 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HIGH-FREQ ALUMINUM ELECTROLYTIC HD SERIES SUBMINIATURE (Radial Lead, Horizontal Deflection) The NTE HD series of aluminum electrolytic non-polarized capacitors are designed specifically for horizontal deflection current correction where high frequency and high ripple current occur. MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL-STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, NTE identification. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are not recommended as they may damage the capacitor. RATINGS Capacitance Range: 1.0f to 10f Tolerance: 20% Voltage Range: 25 Volts and 50 Volts PERFORMANCE SPECIFICATIONS Operating Temperature Range: -25C to +85C (-13F to +185F) Leakage Current: I 0.2CV (measured after 5 minutes of applied rated voltage) I = Leakage Current (A) C = Nominal Capacitance (f) V = Rated Voltage (V) Capacitance Tolerance: 20% (M) measured at +20C (+68F), 1kHZ Load Life: 1000 Hrs @ 12V DC, +70C (+158F), at specified ripple current Leakage Current: Initial specified value or less Dissipation Factor: < 200% of specified value Capacitance Change: Within 15% of initial value Shelf Life: 500 Hrs @ +85C (+185F), no voltage applied Leakage Current: Initial specified value or less Dissipation Factor: < 200% of specified value Capacitance Change: Within 15% of initial value CASE SIZE AND DIMENSIONS: Insulating Sleeve 15.0 Min www..com dO A 0.5 L' 5.0 Min D' O HD Series Dimensions: Diameter (D O) x Length (L): mm Capacitance (f) 1.0 2.2 3.3 4.7 5.6 6.8 8.2 25V and 50V 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 16 x 31.5 16 x 35.5 18 x 35.5 18 x 40 Ripple Current* (Ap-p) 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 ORDERING INFORMATION HD Series Capacitance Tolerance Voltage 4.7 M 50 10.0 * Allowable ripple current @ 70C, 12V DC, and 15.75kHZ HD Mechanical Specs: Dimensions (mm) Outside Diameter (D O) Lead Spacing (A) Lead Wire (d O) 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 NTE Electronics, Inc. D Voice (800) 631-1250 (973) 748-5089 D FAX (973) 748-6224 D http://www.nteinc.com 9 |
Price & Availability of HD47MXX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |