 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ENGINEERING DATA SHEET SERIES J RELAY - NONLATCH 2 PDT, 12 AMPS All welded construction Contact arrangement Qualified at 10 Amps to 2 PDT MIL-PRF-83536 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 28 Vdc; 115 Vac, 400 Hz, 1 phase and 115/200 Vac, 400 Hz, 3 phases 0.088lb max 1.01in x .51in x 1.00in Weight Dimensions of case Special models available upon request. Hermetically sealed, corrosion resistant metal can. APPLICABLE SOCKET: SO-1049-8309/8987 SO-SSL CONTACT ELECTRICAL CHARACTERISTICS Contact rating per pole and load type [1] Resistive Inductive [3] Motor Lamp Overload Rupture Load current in Amps @28 Vdc 12 8 4 2 40 50 @115 Vac 400 Hz 12 8 4 2 60 80 @115/200 Vac, 400 Hz, 3O 12 8 4 2 60 80 @115/200 Vac, 60 Hz, 3O [2] 2.5 2.5 2 N/A N/A LEACH (R) INTERNATIONAL Solutions for Power Switching and Control North America 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 USA Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 Europe, SA 2 Rue Goethe 57430 Sarralbe France Tel: (33) 3 87 97 98 97 Fax: (33) 3 87 97 84 04 Asia-Pacific Ltd. 20/F Shing Hing Commercial Bldg. 21-27 Wing Kut Street Central, Hong Kong Tel: (852) 2 191 2886 Fax: (852) 2 389 5803 www.leachintl.com Date of issue: 6/02 - 125 - Page 1 of 4 COIL CHARACTERISTICS (Vdc) CODE Nominal operating voltage Maximum operating voltage Maximum pickup voltage - Cold coil at +125 C - During high temp test at +125 C - During continuous current test at +125 C Maximum drop-out voltage Coil resistance 10% at +25 C, except types "C" and "V" +20%, -10% 18 19.8 22.5 7 320 9 9.9 11.25 4.5 80 4.5 5 5.7 2.5 20 36 38 42 14 1000 18 19.8 22.5 7 320 9 9.9 A 28 29 B 12 14.5 C 6 7.3 M 48 50 N [4] 28 29 R [4] 12 14.5 SERIES J V [4] 6 7.3 4.5 5 5.7 2.5 20 11.25 4.5 80 GENERAL CHARACTERISTICS Temperature range Minimum operating cycles (life) at rated load Minimum operating cycles (life) at 25% rated load Dielectric Strength at sea level - All circuits to ground and circuit to circuit Dielectric Strength at sea level - Coil to ground Dielectric Strength at altitude 80,000 ft Insulation resistance - Initial (500 Vdc) Insulation resistance - After environmental tests (500 Vdc) Sinusoidal vibrations (A, D and J mounting) Sinusoidal vibrations (G mounting) Random vibrations - Applicable specification - Method - Test condition - A, D and J Mounting - Test condition - G Mounting (E in Track) - Duration Shocks (A, D and J mounting) Shocks (G mounting) Maximum contact opening time under vibrations and shocks Operate time at nominal voltage@25C Release time at nominal voltage@25C Contact make bounce at nominal voltage@25C Contact release break bounce at nominal voltage@25C Weight maximum MIL-STD-202 214 1G (0.4g2/Hz, 50 to 2000 Hz) 1E (0.2g2/Hz, 50 to 2000 Hz) 15 minutes each plane 200 g / 6 ms 100 g / 6 ms 10 s 10 ms max 10 ms max 1 ms max 0.1 ms max [6] 0.088lb -70C to +125C 100,000 400,000 1250 Vrms 1000 Vrms 500 Vrms [5] 100 M min 50 M min 0.12DA / 10 to 70 Hz 30 g / 70 to 3000 Hz 0.12DA / 10 to 57 Hz 20g /57 to 3000 Hz Unless otherwise noted, the specified temperature range applies to all relay characteristics. Date of issue: 6/02 - 126 - Page 2 of 4 NOTES [1] Standard Intermediate current test applicable. [2] 60 Hz load life, 10,000 cycles. [3] Inductive load life, 20,000 cycles. [4] "N" R & V coils have back EMF suppression to 42 volts maximum. [5] 500 Vrms with silicone gasket compressed, 350 Vrms all other conditions. [6] Applicable to suppressed coils only. 7. Applicable military specification: MIL-PRF-83536. 8. Special models available: Dry circuit, established reliability testing, etc. 9. Time current relay characteristics per MIL-PRF-83536. 10. Relay will not operate, but will not be damaged by application of reverse polarity to coil. SERIES J NUMBERING SYSTEM JA 1 A Basic series designation__________________________| | | | 1-Mounting Style (A,D,G,J)______________________________| | | 2-Terminal Types (1,2,4)____________________________________| | 3-Coil Voltage see coil characteristics (A,B,C,M,N,R or V)______| MOUNTING STYLES Date of issue: 6/02 - 127 - Page 3 of 4 TERMINAL TYPES SERIES J Standard Tolerance: .010 1. Insulator P/N RC-RP800060-5 or RC-RP920060-1 available from Robison Electronics, San Luis Obispo, CA. STANDARD TOL: .010 Date of issue: 6/02 - 128 - Page 4 of 4 ENGINEERING DATA SHEET SO-1049-8309/8987 RELAY SOCKET 12 AMP BASIC SOCKET SERIES DESIGNATION FOR: Series J DESIGNED TO THE STANDARDS AND REQUIREMENTS OF: MIL-S-12883/41 GENERAL CHARACTERISTICS 1. Supplied with mounting hardware and No. 16 contacts, No. 16 crimp (see socket drawing illustration SO-1049-8309); No. 16 contacts, No. 20 crimp for SO-1049-8987 (not illustrated) 2. Standard tolerances 3. Weight 4. Temperature range .xx .01; xxx .005 .073 lb. max -70 C to +125 C LEACH (R) INTERNATIONAL Solutions for Power Switching and Control North America 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 USA Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 Europe, SA 2 Rue Goethe 57430 Sarralbe France Tel: (33) 3 87 97 98 97 Fax: (33) 3 87 97 84 04 Asia-Pacific Ltd. 20/F Shing Hing Commercial Bldg. 21-27 Wing Kut Street Central, Hong Kong Tel: (852) 2 191 2886 Fax: (852) 2 389 5803 www.leachintl.com Date of issue: 6/02 - 11 - Page 1 of 1 ENGINEERING DATA SHEET SO-SSL SOCKET FOR 2 OR 4 POLE 10 AMP SNAP AND LOCK SOCKET SERIES DESIGNATION FOR: SERIES J, JA, K, KA, KL, TDX DESIGNED TO THE STANDARDS AND REQUIREMENTS OF: 2-pole, 10A relays Mates with 4-pole, 10A relays Mates with MIL-PRF-12883/41 M83536, M83726 and MS27709 MIL-PRF-12883/40 M83536 FEATURES 2 POLE Low profile Bottom panel mount Snaps into panel Other models available MATERIALS Socket body Grommet Hardware Contacts Contact retainers Polyetherimide per MIL-P-46184 Silicone rubber per ZZ-R-765 Stainless Steel Copper alloy, hard gold plated per MIL-G-45204 Beryllium copper 4 POLE GENERAL CHARACTERISTICS Insulation resistance Dielectric withstanding voltage Weight Temperature range Vibration Shock 1000 M min. 1500 VRMS sea level; 500 VRMS at 80,000 ft 15.3g max. -65C to +125C MIL-STD-202, Method 204, Test Condition G MIL-STD-202, Method 213, Test Condition C This socket is designed to snap and lock into a panel to reduce hardware requirement and mounting time. Contacts and hardware are provided disassembled in a plastic bag. Standard tolerances are .xx=.01; .xxx=.005 unless otherwise noted. LEACH (R) INTERNATIONAL Solutions for Power Switching and Control North America 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 USA Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 Europe, SA 2 Rue Goethe 57430 Sarralbe France Tel: (33) 3 87 97 98 97 Fax: (33) 3 87 97 84 04 Asia-Pacific Ltd. 20/F Shing Hing Commercial Bldg. 21-27 Wing Kut Street Central, Hong Kong Tel: (852) 2 191 2886 Fax: (852) 2 389 5803 www.leachintl.com Date of issue: 6/02 - 35 - Page 1 of 4 SOCKET DIMENSIONS SO-SSL (2 POLE) TERMINAL LAYOUT Date of issue: 6/02 - 36 - Page 2 of 4 SOCKET DIMENSIONS SO-SSL (4 POLE) TERMINAL LAYOUT Date of issue: 6/02 - 37 - Page 3 of 4 SOCKET NUMBERING SYSTEM SO SSL KA 001 1-Basic socket designation________________________| | | ||| 2-Body style (short snap lock)________________________| | ||| 3-Mating relay (J, JA, K, KA, KL, TDX)____________________| ||| 4-Polarization (see terminal layout)__________________________||| 5-Hardware (0=less hardware, 1=with hardware)__________________|| 6-Contacts (0=less contacts, 1=with contacts)___________________| SERIES SSL Date of issue: 6/02 - 38 - Page 4 of 4 |
Price & Availability of J-A1A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |