 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| .100 .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option S Military (with 3M's 3518 polarizing key) and centerbump polarization S Optional ejector latches S Mounting holes for securing header to board S Solder tail and wrap tail options S Optional polarizing posts S High temperature option Date Modified: October 19, 1999 19 TS-0772-02 Sheet 1 of 4 Physical Insulation Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT -- High Temp Option) Flammability: UL 94V-0 Color: Gray, Standard Beige (High Temp Option) Marking: 3M Logo, Part Identification Number and Orientation Triangle Contact Material: Copper Alloy Plating Underplate: 100 [ 2.54 m ] Nickel -- QQ-N-290, Class 2 Wiping Area: Gold -- MIL-G-45204, Type II, Grade C Solder Tails: 200 [ 5.08 m ] 60/40 Tin Lead -- MIL-P-81728 Wrap Tails: Gold Flash, Standard Electrical Current Rating: 1 A Insulation Resistance: >1 x 109 at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: -55C to +105C High Temp Process Rating: Maximum 235C, with 90 seconds over 215C UL File No.: E68080 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100 .100 Latch/Ejector Header -X0XX Header with No Ejector/Latch -X5XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief 4 Wall, Straight & Right Angle, High Temp Option -X6XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief -X4XX Header with Ejector only (R) (R) .08 [2.0] .08 [2.0] .424 .010 [ 10.77 ] .97 Ref [24.6] .573 .010 [ 14.55 ] 1.07 Ref [27.2] 1.07 Ref [27.2] .37 Ref [9.4] .46 Ref [11.7] .42 Ref [10.7] Note: This Ejector is a Nickel Plated Zinc Alloy Casting. .025 .002 Sq Typ [ 0.64 ] .24 [6.1] 2X .100 [2.54] (See Note 2) .020 [0.51] D .28 [7.1] .30 [7.6] .100 Ref [2.54] C L "Y" F Typ Position 1 Orientation Triangle Notch A (See Table 1 & Note1) Notch B (See Table 1) .16 [4.1] A Notch C (See Table 1 & Note 1) B E .010 .12 [3.0] .25 [6.4] .100 Ref [2.54] Position 1 B .34 [8.3] Section A-A (Straight) .025 .002 Sq Typ [ 0.64 ] .21 [5.3] F Typ .24 [6.1] .68 [17.3] .35 [8.9] .12 [3.0] C L "Y" .30 [7.6] E .010 .049 Ref [1.24] .100 Ref [2.54] .020 [0.51] A 2X .100 [2.54] (See Note 2) B C A .197 [5.00] .20 [5.1] Section B-B (Right Angle) TS-0772-02 Sheet 2 of 4 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100 .100 Latch/Ejector Header Table 1 Pn Pin Quantity 10 14 16 20 24 26 30 34 40 50 60 64 3M Part Number 3793 3314 3408 3428 3627 3429 3440 3431 3432 3433 3372 3764 4 Wall, Straight & Right Angle, High Temp Option Dimensions A 1.26 [32.1] 1.46 [37.2] 1.56 [39.7] 1.76 [44.8] 1.96 [49.8] 2.06 [52.4] 2.26 [57.4] 2.46 [62.6] 2.76 [70.2] 3.26 [82.9] 3.76 [95.6] 3.96 [100.7] B 1.105 [28.07] 1.305 [33.15] 1.405 [35.69] 1.605 [40.77] 1.805 [45.85] 1.905 [48.39] 2.105 [53.47] 2.305 [58.55] 2.605 [66.17] 3.105 [78.87] 3.605 [91.57] 3.805 [96.65] C .865 [21.97] 1.065 [27.05] 1.165 [29.59] 1.365 [34.67] 1.565 [39.75] 1.665 [42.29] 1.865 [47.37] 2.065 [52.45] 2.365 [60.07] 2.865 [72.77] 3.365 [85.47] 3.565 [90.55] Table 2 3M Part Number Suffix -5XX2 -6XX2 -5X03 -6X03 -5X05 -6X05 Pin Cross Section Contact Tail C t t T il Solder Tail for .062 [1.57] Thick PC Board Solder Tail for .094 [2.39] to .125 [3.18] Thick PC Board Wire Wrap Tail for up to 3 Levels of Wire Wrap or .116 .106 [2.69] [2.95] (See Note 2) G Dia D .71 [18.0] .91 [23.1] 1.01 [25.6] 1.21 [30.7] 1.41 [35.8] 1.51 [38.3] 1.71 43.43] 1.91 [48.5] 2.21 [56.1] 2.71 [68.8] 3.21 [81.5] 3.41 [86.6] Polar zat on Polarization Notches Provided BC BC ABC ABC ABC ABC ABC ABC ABC ABC ABC ABC Dimension E Di i .112 [2.84] .155 [3.94] .61 Ref [15.5] Dimension F 0.0245 .0005 [0.622] 0.0245 .0005 [0.622] 0.0250 .002 [0.635] Diagonals 0.028 .001 [0.71] 0.028 .001 [0.71] 0.035 .003 [0.90] Corner Radii 0.0075 Ref [0.191] 0.0075 Ref [0.191] 0.003 Max [0.08] Dimension G Di i .035 .003 [0.89] (See Note 3) .035 .003 [0.89] .045 .003 [1.14] .300 [7.62] Side to Side Stackability or .116 .106 [2.69] [2.95] .41 (See Note 2) [10.4] Max to Edge of PCB G Dia for Daisy Chain "Y" C L "Y" C L Position 1 .100 .003 [2.54] .232 [5.89] .060 [1.52] Position 1 .100 .003 [2.54] .352 [8.94] .029 [0.74] .100 .003 [2.54] .100 .003 [2.54] B C Recommended Mounting Hole Pattern (Straight) Recommended Mounting Hole Pattern (Right Angle) Inch [mm] Tolerance Unless Noted .0 Inch .1 .00 .000 .01 .005 Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518). 2. Accepts Rear and Front mounting hardware: Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6, .106 [2.69] dia mounting hole 3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. Refer to TS-0972 for the positions kinked. [ ] Dimensions for Reference only TS-0772-02 Sheet 3 of 4 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100 .100 Latch/Ejector Header Ordering Information 4 Wall, Straight & Right Angle, High Temp Option 30 Microinches Gold Plated Product XXXXX-XXXX Product Material: N = High Temp Blank = Standard Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board 05 = Wrap Posts for up to 3 levels of Wire Wrap (Not available on High Temp version.) 3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight Latch/Ejector System 0 = No Latch/Ejector 4 = Roll Pin Ejectors (3M Part # 3505-4) 5 = Short, Snap-In Latch/Ejectors, (3M Part # 3505-30) 6 = Long, Snap-In Latch/Ejectors (3M Part # 3505-31) 15 Microinches Gold Plated Product XXXXX-XXXXUG Product Material: N = High Temp Blank = Standard Plating Suffix UG = 15 microinch Gold 3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap In Latch/Ejectors (3M Part #3505-30) 6 = Long, Snap In Latch/Ejectors (3M Part #3505-31) TS-0772-02 Sheet 4 of 4 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 |
Price & Availability of 3433-650250WAY
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |