 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Miniature Ferrite Isolators TM (R) 18 - 110 GHz ISOLATORS Features Models from 18-110 GHz Low Insertion Loss Good Temperature Performance Small Size Low Cost Description Microsemi's Miniature Ferrite Isolators are H-Plane, YJunction devices with similar performance specifications to standard size isolators. Models are available in bands covering center frequencies from 18-110 GHz and feature low insertion loss and high isolation within the specified bandwidth. MMI series isolators are useful in improving the stability of microwave oscillators and amplifiers by projecting matched impedance across the frequency and preventing reverse and reflected power from adversely affecting performance. Specifications @ 25C Model No. MMI42595T MMI28599T MMI22599T MMI19599T MMI10599T Freq. GHz 18.0-26.5 26.5-40.0 33.0-50.0 40.0-60.0 75.0-110.0 Waveguide WR-42 WR-28 WR-22 WR-19 WR-10 Flange UG595/U UG599/U UG599/U-M UG599/U-M UG599/U-M Min. Bandwidth (%) 10 10 8 7 2 Min. Isolation (dB) 20 20 20 18 18 Max. Insertion Loss 0.3 0.4 0.5 0.6 0.7 Max. SWR (In & Out) 1.30 1.30 1.30 1.35 1.30 Max. Average Power (Watts) Forward Reverse 40 30 20 5 0.2 1.0 1.0 0.8 0.5 0.2 Operating temperature range: -10 to +60C except: -10C to +50C for MI10599. Copyright 2008 Rev: 2008-11-04 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978 -442-5600, Fax: 978-937-3748 Page 1 Miniature Ferrite Isolators TM (R) 18 - 110 GHz ISOLATORS C D A Ordering Information. Model Number MMI 28 599 T E B Model W/G size Flange Threaded Flange Holes M3 Thread Thru From One Side Only 4 Places WAVEGUIDE SIZE WR-42 WR-28 WR-22 WR-19 WR-10 A IN/MM 0.50/12.7 0.50/12.7 0.50/12.7 B IN/MM 125/31.8 125/31.8 125/31.8 C IN/MM 0.75/19.1 0.75/19.1 0.75/19.1 D IN/MM 0.38/9.7 0.38/9.7 0.38/9.7 E IN/MM 0.45/11.4 0.38/9.7 0.38/9.7 0.38/9.7 0.50/12.7 MMI isolator part numbers are designated by indicating the center frequency and waveguide size and flange type. For example, the MMI22599T at 33.5 GHz indicates WR22 waveguide, UG599/U-M flange with threaded holes at 33.5 GHz center frequency. For a through-hole flange the part number is MMI22599. 0.75/19.1 1.50/38.1 090/22.9 0.45/11.4 1.00/25.4 1.20/30.5 0.90/22.9 0.45/11.4 Copyright 2008 Rev: 2008-11-04 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978 -442-5600, Fax: 978-937-3748 Page 2 |
Price & Availability of MMI10599T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |