 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection SDP Series - 5x6 QFN Description This new SIDACtor(R) Series provides overvoltage protection minimal effect on data signals. This latest silicon design innovation results in capacitive loading characteristic that is compatible with these high bandwidth applications. This surface mount QFN package provides a surge capability that exceeds most worldwide intra-building standards and recommendations for lightning surge withstand capability of secondary protectors. Features and Benefits (30MHz) protection Pinout Designation Tip in NC Ground Ring in 1 2 3 4 8 7 6 5 Agency Approvals Agency Agency File Number E133083 surged in excess of ratings Tip out NC Ground Ring out Applicable Global Standards Schematic Symbol Level* Tip Ground Ring *Requires series resistance Electrical Characteristics VDRM @lDRM=5A V min SDP0640Q38B SDP0720Q38B SDP0900Q38B SDP1100Q38B SDP1300Q38B SDP1800Q38B SDP2600Q38B SDP3100Q38B SDP3500Q38B SDP06B SDP07B SDP09B SDP10B SDP13B SDP18B SDP26B SDP31B SDP35B 58 65 75 90 120 170 220 275 320 VS @100V/s V max 77 88 98 130 160 220 300 350 400 IH IS IT A max 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 VT @IT=2.2 Amps V max 8 8 8 8 8 8 8 8 8 Part Number Marking Capacitance mA min mA max 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 See Capacitance vs Voltage Graph Notes: - Absolute maximum ratings measured at TA= 25C (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 35 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection V-I Characteristics +I Capacitance vs. Voltage 50 IT Capacitance (pF) 40 IS IH IDRM +V VT VDRM VS Tip-Ring Tip-GND / Ring-GND 30 -V 20 10 0 0.1 1 Line Voltage (V) 10 100 -I 50/60 Hz Ratings Parameter Name Test Conditions 0.5s 1s 2s 5s 30s 900s Value 6.5 4.6 3.4 2.3 1.3 0.73 Units ITSM Maximum non-repetitive on-state current, 50/60 Hz A Surge Ratings IPP Series 2x10s A min B 250 1.2x50s/8x20s A min 230 10x700/5x310s A min 100 10x1000s A min 75 ITSM 600VRMS 1 Cycle ARMS 25 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP - The device must initially be in thermal equilibrium with -40C < TJ < Thermal Considerations Package 5 x 6 QFN Symbol TJ TSTG R0JA Parameter Junction Temperature Storage Temperature Range Thermal Resistance: Junction to Ambient Value Unit C C 100 C/W (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 36 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature Percent of VS Change - % 10 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 IH (TC = 25C) 14 12 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 C 25C Ratio of Junction Temperature (TJ) - C Case Temperature (TC) - C Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pb-Free assembly (see Fig. 1) Figure 1 Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) TP Ramp-up tP Critical Zone TL to TP 60-180 secs. Temperature Average ramp up rate (Liquidus Temp (TL) to peak) TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Temperature (tL) TL TS(max) Preheat 3C/sec. Max. 3C/sec. Max. 60-150 secs. tL Ramp-down TS(min) tS Peak Temp (TP) Time within 5C of actual Peak Temp (tp) Ramp-down Rate Time 25C to Peak Temp (TP) Do not exceed 30 secs. Max. 6C/sec. Max. 8 min. Max. 25 time to peak temperature (t 25C to peak) Time Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 52 VDC JEDEC, JESD22-A-101 JEDEC, JESD22-A-101 -65C, 1008 hrs. 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Physical Specifications Lead Material Terminal Finish Body Material Copper Alloy 100% Matte-Tin Plated UL recognized epoxy meeting flammability classification 94V-0 Temp Cycling Biased Temp & Humidity High Temp Storage Low Temp Storage Thermal Shock Resistance to Solder Heat Moisture Sensitivity Level (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 37 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Part Numbering Part Marking SDP xxx 0 Q38 B TYPE SIDACtor DSL Protector MEDIAN VOLTAGE CONSTRUCTION VARIABLE IPP RATING PACKAGE TYPE XXXXXX Part Marking Code (Refer to Electrical Characteristics Table) XXXXX Date Code Dimensions -- 5x6 QFN A 5 6 8 Dimension A B B J E 4 G 3 G1 I I D H K L Inches Min 0.187 0.226 0.054 0.165 0.027 0.011 0.047 0.097 0.032 0.027 0.100 0.027 0.015 Max 0.207 0.246 0.064 0.171 0.033 0.017 0.053 0.103 0.038 0.033 0.106 0.033 0.021 Millimeters Min 4.745 5.745 1.374 4.199 0.686 0.279 1.194 2.464 0.800 0.686 2.540 0.686 0.381 Max 5.252 6.253 1.628 4.351 0.838 0.432 1.346 2.616 0.953 0.838 2.692 0.838 0.533 C D E F G G1 H I J PIN 1 INDICATOR F C G1 (REF) G (REF) F (REF) PIN 1 & 8: TIP CONNECTIONS PIN 3 & 6: GROUND CONNECTIONS PIN 4 & 5: RING CONNECTION 5x6 QFN Solder Pad Layout .0200 .0500 K L .2920 .2050 .1180 (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 38 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Packing Options Package Type Q38 Description 5x6x1.5 QFN Tape and Reel Quantity 4000 Added Suffix N/A Industry Standard EIA-481-D Tape and Reel Specifications -- 5x6 QFN Reel Dimension Symbols C A D B W1 N Tape Leader and Trailer Dimensions END CARRIER TAPE COVER TAPE START A B C D N W1 A0 B0 D0 D1 E1 E2 F TRAILER 160mm MIN LEADER 400mm MIN Tape Dimension Items K0 P0 P1 D0 T P0 P2 CARRIER TAPE D1 E1 P2 T W W0 W0 K0 COVER TAPE B0 F E2 W P1 A0 Min Max Min Reel Diameter N/A 12.992 N/A Drive Spoke Width 0.059 N/A 1.50 Arbor Hole Diameter 0.504 0.531 12.80 Drive Spoke Diameter 0.795 N/A 20.20 Hub Diameter 1.969 N/A 50.00 Reel Inner Width at Hub 0.488 0.567 12.40 Pocket Width at Bottom 0.204 0.212 5.20 Pocket Length at Bottom 0.244 0.252 6.20 Feed Hole Diameter 0.059 0.063 1.50 Pocket Hole Diameter 0.059 N/A 1.50 Feed Hole Position 1 0.065 0.073 1.65 Feed Hole Position 2 0.400 0.408 10.15 Feed Hole Center 0.212 0.220 5.40 Pocket Hole Center 2 Pocket Depth 0.067 0.075 1.70 Feed Hole Pitch 0.153 0.161 3.90 Component Spacing 0.311 0.319 7 .90 Feed Hole Center 0.077 0.081 1.90 Pocket Hole Center 1 Carrier Tape Thickness 0.010 0.014 0.25 Embossed Carrier 0.460 0.484 11.70 Tape Width Cover Tape Width 0.358 0.366 9.10 Description Inches Millimeters Max 330.0 N/A 13.50 N/A N/A 14.40 5.40 6.40 1.60 N/A 1.85 10.35 5.60 1.90 4.10 8.10 2.10 0.35 12.30 9.30 (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 39 Revised: February 22, 2011 |
Price & Availability of SDP1300Q38B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |