|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ON Semiconductort General Purpose Transistors NPN Silicon 2N4401 ON Semiconductor Preferred Device MAXIMUM RATINGS Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current -- Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC PD PD TJ, Tstg Value 40 60 6.0 600 625 5.0 1.5 12 -55 to +150 Unit Vdc Vdc Vdc mAdc mW mW/C Watts mW/C C 1 2 3 CASE 29-11, STYLE 1 TO-92 (TO-226AA) COLLECTOR 3 2 BASE 1 EMITTER THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Symbol RqJA RqJC Max 200 83.3 Unit C/W C/W ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage(1) (IC = 1.0 mAdc, IB = 0) Collector-Base Breakdown Voltage (IC = 0.1 mAdc, IE = 0) Emitter-Base Breakdown Voltage (IE = 0.1 mAdc, IC = 0) Base Cutoff Current (VCE = 35 Vdc, VEB = 0.4 Vdc) Collector Cutoff Current (VCE = 35 Vdc, VEB = 0.4 Vdc) 1. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. V(BR)CEO V(BR)CBO V(BR)EBO IBEV ICEX 40 60 6.0 -- -- -- -- -- 0.1 0.1 Vdc Vdc Vdc Adc Adc Preferred devices are ON Semiconductor recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2001 1 June, 2001 - Rev. 0 Publication Order Number: 2N4401/D 2N4401 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued) Characteristic Symbol Min Max Unit ON CHARACTERISTICS(1) DC Current Gain (IC = 0.1 mAdc, VCE = 1.0 Vdc) (IC = 1.0 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 150 mAdc, VCE = 1.0 Vdc) (IC = 500 mAdc, VCE = 2.0 Vdc) Collector-Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) Collector-Emitter Saturation Voltage (IC = 500 mAdc, IB = 50 mAdc) Base-Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) Base-Emitter Saturation Voltage (IC = 500 mAdc, IB = 50 mAdc) hFE 20 40 80 100 40 VCE(sat) VBE(sat) -- -- 0.75 -- -- -- -- 300 -- 0.4 0.75 0.95 1.2 Vdc Vdc -- SMALL-SIGNAL CHARACTERISTICS Current-Gain -- Bandwidth Product (IC = 20 mAdc, VCE = 10 Vdc, f = 100 MHz) Collector-Base Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Emitter-Base Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Input Impedance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) Voltage Feedback Ratio (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) Small-Signal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) Output Admittance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) fT 250 Ccb Ceb hie 1.0 hre hfe 40 hoe 1.0 500 30 mhos 0.1 15 8.0 X 10-4 -- -- -- -- 6.5 30 pF pF k ohms MHz SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time (VCC = 30 Vdc, VBE = 2.0 Vdc, IC = 150 mAdc, IB1 = 15 mAdc) (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) td tr ts tf -- -- -- -- 15 20 225 30 ns ns ns ns 1. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. SWITCHING TIME EQUIVALENT TEST CIRCUITS +30 V +16 V 0 -2.0 V 1.0 to 100 s, DUTY CYCLE 2.0% 1.0 k 200 +16 V 0 < 2.0 ns CS* < 10 pF 1.0 to 100 s, DUTY CYCLE 2.0% 1.0 k +30 V 200 -14 V < 20 ns CS* < 10 pF -4.0 V Scope rise time < 4.0 ns *Total shunt capacitance of test jig connectors, and oscilloscope Figure 1. Turn-On Time Figure 2. Turn-Off Time http://onsemi.com 2 2N4401 TRANSIENT CHARACTERISTICS 25C 30 20 CAPACITANCE (pF) Q, CHARGE (nC) Cobo 10 7.0 5.0 3.0 2.0 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 REVERSE VOLTAGE (VOLTS) Ccb 100C 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 50 0.1 10 20 30 50 70 100 200 IC, COLLECTOR CURRENT (mA) QA 300 500 VCC = 30 V IC/IB = 10 QT 20 30 Figure 3. Capacitances Figure 4. Charge Data 100 70 50 t, TIME (ns) t, TIME (ns) 30 20 tr @ VCC = 30 V tr @ VCC = 10 V td @ VEB = 2.0 V td @ VEB = 0 IC/IB = 10 100 70 50 30 20 tf tr VCC = 30 V IC/IB = 10 10 7.0 5.0 10 20 30 50 70 100 200 300 500 10 7.0 5.0 10 20 30 50 70 100 200 300 500 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 5. Turn-On Time Figure 6. Rise and Fall Times 300 200 t s, STORAGE TIME (ns) ts = ts - 1/8 tf IB1 = IB2 IC/IB = 10 to 20 t f , FALL TIME (ns) 100 70 50 30 20 IC/IB = 10 IC/IB = 20 VCC = 30 V IB1 = IB2 100 70 50 10 7.0 5.0 30 10 20 30 50 70 100 200 300 500 10 20 30 50 70 100 200 300 500 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 7. Storage Time Figure 8. Fall Time http://onsemi.com 3 2N4401 SMALL-SIGNAL CHARACTERISTICS NOISE FIGURE VCE = 10 Vdc, TA = 25C; Bandwidth = 1.0 Hz 10 8.0 NF, NOISE FIGURE (dB) 6.0 4.0 2.0 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 f, FREQUENCY (kHz) IC = 1.0 mA, RS = 150 IC = 500 A, RS = 200 IC = 100 A, RS = 2.0 k IC = 50 A, RS = 4.0 k RS = OPTIMUM RS = SOURCE RS = RESISTANCE 10 f = 1.0 kHz 8.0 NF, NOISE FIGURE (dB) 6.0 4.0 2.0 0 IC = 50 A IC = 100 A IC = 500 A IC = 1.0 mA 10 20 50 100 50 100 200 500 1.0 k 2.0 k 5.0 k 10 k 20 k RS, SOURCE RESISTANCE (OHMS) 50 k 100 k Figure 9. Frequency Effects Figure 10. Source Resistance Effects h PARAMETERS VCE = 10 Vdc, f = 1.0 kHz, TA = 25C This group of graphs illustrates the relationship between hfe and other "h" parameters for this series of transistors. To obtain these curves, a high-gain and a low-gain unit were 300 hie , INPUT IMPEDANCE (OHMS) 200 hfe , CURRENT GAIN selected from the 2N4401 lines, and the same units were used to develop the correspondingly numbered curves on each graph. 50 k 20 k 10 k 5.0 k 2.0 k 1.0 k 500 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 2N4401 UNIT 1 2N4401 UNIT 2 100 70 50 30 20 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 2N4401 UNIT 1 2N4401 UNIT 2 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 11. Current Gain h re , VOLTAGE FEEDBACK RATIO (X 10-4 ) 10 hoe, OUTPUT ADMITTANCE (m mhos) 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 100 50 20 10 5.0 2.0 1.0 0.1 Figure 12. Input Impedance 2N4401 UNIT 1 2N4401 UNIT 2 2N4401 UNIT 1 2N4401 UNIT 2 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 13. Voltage Feedback Ratio http://onsemi.com 4 Figure 14. Output Admittance 2N4401 STATIC CHARACTERISTICS 3.0 h FE, NORMALIZED CURRENT GAIN 2.0 VCE = 1.0 V VCE = 10 V TJ = 125C 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mA) 30 50 70 100 200 300 500 25C -55C Figure 15. DC Current Gain VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 1.0 0.8 0.6 0.4 0.2 0 0.01 TJ = 25C IC = 1.0 mA 10 mA 100 mA 500 mA 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 IB, BASE CURRENT (mA) 2.0 3.0 5.0 7.0 10 20 30 50 Figure 16. Collector Saturation Region 1.0 0.8 VOLTAGE (VOLTS) 0.6 0.4 0.2 0 TJ = 25C +0.5 VBE(sat) @ IC/IB = 10 COEFFICIENT (mV/ C) 0 -0.5 -1.0 -1.5 -2.0 -2.5 qVB for VBE 0.1 0.2 0.5 50 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 100 200 500 qVC for VCE(sat) VBE @ VCE = 10 V VCE(sat) @ IC/IB = 10 0.1 0.2 0.5 50 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 100 200 500 Figure 17. "On" Voltages Figure 18. Temperature Coefficients http://onsemi.com 5 2N4401 PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AL A R P L SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- B K XX G H V 1 D J C SECTION X-X N N STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR DIM A B C D G H J K L N P R V http://onsemi.com 6 2N4401 Notes http://onsemi.com 7 2N4401 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 2N4401/D |
Price & Availability of 2N4401-D |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |