 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free The product itself will remain within RoHS compliant version Descriptions The 67-21 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Material InGaN Emitted Color Blue Resin Color Water Clear Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 1 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Package Dimensions Note: The tolerances unless mentioned is 0.1mm; Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 2 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Absolute Maximum Ratings (Ta=25 Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge (HBM) Operating Temperature Storage Temperature Soldering Temperature VR IF IFP Pd ESD Topr Tstg Tsol ) Rating 5 30 100 110 1000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. Unit V mA mA mW V Symbol Electro-Optical Characteristics (Ta=25 Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 21/2 P d VF IR ) Typ. ----120 468 ----25 --------Max. 565 --------476.5 ----3.70 50 Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V 225 --------- Min. 464.5 ----2.70 ----- Notes: 1.Tolerance of Luminous Intensity : 11% 2.Tolerance of Dominant Wavelength : 1nm 3.Tolerance of Forward Voltage : 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 3 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Bin Range of Luminous Intensity Bin Code S2 T1 T2 U1 Group Bin Code A9 A A10 A11 A12 Min. 225 285 360 450 Min. 464.5 467.5 470.5 473.5 Min. 2.70 2.90 3.10 3.30 3.50 Max. 285 360 450 565 Max. 467.5 470.5 473.5 476.5 Max. 2.90 3.10 3.30 3.50 3.70 V IF=20mA Unit Condition nm IF=20mA Unit Condition mcd IF=20mA Unit Condition Bin Range of Dominant Wavelength Bin Range of Forward Voltage Group Bin Code 10 11 N 12 13 14 Notes: 1.Tolerance of Luminous Intensity : 11% 2.Tolerance of Dominant Wavelength : 1nm 3.Tolerance of Forward Voltage : 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 4 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Typical Electro-Optical Characteristics Spectrum Distribution Ta=25C Relative luminous intensity (%) 100 75 50 25 I F (mA) 50 40 30 20 10 0 2.4 3.8 4.2 2.6 3.0 3.4 Forward Voltage (VF)-volts Forward Current vs. Forward Voltage Ta=25C 0 400 450 500 550 800 Wavelength (nm) Forward Current Relative Luminous Intensity vs. Relative Luminous Intensity (%) Relative Luminous Intensity (%) 1000 Ambient Temperature 1000 Relative Luminous Intensity vs Forward Current Ta=25C f=1KHz Duty=1/10 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 1 10 2 10 Ambient Temperature Ta (C) Forward Current IF(mA) Radiation Diagram 0 10 Ta=25C 20 30 Forward Current Derating Curve 50 Forward Current I (mA) F 40 30 20 10 0 20 40 60 80 100 Ambient Temperature Ta (C) 1.0 0.9 0.8 0.7 40 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 5 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm; Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 6 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is 0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 7 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD No. 1 2 3 4 5 6 7 10% Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Temp. : 260 5 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85%RH Test Hours/Cycles 6 Min. Sample Size 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1 300 Cycles 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 8 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30 or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 9 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0001045 http://www.everlight.com Prepared date: 22-Apr-2008 Rev. 1 Page: 10 of 10 Prepared by: Rita Shen Revision :1 Release Date:2009-03-20 21:45:10.0 Expired Period: Forever LifecyclePhase: |
Price & Availability of 67-21-B7C-AS2U1N-2T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |