 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| User's Manual IE-780233-NS-EM4 Emulation Board Target Device PD780232 Subseries Document No. U14666EJ1V0UM00 (1st edition) Date Published May 2000 N CP(K) (c) 1991 2000 Printed in Japan [MEMO] 2 User's Manual U14666EJ1V0UM00 Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. PC/AT is a trademark of International Business Machines Corporation. * The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or of others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. M7A 98. 8 User's Manual U14666EJ1V0UM00 3 Regional Information Some information contained in this document may vary from country to country. Before using any NEC product in your application, pIease contact the NEC office in your country to obtain a list of authorized representatives and distributors. They will verify: * * * * * Device availability Ordering information Product release schedule Availability of related technical literature Development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, AC supply voltages, and so forth) Network requirements * In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. NEC Electronics Inc. (U.S.) Santa Clara, California Tel: 408-588-6000 800-366-9782 Fax: 408-588-6130 800-729-9288 NEC Electronics (Germany) GmbH Benelux Office Eindhoven, The Netherlands Tel: 040-2445845 Fax: 040-2444580 NEC Electronics Hong Kong Ltd. Hong Kong Tel: 2886-9318 Fax: 2886-9022/9044 NEC Electronics Hong Kong Ltd. NEC Electronics (France) S.A. Velizy-Villacoublay, France Tel: 01-30-67 58 00 Fax: 01-30-67 58 99 Seoul Branch Seoul, Korea Tel: 02-528-0303 Fax: 02-528-4411 NEC Electronics (Germany) GmbH Duesseldorf, Germany Tel: 0211-65 03 02 Fax: 0211-65 03 490 NEC Electronics (France) S.A. NEC Electronics (UK) Ltd. Milton Keynes, UK Tel: 01908-691-133 Fax: 01908-670-290 Spain Office Madrid, Spain Tel: 91-504-2787 Fax: 91-504-2860 NEC Electronics Singapore Pte. Ltd. United Square, Singapore 1130 Tel: 65-253-8311 Fax: 65-250-3583 NEC Electronics Taiwan Ltd. NEC Electronics Italiana s.r.l. Milano, Italy Tel: 02-66 75 41 Fax: 02-66 75 42 99 NEC Electronics (Germany) GmbH Scandinavia Office Taeby, Sweden Tel: 08-63 80 820 Fax: 08-63 80 388 Taipei, Taiwan Tel: 02-2719-2377 Fax: 02-2719-5951 NEC do Brasil S.A. Electron Devices Division Rodovia Presidente Dutra, Km 214 07210-902-Guarulhos-SP Brasil Tel: 55-11-6465-6810 Fax: 55-11-6465-6829 J99.1 4 User's Manual U14666EJ1V0UM00 INTRODUCTION Product Overview The IE-780233-NS-EM4 is designed to be used with the IE-78K0-NS and IE-78K0-NSP01 to debug the following target device that belongs to the 78K/0 Series of 8-bit singlechip microcontrollers. * PD780232 Subseries: PD780232 Target Readers This manual is intended for engineers who will use the IE-780233-NS-EM4 with the IE78K0-NS and IE-78K0-NS-P01 to perform system debugging. Engineers who use this manual are expected to be thoroughly familiar with the target device's functions and use methods and to be knowledgeable about debugging. Organization When using the IE-780233-NS-EM4, refer to not only this manual (supplied with the IE780233-NS-EM4) but also the manual that is supplied with the IE-78K0-NS and IE-78K0NS-P01. IE-78K0-NS User's Manual * Basic specifications * System configuration * External interface functions IE-780233-NS-EM4 User's Manual * General * Part names * Installation * Differences between target devices and target interface circuits IE-78K0-NS-P01 User's Manual * Functional outline Purpose This manual's purpose is to explain various debugging functions that can be performed when using the IE-780233-NS-EM4. User's Manual U14666EJ1V0UM00 5 Terminology Term Emulation device The meanings of certain terms used in this manual are listed below. Meaning This is a general term that refers to the device in the emulator that is used to emulate the target device. It includes the emulation CPU. This is the CPU block in the emulator that is used to execute user-generated programs. This is the device to be emulated (a real chip). This includes the target program and the hardware provided by the user. When defined narrowly, it includes only the hardware. This refers to the combination of the IE-78K0-NS, IE-78K0-NS-P01, and the IE-780233-NS-EM4. Emulation CPU Target device Target system IE system Conventions Data significance: Higher digits on the left and lower digits on the right Note: Caution: Remark: Footnote for item marked with Note in the text Information requiring particular attention Supplementary information Related Documents The related documents (user's manuals) indicated in this publication may include preliminary versions. However, preliminary versions are not marked as such. Document Name Document Number U13731E This manual U12900E U13364E To be prepared IE-78K0-NS IE-780233-NS-EM4 ID78K0-NS Integrated Debugger Reference (WindowsTM Based) PD780232 Subseries IE-78K0-NS-P01 Caution The related documents listed above are subject to change without notice. Be sure to use the latest version of each document for designing. 6 User's Manual U14666EJ1V0UM00 CONTENTS CHAPTER 1 1.1 1.2 1.3 GENERAL ...........................................................................................................................11 System Configuration .................................................................................................................12 Hardware Configuration .............................................................................................................14 Basic Specifications....................................................................................................................15 PART NAMES.....................................................................................................................17 CHAPTER 2 2.1 Parts of Main Unit ........................................................................................................................18 INSTALLATION ..................................................................................................................19 CHAPTER 3 3.1 3.2 Connection...................................................................................................................................20 Clock Settings..............................................................................................................................21 3.2.1 3.2.2 Overview of clock settings ............................................................................................................. 21 Main system clock settings............................................................................................................ 23 3.3 3.4 External Trigger ...........................................................................................................................28 IE-78K0-NS Jumper Settings......................................................................................................29 DIFFERENCES BETWEEN TARGET DEVICES AND TARGET INTERFACE CIRCUITS......................................................................................................31 CHAPTER 4 CHAPTER 5 APPENDIX RESTRICTIONS..................................................................................................................35 EMULATION PROBE PIN ASSIGNMENT TABLE ...............................................................37 User's Manual U14666EJ1V0UM00 7 LIST OF FIGURES Figure No. 1-1 1-2 2-1 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 4-1 4-2 4-3 Title Page System Configuration............................................................................................................................ 12 Basic Hardware Configuration ............................................................................................................... 14 IE-780233-NS-EM4 Part Names ............................................................................................................ 18 Connection of Emulation Probe.............................................................................................................. 20 External Circuits Used as System Clock Oscillator................................................................................... 21 When Using Clock That Is Already Mounted on Emulation Board.............................................................. 22 When Using User-Mounted Clock .......................................................................................................... 22 When Using External Clock ................................................................................................................... 23 Connections on Parts Board (When Using User-Mounted Clock) .............................................................. 24 Crystal Oscillator (When Using User-Mounted Clock) .............................................................................. 26 Pin Alignment of Crystal Oscillator and Socket ........................................................................................ 26 External Trigger Input Position ............................................................................................................... 28 Equivalent Circuit of Emulation Circuit 1 ...........................................................................................................32 Equivalent Circuit of Emulation Circuit 2 ...........................................................................................................32 Equivalent Circuit of Emulation Circuit 3 ...........................................................................................................33 8 User's Manual U14666EJ1V0UM00 LIST OF TABLES Table No. 1-1 3-1 3-2 5-1 A-1 Title Page Basic Specifications...............................................................................................................................15 Main System Clock Settings ...................................................................................................................23 Jumper Settings on IE-78K0-NS .............................................................................................................29 Initial Value of Each Port........................................................................................................................35 NP-80GC Pin Assignments ....................................................................................................................37 User's Manual U14666EJ1V0UM00 9 [MEMO] 10 User's Manual U14666EJ1V0UM00 CHAPTER 1 GENERAL The IE-780233-NS-EM4 is a development tool for efficient debugging of hardware or software when using the following target device that belongs to the 78K/0 Series of 8-bit single-chip microcontrollers. This chapter describes the IE-780233-NS-EM4's system configuration and basic specifications. * Target device * PD780232 Subseries User's Manual U14666EJ1V0UM00 11 CHAPTER 1 GENERAL 1.1 System Configuration Figure 1-1 illustrates the IE-780233-NS-EM4's system configuration. Figure 1-1. System Configuration Debugger ID78K0-NS (sold separately) Device fileNote 1 (sold separately) Control software Host machine PC-9800 Series, IBM PC/ATTM or compatibles Interface board IE-70000-98-IF-C (sold separately) Interface board IE-70000-PC-IF-C (sold separately) Interface board IE-70000-PCI-IF(-A) (sold separately) Interface card or Interface cable Interface cable (NS IF Cable) IE-78K0-NS (sold separately) In-circuit emulator NS CARD Cable MS CARD Cable FG Cable IE-780233-NS-EM4 (This product) AC adapter IE-70000-MC-PS-B (sold separately) Emulation probeNote 2 (sold separately) IE-70000-CD-IF-A (sold separately) Conversion socket/conversion adapterNote 3 (sold separately) 12 User's Manual U14666EJ1V0UM00 CHAPTER 1 GENERAL Notes 1. The device file is as follows, in accordance with the subseries. SxxxxDF780233: PD780232 Subseries 2. The emulation probe is as follows, in accordance with the package. NP-80GC: 80-pin plastic QFP (GC type) The NP-80GC is a product of Naito Densei Machida Mfg. Co., Ltd. For further information, contact Naito Densei Machida Mfg. Co., Ltd. (TEL: +81-44-822-3813) 3. The conversion socket/conversion adapter are as follows, in accordance with the package. EV-9200GC-80: 80-pin plastic QFP (GC type) User's Manual U14666EJ1V0UM00 13 CHAPTER 1 GENERAL 1.2 Hardware Configuration Figure 1-2 shows the IE-780233-NS-EM4's position in the basic hardware configuration. Figure 1-2. Basic Hardware Configuration Dedicated bus interface IE system IE-78K0-NS (sold separately) Host machine Interface board (sold separately) 78K0 main board IE-780233-NS-EM4 Emulation board (This product) Interface card (sold separately) 78K0 I/O board Emulation probe (sold separately) IE-78K0-NS-P01 (sold separately) 14 User's Manual U14666EJ1V0UM00 CHAPTER 1 GENERAL 1.3 Basic Specifications The IE-780233-NS-EM4's basic specifications are listed in Table 1-1. Table 1-1. Basic Specifications Parameter Target device System clock Main system clock supply Description PD780232, 78F0233 Subseries 5.00 MHz External: Input from the target system via an emulation probe Internal: Mounted on the emulation board (5.00 MHz) or mounted on the parts board by the user Not provided Low voltage support User's Manual U14666EJ1V0UM00 15 [MEMO] 16 User's Manual U14666EJ1V0UM00 CHAPTER 2 PART NAMES This chapter introduces the parts of the IE-780233-NS-EM4 main unit. The packing box contains the emulation board (IE-780233-NS-EM4), packing list, user's manual, and guarantee card. If there are any missing or damaged items, please contact an NEC sales representative. Fill out and return the guarantee card that comes with the main unit. User's Manual U14666EJ1V0UM00 17 CHAPTER 2 PART NAMES 2.1 Parts of Main Unit Figure 2-1. IE-780233-NS-EM4 Part Names IE-780233-NS-EM4 TP2 TP1 CN6 (80GC) EXTOUT EXTIN Probe connector CN6 (80GC) Main system clock X1 X1 LED1 IC7 IC7 LED1 18 User's Manual U14666EJ1V0UM00 CHAPTER 3 INSTALLATION This chapter describes methods for connecting the IE-780233-NS-EM4 to the IE-78K0-NS, IE-78K0-NS-P01, emulation probe, etc. Mode setting methods are also described. Caution Connecting or removing components to or from the target system, or making switch or other setting changes must be carried out after the power supply to both the IE system and the target system has been switched OFF. User's Manual U14666EJ1V0UM00 19 CHAPTER 3 INSTALLATION 3.1 Connection (1) Connection with IE-78K0-NS main unit See the IE-78K0-NS User's Manual (U13731E) for a description of how to connect the IE-780233-NS-EM4 to the IE-78K0-NS. (2) Connection with emulation probe See the IE-78K0-NS User's Manual (U13731E) for a description of how to connect an emulation probe to the IE780233-NS-EM4. On this board, connect the emulation probe to CN6. Caution Incorrect connection may damage the IE system. Be sure to read the emulation probe's user's manual for a detailed description of the connection method. Figure 3-1. Connection of Emulation Probe Emulation probe (sold separately) Emulation board 1 (IE-78K0-NS-P01) CN6 80GC Emulation board 2 (IE-780233-NS-EM4) Main board (IE-78K0-NS) 20 User's Manual U14666EJ1V0UM00 CHAPTER 3 INSTALLATION 3.2 Clock Settings 3.2.1 Overview of clock settings The main system clock to be used during debugging can be selected from (1) to (3) below. (1) Clock that is already mounted on emulation board (2) Clock that is mounted by user (3) External clock If the target system includes an internal clock, select either "(1) Clock that is already mounted on emulation board" or "(2) Clock that is mounted by user". For an internal clock, a resonator is connected to the target device and the target device's internal oscillator is used. An example of the external circuit is shown in part (a) of Figure 3-2. During emulation, the resonator that is mounted on the target system is not used. Instead, the clock that is mounted on the emulation board installed for the IE-78K0-NS is used. If the target system includes an external clock, select "(3) External clock". For an external clock, a clock signal is supplied from outside the target device and the target device's internal oscillator is not used. An example of the external circuit is shown in part (b) of Figure 3-2. Caution The IE system will be hung-up if the main system clock is not supplied normally. Moreover, be sure to input a rectangular wave as the clock from the target. The IE system does not operate if the crystal resonator is connected to X1 (main system clock). Figure 3-2. External Circuits Used as System Clock Oscillator (a) Internal clock Target device X1 External clock (b) External clock Target device X1 X2 X2 User's Manual U14666EJ1V0UM00 21 CHAPTER 3 INSTALLATION (1) Clock that is already mounted on emulation board A crystal oscillator (X1) is already mounted on the emulation board. Its frequency is 5.0 MHz. Figure 3-3. When Using Clock That Is Already Mounted on Emulation Board IE-78K0-NS IE-780233-NS-EM4 Mounted oscillator (to be used) Target system Emulation probe Resonator (not used) Remark The clock that is supplied by the IE-780233-NS-EM4's oscillator (encircled in the figure) is used. (2) Clock that is mounted by user The user is able to mount any clock supported by the set specifications on the IE-780233-NS-EM4. Remove the crystal oscillator (X1) that is already mounted on the emulation board, and mount either the parts board on which the resonator to be used is mounted or an oscillator. This method is useful when using a different frequency from that of the pre-mounted clock. Figure 3-4. When Using User-Mounted Clock IE-78K0-NS IE-780233-NS-EM4 Target system Parts board + resonator or oscillator Emulation probe Resonator (not used) Remark The clock that is supplied by the IE-780233-NS-EM4's resonator or oscillator (encircled in the figure) is used. 22 User's Manual U14666EJ1V0UM00 CHAPTER 3 INSTALLATION (3) External clock An external clock connected to the target system can be used via an emulation probe. Figure 3-5. When Using External Clock IE-78K0-NS IE-780233-NS-EM4 Target system Emulation probe Clock generator (to be used) Remark The clock supplied by the target system's clock generator (encircled in the figure) is used. 3.2.2 Main system clock settings Table 3-1. Main System Clock Settings Frequency of Main System Clock IE-780233-NS-EM4 X1 Socket When using clock that is already mounted on emulation board When using clock mounted by user When using external clock 5.0 MHz Oscillator used CPU Clock Source Selection (ID) Internal Other than 5.0 MHz Oscillator assembled by user Oscillator (not used) External Caution When using an external clock, open the configuration dialog box when starting the integrated debugger (ID78K0-NS) and select "External" in the area (Clock) for selecting the CPU's clock source (this selects the user's clock). Remark When the IE-780233-NS-EM4 is shipped, the settings for "when using clock that is already mounted on emulation board" are preset. (1) When using clock that is already mounted on emulation board When the IE-780233-NS-EM4 is shipped, a 5.0 MHz crystal oscillator is already mounted in the IE-780233-NSEM4's X1 socket. When using the factory-set mode settings, there is no need to make any other hardware settings. When starting the integrated debugger (ID78K0-NS), open the configuration dialog box and select "Internal" in the area (Clock) for selecting the CPU's clock source (this selects the emulator's internal clock). User's Manual U14666EJ1V0UM00 23 CHAPTER 3 INSTALLATION (2) When using clock mounted by user The settings described under either (a) or (b) are required, depending on the type of clock to be used. When starting the integrated debugger (ID78K0-NS), open the configuration dialog box and select "Internal" in the area (Clock) for selecting the CPU's clock source (this selects the emulator's internal clock). (a) When using a ceramic resonator or crystal resonator * Items to be prepared * Parts board (supplied with IE-78K0-NS) * Ceramic resonator or crystal resonator * Resistor Rx * Capacitor CA * Capacitor CB * Solder kit 1 2 3 4 5 6 7 14 13 12 11 10 9 8 Pin No. 2-13 3-12 4-11 5-10 8-9 Capacitor CA Capacitor CB Connection Ceramic resonator or crystal resonator Resistor Rx Short Circuit diagram 1 M HCU04 HCU04 5 Rx 10 4 3 CB 12 11 13 CA 2 98 CLOCK OUT Remark The sections enclosed in broken lines indicate parts that are attached to the parts board. 24 User's Manual U14666EJ1V0UM00 CHAPTER 3 INSTALLATION <2> Prepare the IE-780233-NS-EM4. <3> Remove the crystal oscillator that is mounted in the IE-780233-NS-EM4's socket (the socket marked as X1). <4> Connect the parts board (from <1> above) to the socket (X1) from which the crystal oscillator was removed. Check the pin 1 mark to make sure the board is mounted in the correct direction. <5> Make sure that the parts board is wired as shown in Figure 3-6 above. <6> Install the IE-780233-NS-EM4 in the IE-78K0-NS. The above steps configure the following circuit and enable supply of the clock from the mounted resonator to the emulation device. IE-78K0-NS side (Emulation device) 1 M 6 HCU04 HCU04 5 Rx X 4 3 CB 12 11 13 CA 2 10 LVCC HSK120 X1 A B Y 9 8 X1 VHC157 Remark The sections enclosed in broken lines indicate parts that are attached to the parts board. User's Manual U14666EJ1V0UM00 25 CHAPTER 3 INSTALLATION (b) When using a crystal oscillator * Items to be prepared * Crystal oscillator (see pinouts shown in Figure 3-7) Figure 3-7. Crystal Oscillator (When Using User-Mounted Clock) NC VCC GND CLOCK OUT Crystal oscillator NC VCC 1 2 3 4 5 6 GND CLOCK OUT 7 Socket 14 13 12 11 10 9 8 Crystal Oscillator Pin Name NC GND CLOCK OUT VCC Socket Pin No. 1 7 8 14 <4> Install the IE-780233-NS-EM4 in the IE-78K0-NS. 26 User's Manual U14666EJ1V0UM00 CHAPTER 3 INSTALLATION The above steps configure the following circuit and enable supply of the clock from the mounted resonator to the emulation device. VCC IE-78K0-NS side (Emulation device) Crystal oscillator X1 LVCC HSK120 A B Y VHC157 (3) When using external clock No hardware settings are required for this situation. When starting the integrated debugger (ID78K0-NS), open the configuration dialog box and select "External" in the area (Clock) for selecting the CPU's clock source (this selects the user's clock). User's Manual U14666EJ1V0UM00 27 CHAPTER 3 INSTALLATION 3.3 External Trigger To set up an external trigger, connect it to the IE-780233-NS-EM4's check pins EXTOUT and EXTIN as shown below. See the ID78K0-NS User's Manual (U12900E) for descriptions of related use methods and IE-78K0-NS User's Manual (U13731E) for pin characteristics. Figure 3-9. External Trigger Input Position EXTOUT (TP2) EXTIN (TP1) External trigger LED1 CN6 (80GC) IE-780233-NS-EM4 X1 28 User's Manual U14666EJ1V0UM00 CHAPTER 3 INSTALLATION 3.4 IE-78K0-NS Jumper Settings When using the IE-780233-NS-EM4, set the jumpers on the IE-78K0-NS as shown in Table 3-2. For details of these jumper settings, refer to the IE-78K0-NS User's Manual (U13731E). Table 3-2. Jumper Settings on IE-78K0-NS JP2 Setting 2 to 3 shorted JP3 1 to 2 shorted JP4 1 to 2 shorted JP6 5 to 6 shorted JP7 1 to 2 shorted JP8 3 to 4 shorted User's Manual U14666EJ1V0UM00 29 [MEMO] 30 User's Manual U14666EJ1V0UM00 CHAPTER 4 DIFFERENCES BETWEEN TARGET DEVICES AND TARGET INTERFACE CIRCUITS This chapter describes differences between the target device's signal lines and the signal lines of the IE-780233NS-EM4's target interface circuit. Although the target device is a CMOS circuit, the IE-780233-NS-EM4's target interface circuit consists of emulation circuits such as an emulation gate array, TTL, and CMOS-IC. When the IE system is connected with the target system for debugging, the IE system performs emulation so as to operate as the actual target device would operate in the target system. However, some minor differences exist since the operations are performed via the IE system's emulation. (1) Signals input/output to/from the emulation gate array and PD7880 (2) Signals input/output to/from the emulation gate array and PD7881 (3) Other signals The IE-780233-NS-EM4's circuit is used as follows for signals listed in (1) to (3) above. (1) Signals input/output to/from the emulation gate array and PD7880 Refer to Figure 4-1 Equivalent Circuit of Emulation Circuit 1. * ANI3 to ANI0 * P27/SCK3 to P20/SCK1 * AVSS * AVREF (AVDD) * RESET * X1 (2) Signals input/output to/from the emulation gate array and PD7881 Refer to Figure 4-2 Equivalent Circuit of Emulation Circuit 2. * P02/TI to P00/INTP0 * P37/FIP31 to P30/FIP24 * P47/FIP39 to P40/FIP32 * P57/FIP47 to P50/FIP40 * P64/FIP52 to P60/FIP48 * FIP23 to FIP0 * VLOAD (3) Other signals Refer to Figure 4-3 Equivalent Circuit of Emulation Circuit 3. * VDD0 to VDD2 * VSS0, VSS1 * TEST/VPP * X2 User's Manual U14666EJ1V0UM00 31 CHAPTER 4 DIFFERENCES BETWEEN TARGET DEVICES AND TARGET INTERFACE CIRCUITS Figure 4-1. Equivalent Circuit of Emulation Circuit 1 Probe side ANI3 to ANI0 P27/SCK3 to P20/SCK1 IE-780233-NS-EM4 100 100 1 M AVREF (AVDD) PD7880 AVSS LVCC 4066 4.7 k RESET 100 LVCC HKS120 X1 100 1 M HKS120 Emulation gate array Figure 4-2. Equivalent Circuit of Emulation Circuit 2 Probe side P03/TI to P00/INTP0 IE-780233-NS-EM4 100 1 M 100 FIP23 to FIP0 P37/FIP31 to P30/FIP24 P47/FIP39 to P40/FIP32 Photocoupler FPGA 68 k PD7881 Emulation gate array VLOAD P57/FIP47 to P50/FIP40 P64/FIP52 to P60/FIP48 100 Photocoupler FPGA 68 k VLOAD 39 k 32 User's Manual U14666EJ1V0UM00 CHAPTER 4 DIFFERENCES BETWEEN TARGET DEVICES AND TARGET INTERFACE CIRCUITS Figure 4-3. Equivalent Circuit of Emulation Circuit 3 VCC VDD0 to VDD2 100 0.1 F PC393 1 M VSS0 VSS1 TEST/VPP X2 Open User's Manual U14666EJ1V0UM00 33 [MEMO] 34 User's Manual U14666EJ1V0UM00 CHAPTER 5 RESTRICTIONS This chapter describes restrictions in the IE-780233-NS-EM4. When the IE system is started without connecting the target board, the initial value of each port becomes undefined. Table 5-1. Initial Value of Each Port Emulator Initial value of each port Undefined Target CPU 00H User's Manual U14666EJ1V0UM00 35 [MEMO] 36 User's Manual U14666EJ1V0UM00 APPENDIX EMULATION PROBE PIN ASSIGNMENT TABLE Table A-1. NP-80GC Pin Assignments (1/2) Emulation Probe 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 CN1 Pin No. 114 113 108 107 104 103 100 99 94 93 30 29 24 23 20 19 16 15 10 9 37 43 44 47 48 51 52 57 58 59 60 55 Emulation Probe 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 CN1 Pin No. 56 49 50 45 46 41 42 35 8 7 14 13 18 17 22 21 28 27 92 91 98 97 102 101 106 105 112 111 83 77 78 73 Remarks 1. The NP-80GC is a product of Naito Densei Machida Mfg. Co., Ltd. 2. The numbers in the "Emulation Probe" column indicate the corresponding pin number on the emulation probe tip. User's Manual U14666EJ1V0UM00 37 APPENDIX EMULATION PROBE PIN ASSIGNMENT TABLE Table A-1. NP-80GC Pin Assignments (2/2) Emulation Probe 65 66 67 68 69 70 71 72 CN1 Pin No. 74 69 70 63 64 61 62 65 Emulation Probe 73 74 75 76 77 78 79 80 CN1 Pin No. 66 71 72 75 76 79 80 85 Remarks 1. The NP-80GC is a product of Naito Densei Machida Mfg. Co., Ltd. 2. The numbers in the "Emulation Probe" column indicate the corresponding pin number on the emulation probe tip. 38 User's Manual U14666EJ1V0UM00 Facsimile Message From: Name Company Although NEC has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. Despite all the care and precautions we've taken, you may encounter problems in the documentation. Please complete this form whenever you'd like to report errors or suggest improvements to us. Tel. FAX Address Thank you for your kind support. North America Hong Kong, Philippines, Oceania NEC Electronics Inc. NEC Electronics Hong Kong Ltd. Corporate Communications Dept. Fax: +852-2886-9022/9044 Fax: 1-800-729-9288 1-408-588-6130 Korea Europe NEC Electronics Hong Kong Ltd. NEC Electronics (Europe) GmbH Seoul Branch Technical Documentation Dept. Fax: 02-528-4411 Fax: +49-211-6503-274 South America NEC do Brasil S.A. Fax: +55-11-6465-6829 Taiwan NEC Electronics Taiwan Ltd. Fax: 02-2719-5951 Asian Nations except Philippines NEC Electronics Singapore Pte. Ltd. Fax: +65-250-3583 Japan NEC Semiconductor Technical Hotline Fax: 044-548-7900 I would like to report the following error/make the following suggestion: Document title: Document number: Page number: If possible, please fax the referenced page or drawing. Document Rating Clarity Technical Accuracy Organization CS 99.1 Excellent Good Acceptable Poor |
Price & Availability of IE-780233-NS-EM4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |