View CMM0016-BD_847446.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CMM0016-BD
RNP@*@RPNP@gh gaTM@mmic@Qw@p*@a"-'OE
mOE"OEY@b*..."L@i"N@QPWYU@r*`'@rNL@h*TM*"L@tYTM@WWPYY t'Z@RXQNYXXNTVPP@@fYZ@RXQNYXXNTVQU@@N"OE"OEY...*..."N*" RPPU@mOE"OEY@b*..."L@i"N
CMM0016-BD 2.0 to 20.0 GHz GaAs MMIC 1W Power Amplifier
Advanced Product Information August 2004 Features Small Size: 2.32 x 1.30 x 0.076 mm Integrated On-Chip DC Blocking Single Bias Operation Directly Cascadable - Fully Matched Unconditionally Stable P1dB: 29 dBm, Typ. @ 18 GHz Linear Gain: 9.5 dB, Typ. @ 18 GHz pHEMT Technology Silicon Nitride Passivation
(1 of 4)
Chip Diagram
Units: mm
Specifications (TA = 25C, Vdd = 12V) 1
Parameters Units Min Typ Max
Frequency Range Linear Gain Gain Flatness Power Output: 2-18 GHz (@1 dB Gain Compression) Power Output: 2-20 GHz (@1 dB Gain Compression) P1dB Variation (over operating frequency) Saturated Output Power: 2-18 GHz Saturated Output Power: 2-20 GHz Input Return Loss Output Return Loss Current Thermal Resistance
GHz dB dB dBm dBm dBm dBm dBm dB dB mA C/W
2.0 8.5 28.5 26.5
20.0 12.5 1.5
5.0 29.5 27.5 -10.0 -10.0 730 15.7
650
690
Stability 2
Unconditionally Stable
Notes: 1. Tested on Celeritek Connectorized evaluation board (standard assembly condition detailed on page 4). 2. Stability factor measured on-wafer.
Absolute Maximum Ratings 1
Parameter Rating
Die Attach and Bonding Procedures
Die Attach: Eutectic die attach is recommended. For eutectic die attach: Preform: AuSn (80% Au, 20% Sn); Stage Temperature: 290C, 5C; Handling Tool: Tweezers; Time: 1 min or less. Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (prestressed); Thermocompression bonding is preferred over thermosonic bonding. For thermocompression bonding: Stage Temperature: 250C; Bond Tip Temperature: 150C; Bonding Tip Pressure: 18 to 40 gms depending on size of wire.
Drain Voltage 9.0V (min.) / 13.0V (max.) Drain Current 750 mA Continuous Power Dissipation 9.5 W Input Power 20 dBm Storage Temperature -50C to +150C Channel Temperature 175C Operating Backside Temperature -40C to (See note 2)
Notes: 1. Operation outside these limits can cause permanent damage. 2. Calculation maximum operating temperature: Tmax = 175-(Pdis [W] x 15.7) [C].
3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CMM0016-BD
Frequency (MHz) (Mag) S11 (Ang) (Mag) S21
Advanced Product Information - August 2004
(2 of 4)
Typical On-Wafer Scattering Parameters (Vd = +12V, Idd = 700 mA, T = 25C, device in a 50 ohm system)
(Ang) (Mag) S12 (Ang) (Mag) S22 (Ang)
0.1 1.1 2.1 3.1 4.1 5.1 6.1 7.1 8.1 9.1 10.1 11.1 12.1 13.1 14.1 15.1 16.1 17.1 18.1 19.1 20.1 21.1 22.1 23.1 24.1 25.1 26.1 27.1 28.1 29.1 30.1 31.1 32.1 33.1 34.1 35.1 36.1 37.1 38.1 39.1 40.1
0.895 0.224 0.120 0.132 0.116 0.090 0.058 0.045 0.056 0.082 0.105 0.112 0.100 0.065 0.026 0.072 0.137 0.185 0.202 0.182 0.134 0.105 0.174 0.247 0.272 0.231 0.137 0.196 0.234 0.349 0.386 0.428 0.480 0.539 0.597 0.658 0.706 0.751 0.790 0.826 0.856
-27.46 -94.72 -115.66 -120.35 -142.53 -159.80 -155.91 -135.98 -111.34 -107.92 -116.81 -130.45 -145.03 -154.88 -114.03 -60.29 -72.11 -90.65 -109.59 -125.30 -132.98 -107.03 -94.92 -110.42 -132.47 -160.25 -141.31 -146.43 -150.80 170.45 130.23 92.93 60.25 34.23 12.71 -4.54 -19.16 -31.72 -42.32 -52.12 -60.30
0.374 2.819 2.845 2.912 2.906 2.870 2.848 2.839 2.863 2.929 3.014 3.087 3.119 3.119 3.123 3.163 3.237 3.312 3.326 3.296 3.213 3.088 3.039 3.136 3.242 2.672 2.001 2.259 2.569 0.720 0.247 0.104 0.042 0.023 0.014 0.013 0.007 0.004 0.001 0.003 0.001
-118.79 -167.62 137.27 98.39 64.29 31.44 -0.20 -31.59 -62.57 -94.08 -126.53 -160.15 165.56 131.34 97.11 62.54 26.78 -10.92 -50.17 -90.24 -131.48 -172.66 145.86 101.21 47.32 -12.38 -56.79 -104.68 153.51 68.96 26.46 -5.39 -28.72 -53.32 -63.64 -90.12 -169.84 138.88 141.98 125.45 -30.91
0.001 0.001 0.001 0.001 0.001 0.000 0.000 0.001 0.001 0.001 0.002 0.003 0.003 0.004 0.005 0.006 0.007 0.009 0.011 0.011 0.012 0.014 0.015 0.018 0.023 0.024 0.022 0.028 0.030 0.006 0.002 0.003 0.003 0.001 0.005 0.010 0.008 0.002 0.002 0.003 0.002
179.07 10.30 161.31 -24.81 99.46 -18.80 -15.21 -9.90 -17.50 -40.23 -66.05 -95.26 -127.63 -150.95 -177.36 157.71 130.91 105.19 69.44 34.20 4.93 -33.95 -73.77 -111.05 -158.10 149.27 119.19 69.82 -17.00 -100.97 -28.35 21.66 -5.04 11.16 -1.35 -44.00 -171.43 177.92 68.47 -55.70 -147.28
0.982 0.371 0.184 0.109 0.134 0.201 0.254 0.273 0.256 0.214 0.186 0.221 0.285 0.321 0.305 0.223 0.078 0.105 0.264 0.348 0.319 0.172 0.128 0.322 0.393 0.210 0.301 0.492 0.547 0.501 0.584 0.646 0.707 0.755 0.789 0.789 0.763 0.840 0.867 0.888 0.896
-30.49 172.50 155.95 176.74 -148.11 -144.37 -152.76 -163.80 -173.33 -176.04 -165.38 -153.79 -157.63 -171.26 170.18 149.10 131.73 -99.62 -123.96 -155.20 168.29 115.92 -27.54 -99.37 -159.52 107.34 -40.67 -112.02 109.01 -21.16 -59.24 -78.61 -91.05 -101.84 -111.75 -123.00 -120.14 -127.28 -134.25 -140.59 -146.39
S-Parameter Data Files are available on-line at: www.celeritek.com
3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095
CMM0016-BD
Advanced Product Information - August 2004 V1.0
(3 of 4)
13 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 -6 -7 0 2 4
CMM0016 Typical On-wafer S-parameter Data 12V, 660mA
15 10 5 0 -5 -10 -15 -20 -25 -30 -35 S11, S22 (dB) S21 K-factor S11 S22
Linear Gain (dB), K-factor
6
8
10 12 14 16 18 20 22 Frequency (GHz)
24 26 28 30 32
3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CMM0016-BD
Assembly Example
Advanced Product Information - August 2004
(4 of 4)
Note: 1. Eutectic attach on at least 30mil thick CuW or CuMo carrier is recommend. 2. For evaluation, a 1.4mil wire diameter lithium gold air coil has been used .
Ordering Information
The CMM0016-BD is available in bare die and is shipped in Gel Pak. Part Number for Ordering Package CMM0016-BD Bare Die
Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.
3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095

▲Up To Search▲

Price & Availability of CMM0016-BD

	To Download CMM0016-BD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .