5 1.8 dB 1.8 2.0 (0.15 dB + 3% of Attenuation Setting in dB) dB (0.30 dB + 3% of Attenuation Setting in dB) dB 1.8:1 10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF In Band Input Power 0.05 GHz Input Power 0.5 - 2.0 GHz Measured Relative 0.05 GHz to Input Power 0.5 - 2.0 GHz (For two-tone Input Power Up to +5 dBm) Measured Relative 0.05 GHz to Input Power 0.5 - 2.0 GHz (For two-tone Input Power Up to +5 dBm) nS nS mV dBm dBm dBm dBm dBm dBm 10 15 18 22 28 49 72 45 50 Attenuation Accuracy 3 VSWR Trise, Tfall Ton, Toff Transients 1 dB Compression IP2 IP3 1. Refer to "Tape and Reel Packaging"Section, or contact factory. 2. All measurements at 1 GHz in a 50 system, unless otherwise specified. 3.Attenuation accuracy specifications apply with negative bias control and low inductance grounding. Digital Attenuator, 15 dB, 4-Bit Absolute Maximum Ratings Parameter Max. Input Power 50 MHz 500-2000 MHz Control Voltage Operating Temperature Storage Temperature Absolute Maximum1 +27 dBm +34 dBm +5 V, -8.5 V -40C to +85C -65C to +150C AT-210 V 2.00 Functional Schematic RF1 GND GND GND GND GND GND RF2 16 15 14 13 12 11 10 9 8 dB 4 dB 2 dB 1 dB 1.Operation of this device above any one of these parameters may cause permanent damage. 1 1 2 2 3 3 4 5 6 7 0 8 VC1 VC1 VC2 VC2 VC3 VC3 VC4 VC4 Pin Configuration Pin 1 2 3 4 5 6 7 8 Description VC1 VC1 VC2 VC2 VC3 VC3 VC4 VC4 Pin No. 9 10 11 12 13 14 15 16 Description RF2 GND GND GND GND GND GND RF1 Truth Table Control Inputs VC4 VC4 VC3 VC3 VC2 VC2 VC1 VC1 Attenuation (dB) 1 0 1 1 1 0 0 1 0 0 0 1 1 1 0 1 1 0 0 0 1 0 0 1 1 1 1 0 1 0 0 0 0 1 0 1 1 1 1 1 0 0 0 0 0 0 1 1 Reference 1 dB 2 dB 4 dB 8 dB 15 dB "0" = Vin Low, Vin Low = 0V, "1" = Vin High, Vin High = -5V "0" = 0 to -0.2V @ 20 A Max "1" = -5V @ 10 A typ to -8V @ 200 A Max Typical Performance |
Price & Availability of AT-210TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |